Complete plastic nanofluidic devices for DNA analysis via direct imprinting with polymer stamps

Development of all polymer-based nanofluidic devices using replication technologies, which is a prerequisite for providing devices for a larger user base, is hampered by undesired substrate deformation associated with the replication of multi-scale structures. Therefore, most nanofluidic devices have been fabricated in glass-like substrates or in a polymer resist layer coated on a substrate. This letter presents a rapid, high fidelity direct imprinting process to build polymer nanofluidic devices in a single step. Undesired substrate deformation during imprinting was significantly reduced through the use of a polymer stamp made from a UV-curable resin. The integrity of the enclosed all polymer-based nanofluidic system was verified by a fluorescein filling experiment and translocation/ stretching of lambda-DNA molecules through the nanochannels. It was also found that the funnel-like design of the nanochannel inlet significantly improved the entrance of DNA molecules into nanochannels compared to an abrupt nanochannel/microfluidic network interface.close131

Simple room temperature bonding of thermoplastics and poly(dimethylsiloxane)

We describe a simple and versatile method for bonding thermoplastics to elastomeric polydimethylsiloxane (PDMS) at room temperature. The bonding of various thermoplastics including polycarbonate (PC), cyclic olefin copolymer (COC), polymethylmethacrylate (PMMA), and polystyrene (PS), to PDMS has been demonstrated at room temperature. An irreversible bonding was formed instantaneously when the thermoplastics, activated by oxygen plasma followed by aminopropyltriethoxysilane modification, were brought into contact with the plasma treated PDMS. The surface modified thermoplastics were characterized by water contact angle measurements and Xray photoelectron spectroscopy. The tensile strength of the bonded hybrid devices fabricated with PC, COC, PMMA, and PS was found to be 430, 432, 385, and 388 kPa, respectively. The assembled devices showed high burst resistance at a maximum channel pressure achievable by an in-house built syringe pump, 528 kPa. Furthermore, they displayed very high hydrolytic stability; no significant change was observed even after the storage in water at 37 degrees C over a period of three weeks. In addition, this thermoplastic-to-PDMS bonding technique has been successfully employed to fabricate a relatively large sized device. For example, a lab-on-a-disc with a diameter of 12 cm showed no leakage when it spins for centrifugal fluidic pumping at a very high rotating speed of 6000 rpm.close443

Simple replication methods for producing nanoslits in thermoplastics and the transport dynamics of double-stranded DNA through these slits

Mixed-scale nano-and microfluidic networks were fabricated in thermoplastics using simple and robust methods that did not require the use of sophisticated equipment to produce the nanostructures. High-precision micromilling (HPMM) and photolithography were used to generate mixed-scale molding tools that were subsequently used for producing fluidic networks into thermoplastics such as poly(methyl methacrylate), PMMA, cyclic olefin copolymer, COC, and polycarbonate, PC. Nanoslit arrays were imprinted into the polymer using a nanoimprinting tool, which was composed of an optical mask with patterns that were 2-7 mu m in width and a depth defined by the Cr layer (100 nm), which was deposited onto glass. The device also contained a microchannel network that was hot embossed into the polymer substrate using a metal molding tool prepared via HPMM. The mixed-scale device could also be used as a master to produce a polymer stamp, which was made from polydimethylsiloxane, PDMS, and used to generate the mixed-scale fluidic network in a single step. Thermal fusion bonding of the cover plate to the substrate at a temperature below their respective T(g) was accomplished by oxygen plasma treatment of both the substrate and cover plate, which significantly reduced thermally induced structural deformation during assembly: similar to 6% for PMMA and similar to 9% for COC nanoslits. The electrokinetic transport properties of double-stranded DNA (dsDNA) through the polymeric nanoslits (PMMA and COC) were carried out. In these polymer devices, the dsDNA demonstrated a field-dependent electrophoretic mobility with intermittent transport dynamics. DNA mobilities were found to be 8.2 +/- 0.7 x 10(-4) cm(2) V(-1) s(-1) and 7.6 +/- 0.6 x 10(-4) cm(2) V(-1) s(-1) for PMMA and COC, respectively, at a field strength of 25 V cm(-1). The extension factors for lambda-DNA were 0.46 in PMMA and 0.53 in COC for the nanoslits (2-6% standard deviation).close171

Influence of immobilized biomolecules on magnetic bead plug formation and retention in capillary electrophoresis

Significant changes in the formation and retention of magnetic bead plugs in a capillary during electrophoresis were studied, and it was demonstrated that these effects were due to the type of biological molecule immobilized on the surface of these beads. Three biological molecules, an antibody, an oligonucleotide, and alkaline phosphatase (AP), were attached to otherwise identical streptavidin-coated magnetic beads through biotin-avidin binding in order to isolate differences in bead immobilization in a magnetic field resulting from the type of biological molecule immobilized on the bead surface. AP was also attached to the magnetic beads using epoxy groups on the bead surfaces (instead of avidin-biotin binding) to study the impact of immobilization chemistry. The formation and retention of magnetic bead plugs were studied quantitatively using light scattering detection of magnetic particles eluting from the bead plugs and qualitatively using microscopy. Both the types of biomolecule immobilized on the magnetic bead surface and the chemistry used to link the biomolecule to the magnetic bead impacted the formation and retention of the bead plugs. © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim

LAB-ON-A-DISC FOR SIMULTANEOUS DETERMINATION OF TOTAL PHENOLIC CONTENTS AND ANTIOXIDATN ACTIVITY IN BEVERAGE SAMPLES

We present a fully automated lab-on-a-disc designed for the rapid determination of total phenolic contents (TPC) and antioxidant activity (AA) in beverage samples. Taking advantages of lab-on-a-disc in simple operation, automation, we integrated two methods; Folin-Ciocalteu (FC) method and ferric reducing antioxidant power (FRAP) method for determining TPC and AA, respectively. Compared to a conventional manual TPC and AA detection methods, our platform show reduced analysis time by 9 times for FC and 3 times for FRAP. Our device successfully detected and compared the TPC and AA from 8 different beverage samples including various fruit juice, tea, wine, and beer

Lab-on-a-disc for simultaneous determination of total phenolic content and antioxidant activity of beverage samples

In this paper, we present a fully integrated and automated lab-on-a-disc for the rapid determination of the total phenolic content (TPC) and antioxidant activity (AA) of beverage samples. The simultaneous determinations of TPC and AA on a spinning disc were achieved by integrating three independent analytical techniques: the Folin-Ciocalteu method that is used to measure TPC, the 2,2-diphenyl-1-picrylhydrazyl radical (DPPH) method and the ferric reducing antioxidant power method that are used to measure AA. The TPC and AA of 8 different beverage samples, including various fruit juices, tea, wine and beer, were analyzed. Unlike conventional labor-intensive processes for measuring TPC and AA, our fully automated platform offers one-step operation and rapid analysis.clos

Lab-on-a-disc for simultaneous determination of total phenolic content and antioxidant activity of beverage samples

In this paper, we present a fully integrated and automated lab-on-a-disc for the rapid determination of the total phenolic content (TPC) and antioxidant activity (AA) of beverage samples. The simultaneous determinations of TPC and AA on a spinning disc were achieved by integrating three independent analytical techniques: the Folin-Ciocalteu method that is used to measure TPC, the 2,2-diphenyl-1-picrylhydrazyl radical (DPPH) method and the ferric reducing antioxidant power method that are used to measure AA. The TPC and AA of 8 different beverage samples, including various fruit juices, tea, wine and beer, were analyzed. Unlike conventional labor-intensive processes for measuring TPC and AA, our fully automated platform offers one-step operation and rapid analysis. © 2016 The Royal Society of Chemistry1441sciescopu

Complete plastic nanofluidic devices for DNA analysis via direct imprinting with polymer stamps

Development of all polymer-based nanofluidic devices using replication technologies, which is a prerequisite for providing devices for a larger user base, is hampered by undesired substrate deformation associated with the replication of multi-scale structures. Therefore, most nanofluidic devices have been fabricated in glass-like substrates or in a polymer resist layer coated on a substrate. This letter presents a rapid, high fidelity direct imprinting process to build polymer nanofluidic devices in a single step. Undesired substrate deformation during imprinting was significantly reduced through the use of a polymer stamp made from a UV-curable resin. The integrity of the enclosed all polymer-based nanofluidic system was verified by a fluorescein filling experiment and translocation/stretching of λ-DNA molecules through the nanochannels. It was also found that the funnel-like design of the nanochannel inlet significantly improved the entrance of DNA molecules into nanochannels compared to an abrupt nanochannel/microfluidic network interface

Development of a Simple Reversible-Flow Method for Preparation of Micron-Size Chitosan-Cu(II) Catalyst Particles and Their Testing of Activity

A simple flow system employing a reversible-flow syringe pump was employed to synthesize uniform micron-size particles of chitosan-Cu(II) (CS-Cu(II)) catalyst. A solution of chitosan and Cu(II) salt was drawn into a holding coil via a 3-way switching valve and then slowly pumped to drip into an alkaline solution to form of hydrogel droplets. The droplets were washed and dried to obtain the catalyst particles. Manual addition into the alkaline solution or employment of flow system with a vibrating rod, through which the end of the flow line is inserted, was investigated for comparison. A sampling method was selected to obtain representative samples of the population of the synthesized particles for size measurement using optical microscopy. The mean sizes of the particles were 880 ± 70 µm, 780 ± 20 µm, and 180 ± 30 µm for the manual and flow methods, without and with the vibrating rod, respectively. Performance of the flow methods, in terms of rate of droplet production and particle size distribution, are discussed. Samples of 180 µm size CS-Cu(II) particles were tested for catalytic reduction of 0.5 mM p-nitrophenol to p-aminophenol by 100-fold excess borohydride. The conversion was 98% after 20 min, whereas without the catalyst there was only 14% conversion