1,036 research outputs found
On the feasibility of noncontact ECG measurements
“© © 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.”The article by Kranjec et al. [1], “Novel methods of
noncontact heart rate measurement: A feasibility study” is
interesting and informative as it compares different contactless
methods for heart rate detection. Nevertheless, the use of the
term “capacitively coupled ECG” (CCECG) in the article is
confusing and may mislead readers.
That article studies the feasibility of four noncontact methods
for heart rate measurement, which are classified in
two groups: “the methods measuring electromagnetic energy
generated by the bioelectrical activity within the cardiac
muscle (referred to as direct methods), and the methods
measuring displacement of a part of the subject’s body
caused by the periodic physical contractions of the heart
(referred to as indirect methods). The first group is represented
by a measuring device which detects changes in
surrounding electric field...” [sic]. Later on, this device is
described in [1] as being based on “capacitively coupled electrodes”
and hence termed “CCECG Measuring Device.” The
electrodes are two 48-cm2 metal plates placed side by side
(see [1, Fig. 3]) placed at distances from 5 to 60 cm from the
chest.Peer ReviewedPostprint (author's final draft
Practical considerations regarding results from static and dynamic load testing of bridges
Bridge tests are a helpful tool for bridge assessment and evaluation. Both in the case of a static and dynamic load testing, each element of the test: the load selection and application, the creation of a numerical model to follow the progress of the test or to check the validity of the test results, the measurement process itself and the comparative analysis of experimental results and calculations could be a source of errors in the bridge final evaluation if these errors and uncertainties are not properly considered. The article presents some of the most important factors that may bring errors in the interpretation of the test results and their comparison to targeted values or values derived from a numerical model. This, at the end, may result in the adoption of decisions that are not accurate and appropriate. The selected sources of feasible errors are presented with the division into static and dynamic loading tests. The presented examples of bridge load testing show how the use of improper test methods could lead to significant errors in bridge assessment and evaluation and, consequently, to wrong decisions.Peer ReviewedPostprint (published version
Strong edge features for image coding
A two-component model is proposed for perceptual image coding. For the first component of the model, the watershed operator is used to detect strong edge features. Then, an efficient morphological interpolation algorithm reconstructs the smooth areas of the image from the extracted edge information, also known as sketch data. The residual component, containing fine textures, is separately coded by a subband coding scheme. The morphological operators involved in the coding of the primary component perform very efficiently compared to conventional techniques like the LGO operator, used for the edge extraction, or the diffusion filters, iteratively applied for the interpolation of smooth areas in previously reported sketch-based coding schemes.Peer ReviewedPostprint (published version
Bridge damage detection based on vibration data: past and new developments
Overtime, bridge condition declines due to a number of degradation processes such as creep, corrosion, and cyclic loading, among others. Traditionally, vibration-based damage detection techniques in bridges have focused on monitoring changes to modal parameters. These techniques can often suffer to their sensitivity to changes in environmental and operational conditions, mistaking them as structural damage. Recent research has seen the emergence of more advanced computational techniques that not only allow the assessment of noisier and more complex data but also allow research to veer away from monitoring changes in modal parameters alone. This paper presents a review of the current state-of-the-art developments in vibration-based damage detection in small to medium span bridges with particular focus on the utilization of advanced computational methods that avoid traditional damage detection pitfalls. A case study based on the S101
bridge is also presented to test the damage sensitivity to a chosen methodology.Peer ReviewedPostprint (published version
New approaches to texture coding in segmentation and feature-based image coding schemes
Peer ReviewedPostprint (published version
Coding of details in very low bit-rate video systems
In this paper, the importance of including small image features at the initial levels of a progressive second generation video coding scheme is presented. It is shown that a number of meaningful small features called details should be coded, even at very low data bit-rates, in order to match their perceptual significance to the human visual system. We propose a method for extracting, perceptually selecting and coding of visual details in a video sequence using morphological techniques. Its application in the framework of a multiresolution segmentation-based coding algorithm yields better results than pure segmentation techniques at higher compression ratios, if the selection step fits some main subjective requirements. Details are extracted and coded separately from the region structure and included in the reconstructed images in a later stage. The bet of considering the local background of a given detail for its perceptual selection breaks the concept ofPeer ReviewedPostprint (published version
Prediction error image coding using a modified stochastic vector quantization scheme
The objective of this paper is to provide an efficient and yet simple method to encode the prediction error image of video sequences, based on a stochastic vector quantization (SVQ) approach that has been modified to cope with the intrinsic decorrelated nature of the prediction error image of video signals. In the SVQ scheme, the codewords are generated by stochastic techniques instead of being generated by a training set representative of the expected input image as is normal use in VQ. The performance of the scheme is shown for the particular case of segmentation-based video coding although the technique can be also applied to motion-compensated hybrid coding schemes.Peer ReviewedPostprint (published version
Morphological filter for lossless image subsampling
We present a morphological filter for lossless image subsampling for a given downsampling-upsampling strategy. This filter is applied in a multiresolution decomposition and results in a more efficient scheme for image coding purposes than other lossy sampling schemes. Its main advantage is a greatly reduced computational load compared to multiresolution schemes performed with linear filters.Peer ReviewedPostprint (published version
Development of an integrated remote monitoring technique and its application to para-stressing bridge system
Bridge monitoring system via information technology is capable of providing more accurate knowledge of bridge performance characteristics than traditional strategies. This paper describes not only an integrated Internet monitoring system that consists of a stand-alone monitoring system (SMS) and a Web-based Internet monitoring system (IMS) for bridge maintenance but also its application to para-stressing bridge system as an intelligent structure. IMS, as a Web-based system, is capable of addressing the remote monitoring by introducing measuring information derived from SMS into the system through Internet or intranet connected by either PHS or LAN. Moreover, the key functions of IMS such as data management system, condition assessment, and decision making with the proposed system are also introduced in this paper. Another goal of this study is to establish the framework of a para-stressing bridge system which is an intelligent bridge by integrating the bridge monitoring information into the system to control the bridge performance automatically.Peer ReviewedPostprint (published version
A new approach to texture coding using stochastic vector quantization
A new method for texture coding which combines 2-D linear prediction and stochastic vector quantization is presented in this paper. To encode a texture, a linear predictor is computed first. Next, a codebook following the prediction error model is generated and the prediction error is encoded with VQ, using an algorithm which takes into account the pixels surrounding the block being encoded. In the decoder, the error image is decoded first and then filtered as a whole, using the prediction filter. Hence, correlation between pixels is not lost from one block to another and a good reproduction quality can be achieved.Peer ReviewedPostprint (published version
- …