Near real-time GPS applications for tsunami early warning systems

GPS (Global Positioning System) technology is widely used for positioning applications. Many of them have high requirements with respect to precision, reliability or fast product delivery, but usually not all at the same time as it is the case for early warning applications. The tasks for the GPS-based components within the GITEWS project (German Indonesian Tsunami Early Warning System, Rudloff et al., 2009) are to support the determination of sea levels (measured onshore and offshore) and to detect co-seismic land mass displacements with the lowest possible latency (design goal: first reliable results after 5 min). The completed system was designed to fulfil these tasks in near real-time, rather than for scientific research requirements. The obtained data products (movements of GPS antennas) are supporting the warning process in different ways. The measurements from GPS instruments on buoys allow the earliest possible detection or confirmation of tsunami waves on the ocean. Onshore GPS measurements are made collocated with tide gauges or seismological stations and give information about co-seismic land mass movements as recorded, e.g., during the great Sumatra-Andaman earthquake of 2004 (Subarya et al., 2006). This information is important to separate tsunami-caused sea height movements from apparent sea height changes at tide gauge locations (sensor station movement) and also as additional information about earthquakes' mechanisms, as this is an essential information to predict a tsunami (Sobolev et al., 2007). <br><br> This article gives an end-to-end overview of the GITEWS GPS-component system, from the GPS sensors (GPS receiver with GPS antenna and auxiliary systems, either onshore or offshore) to the early warning centre displays. We describe how the GPS sensors have been installed, how they are operated and the methods used to collect, transfer and process the GPS data in near real-time. This includes the sensor system design, the communication system layout with real-time data streaming, the data processing strategy and the final products of the GPS-based early warning system components

Validation of GPS atmospheric water vapor with WVR data in satellite tracking mode

Slant-integrated water vapor (SIWV) data derived from GPS STDs (slant total delays), which provide the spatial information on tropospheric water vapor, have a high potential for assimilation to weather models or for nowcasting or reconstruction of the 3-D humidity field with tomographic techniques. Therefore, the accuracy of GPS STD is important, and independent observations are needed to estimate the quality of GPS STD. In 2012 the GFZ (German Research Centre for Geosciences) started to operate a microwave radiometer in the vicinity of the Potsdam GPS station. The water vapor content along the line of sight between a ground station and a GPS satellite can be derived from GPS data and directly measured by a water vapor radiometer (WVR) at the same time. In this study we present the validation results of SIWV observed by a ground-based GPS receiver and a WVR. The validation covers 184 days of data with dry and wet humidity conditions. SIWV data from GPS and WVR generally show good agreement with a mean bias of −0.4 kg m−2 and an rms (root mean square) of 3.15 kg m−2. The differences in SIWV show an elevation dependent on an rms of 7.13 kg m−2 below 15° but of 1.76 kg m−2 above 15°. Nevertheless, this elevation dependence is not observed regarding relative deviations. The relation between the differences and possible influencing factors (elevation angles, pressure, temperature and relative humidity) are analyzed in this study. Besides the elevation, dependencies between the atmospheric humidity conditions, temperature and the differences in SIWV are found

Delayed subsidence of the Dead Sea shore due to hydro-meteorological changes

Many studies show the sensitivity of our environment to manmade changes, especially the anthropogenic impact on atmospheric and hydrological processes. The effect on Solid Earth processes such as subsidence is less straightforward. Subsidence is usually slow and relates to the interplay of complex hydro-mechanical processes, thus making relations to atmospheric changes difficult to observe. In the Dead Sea (DS) region, however, climatic forcing is strong and over-use of fresh water is massive. An observation period of 3 years was thus sufficient to link the high evaporation (97 cm/year) and the subsequent drop of the Dead Sea lake level (− 110 cm/year), with high subsidence rates of the Earth’s surface (− 15 cm/year). Applying innovative Global Navigation Satellite System (GNSS) techniques, we are able to resolve this subsidence of the “Solid Earth” even on a monthly basis and show that it behaves synchronous to atmospheric and hydrological changes with a time lag of two months. We show that the amplitude and fluctuation period of ground deformation is related to poro-elastic hydro-mechanical soil response to lake level changes. This provides, to our knowledge, a first direct link between shore subsidence, lake-level drop and evaporation

The convective storm initiation project

Copyright @ 2007 AMSThe Convective Storm Initiation Project (CSIP) is an international project to understand precisely where, when, and how convective clouds form and develop into showers in the mainly maritime environment of southern England. A major aim of CSIP is to compare the results of the very high resolution Met Office weather forecasting model with detailed observations of the early stages of convective clouds and to use the newly gained understanding to improve the predictions of the model. A large array of ground-based instruments plus two instrumented aircraft, from the U.K. National Centre for Atmospheric Science (NCAS) and the German Institute for Meteorology and Climate Research (IMK), Karlsruhe, were deployed in southern England, over an area centered on the meteorological radars at Chilbolton, during the summers of 2004 and 2005. In addition to a variety of ground-based remote-sensing instruments, numerous rawin-sondes were released at one- to two-hourly intervals from six closely spaced sites. The Met Office weather radar network and Meteosat satellite imagery were used to provide context for the observations made by the instruments deployed during CSIP. This article presents an overview of the CSIP field campaign and examples from CSIP of the types of convective initiation phenomena that are typical in the United Kingdom. It shows the way in which certain kinds of observational data are able to reveal these phenomena and gives an explanation of how the analyses of data from the field campaign will be used in the development of an improved very high resolution NWP model for operational use.This work is funded by the National Environment Research Council following an initial award from the HEFCE Joint Infrastructure Fund

Delayed subsidence of the Dead Sea shore due to hydro-meteorological changes

Many studies show the sensitivity of our environment to manmade changes, especially the anthropogenic impact on atmospheric and hydrological processes. The effect on Solid Earth processes such as subsidence is less straightforward. Subsidence is usually slow and relates to the interplay of complex hydro-mechanical processes, thus making relations to atmospheric changes difficult to observe. In the Dead Sea (DS) region, however, climatic forcing is strong and over-use of fresh water is massive. An observation period of 3 years was thus sufficient to link the high evaporation (97 cm/year) and the subsequent drop of the Dead Sea lake level (− 110 cm/year), with high subsidence rates of the Earth’s surface (− 15 cm/year). Applying innovative Global Navigation Satellite System (GNSS) techniques, we are able to resolve this subsidence of the “Solid Earth” even on a monthly basis and show that it behaves synchronous to atmospheric and hydrological changes with a time lag of two months. We show that the amplitude and fluctuation period of ground deformation is related to poro-elastic hydro-mechanical soil response to lake level changes. This provides, to our knowledge, a first direct link between shore subsidence, lake-level drop and evaporation

GPS tomography: validation of reconstructed 3-D humidity fields with radiosonde profiles

Water vapor plays an important role in meteorological applications; GeoForschungsZentrum (GFZ) therefore developed a tomographic system to derive 3-D distributions of the tropospheric water vapor above Germany using GPS data from about 300 ground stations. Input data for the tomographic reconstructions are generated by the Earth Parameter and Orbit determination System (EPOS) software of the GFZ, which provides zenith total delay (ZTD), integrated water vapor (IWV) and slant total delay (STD) data operationally with a temporal resolution of 2.5 min (STD) and 15 min (ZTD, IWV). The water vapor distribution in the atmosphere is derived by tomographic reconstruction techniques. The quality of the solution is dependent on many factors such as the spatial coverage of the atmosphere with slant paths, the spatial distribution of their intersections and the accuracy of the input observations. Independent observations are required to validate the tomographic reconstructions and to get precise information on the accuracy of the derived 3-D water vapor fields. To determine the quality of the GPS tomography, more than 8000 vertical water vapor profiles at 13 German radiosonde stations were used for the comparison. The radiosondes were launched twice a day (at 00:00 UTC and 12:00 UTC) in 2007. In this paper, parameters of the entire profiles such as the wet refractivity, and the zenith wet delay have been compared. Before the validation the temporal and spatial distribution of the slant paths, serving as a basis for tomographic reconstruction, as well as their angular distribution were studied. The mean wet refractivity differences between tomography and radiosonde data for all points vary from −1.3 to 0.3, and the root mean square is within the range of 6.5–9. About 32% of 6803 profiles match well, 23% match badly and 45% are difficult to classify as they match only in parts

Entwicklung und Versuchsbetrieb einer Kombinationssonde zur Ueberwachung von Boeschungsbewegungen. Teilprojekt 2: Entwicklung der Teilkomponente zur Neigungsmessung und der Steuerelektronik sowie des Datenerfassungssystems Abschlussbericht

SIGLEAvailable from TIB Hannover: DtF QN1(76,33) / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Technische InformationsbibliothekBundesministerium fuer Bildung und Forschung (BMBF), Bonn (Germany)DEGerman