95 research outputs found
Deposition reactors for solar grade silicon: a comparative thermal analysis of a Siemens reactor and a fluidized bed reactor
Polysilicon production costs contribute approximately to 25-33% of the overall cost of the solar panels and a similar fraction of the total energy invested in their fabrication. Understanding the energy losses and the behaviour of process temperature is an essential requirement as one moves forward to design and build large scale polysilicon manufacturing plants. In this paper we present thermal models for two processes for poly production, viz., the Siemens process using trichlorosilane (TCS) as precursor and the fluid bed process using silane (monosilane, MS).We validate the models with some experimental measurements on prototype laboratory reactors relating the temperature profiles to product quality. A model sensitivity analysis is also performed, and the efects of some key parameters such as reactor wall emissivity, gas distributor temperature, etc., on temperature distribution and product quality are examined. The information presented in this paper is useful for further understanding of the strengths and weaknesses of both deposition technologies, and will help in optimal temperature profiling of these systems aiming at lowering production costs without compromising the solar cell quality
Estimation of Airborne Vapor Concentrations of Oil Dispersants COREXITâ„¢ EC9527A and EC9500A, Volatile Components Associated with the Deepwater Horizon Oil Spill Response and Clean-up Operations
The Deepwater Horizon (DWH) drilling unit explosion above the Macondo oil well on 20 April 2010 caused the release of approximately 4.9 million barrels (779 million L) of oil into the Gulf of Mexico. As part of a larger spill response and clean-up effort, approximately 1.84 million gallons (6.81 million L) of chemical dispersants COREXIT™ EC9500A and COREXIT™ EC9527A were applied to the resultant oil slicks through spraying on the water surface by plane and by vessel and through injection at the release source near the seabed. The GuLF STUDY is investigating the health effects of workers involved in the oil spill response and clean-up after the DWH explosion, and estimates of possible exposure to chemical dispersants were needed. Exposures were estimated to the volatile components of COREXIT™ EC9500A [petroleum distillates, hydrotreated light, and propylene glycol (PG)] and of COREXIT™ EC9527A [2-butoxyethanol (2-BE) and PG] using two of AIHA IHMOD2.0© mathematical modeling tools along with the dispersants' chemical and physical properties. Monte Carlo simulations were used to reflect uncertainty in input parameters with both the two-box, constant emission model and the near and mid field plume model for indoor and outdoor activities, respectively. Possible exposure scenarios considered various evaporation rates, sizes of the dispersant pool, wind speeds, and ventilation rates. For the two-box model, mean near field exposure estimates to 2-BE ranged from 0.9 to 5.7 ppm, while mean far field estimated exposures ranged from 0.3 to 3.5 ppm. Estimates of mean near field plume model exposures ranged from 0.01 to 3.7 ppm at 2.5 ft from the source, and <0.01 to 0.3 ppm at 10 ft from the source. Estimated exposures to PG were approximately 10% of the calculated 2-BE exposures and exposures to petroleum distillates about 40% higher than the 2-BE estimates. Results indicate that compared with current occupational exposure guidelines, overexposure to petroleum distillates and PG probably did not occur in our study, but under some conditions, for short periods, exposure to 2-BE may have exceeded the limits for peak exposures. These estimates were developed for use in job-exposure matrices to estimate exposures of workers having contact with dispersant vapors for the GuLF STUDY
Exposure Assessment Techniques Applied to the Highly Censored Deepwater Horizon Gulf Oil Spill Personal Measurements
The GuLF Long-term Follow-up Study (GuLF STUDY) is investigating potential adverse health effects of workers involved in the Deepwater Horizon (DWH) oil spill response and cleanup (OSRC). Over 93% of the 160 000 personal air measurements taken on OSRC workers were below the limit of detection (LOD), as reported by the analytic labs. At this high level of censoring, our ability to develop exposure estimates was limited. The primary objective here was to reduce the number of measurements below the labs' reported LODs to reflect the analytic methods' true LODs, thereby facilitating the use of a relatively unbiased and precise Bayesian method to develop exposure estimates for study exposure groups (EGs). The estimates informed a job-exposure matrix to characterize exposure of study participants. A second objective was to develop descriptive statistics for relevant EGs that did not meet the Bayesian criteria of sample size ≥5 and censoring ≤80% to achieve the aforementioned level of bias and precision. One of the analytic labs recalculated the measurements using the analytic method's LOD; the second lab provided raw analytical data, allowing us to recalculate the data values that fell between the originally reported LOD and the analytical method's LOD. We developed rules for developing Bayesian estimates for EGs with >80% censoring. The remaining EGs were 100% censored. An order-based statistical method (OBSM) was developed to estimate exposures that considered the number of measurements, geometric standard deviation, and average LOD of the censored samples for N ≥ 20. For N 80% but enough non-censored measurements to apply Bayesian methods. We used the OBSM for 3% of the estimates and the simple substitution method for 11%. The methods presented here substantially reduced the degree of censoring in the dataset and increased the number of EGs meeting our Bayesian method's desired performance goal. The OBSM allowed for a systematic and consistent approach impacting only the lowest of the exposure estimates. This approach should be considered when dealing with highly censored datasets
Estimation of Aerosol Concentrations of Oil Dispersants COREXITâ„¢ EC9527A and EC9500A during the Deepwater Horizon Oil Spill Response and Clean-up Operations
The April 2010 Deepwater Horizon drilling unit explosion at the Macondo oil well resulted in the release of approximately 779 million l of oil into the Gulf of Mexico. As part of the response effort to break up oil slicks on the water's surface, 6.81 million l of chemical dispersants COREXIT™ EC9500A and COREXIT™ EC9527A were applied by plane or vessel or injected near the seabed. The GuLF Long-term Follow-up Study is investigating possible adverse health effects of workers involved in the oil spill response and clean-up (OSRC). In this paper, we describe potential dispersant-related air concentrations generated from aerial spraying of dispersants to provide insight as to what concentrations OSRC workers may have been exposed under worst-case conditions. Personal exposure measurement data were not collected. Modeling, therefore, was conducted to estimate airborne concentrations of total aerosol to COREXIT™ EC9527A and EC9500A. Using the AgDISP model, we estimated air concentrations to dispersant total aerosols, defined as all components of the dispersant including active ingredients, surfactants, and water, resulting from aerial and vessel applications, as average 1-h and 2-min concentrations. For comparison, 1-h air concentrations associated with aerial spraying were estimated using another model, AERMOD. At 152 m horizontal to the flight path, average 1-h total aerosol concentrations associated with aerial applications were estimated to be as high as 49.3 μg m-3 (9527A) and 45.4 μg m-3 (9500A), and both decreased with increased distance from the flight line. The estimates for spraying 9500A from vessels indicated that total aerosol concentrations were potentially as high as 0.33 μg m-3 at 10 m from the nozzles. These results suggest that personal exposures to dispersant aerosols were negligible
Using Real-Time Area VOC Measurements to Estimate Total Hydrocarbons Exposures to Workers Involved in the Deepwater Horizon Oil Spill
Even though the Deepwater Horizon oil spill response and clean-up (OSRC) had one of the largest exposure monitoring efforts of any oil spill, a number of exposure groups did not have sufficient personal data available or there were gaps in days measured to adequately characterize exposures for the GuLF STUDY, an epidemiologic study investigating the health of the OSRC workers. Area measurements were available from real-time air monitoring instruments and used to supplement the personal exposure measurements. Objectives: The objective was to present a method that used real-time volatile organic compounds (VOCs) area measurements transformed to daily total hydrocarbons (THC) time-weighted averages (TWAs) to supplement THC personal full-shift measurements collected using passive charcoal badges. A second objective was to develop exposure statistics using these data for workers on vessels piloting remotely operated vehicle (ROV) vessels and other marine vessels (MVs) not at the job title level, but at the vessel level. Methods: From hourly vessel averages derived from ~26 million real-time VOC measurements, we estimated full-shift VOC TWAs. Then, we determined the relationship between these TWAs and corresponding full-shift THC personal measurements taken on the same vessel-day. We used this relationship to convert the full-shift VOC measurements to full-shift 'THC' TWA estimates when no personal THC measurements existed on a vessel-day. We then calculated arithmetic means (AMs) and other statistics of THC exposures for each vessel. Results: The VOC-derived estimates substantially supplemented the THC personal measurements, with the number of vessel-days for which we have exposure estimates increasing by ~60%. The estimates of the AMs are some of the highest observed in the GuLF STUDY. As expected, the AMs decreased over time, consistent with our findings on other vessels. Conclusions: Despite the inherent limitations of using real-time area measurements, we were able to develop additional daily observations of personal THC exposures for workers on the ROV vessels and other MVs over time. The estimates likely resulted in more representative estimates of the AMs in the GuLF STUDY. The method used here can be applied in other occupational settings and industries for personal exposure estimation where large amounts of area measurements and more limited numbers of personal measurements are available
Bivariate left-censored Bayesian model for predicting exposure: Preliminary analysis of worker exposure during the deepwater horizon oil spill
In April 2010, the Deepwater Horizon oil rig caught fire and exploded, releasing almost 5 million barrels of oil into the Gulf of Mexico over the ensuing 3 months. Thousands of oil spill workers participated in the spill response and clean-up efforts. The GuLF STUDY being conducted by the National Institute of Environmental Health Sciences is an epidemiological study to investigate potential adverse health effects among these oil spill clean-up workers. Many volatile chemicals were released from the oil into the air, including total hydrocarbons (THC), which is a composite of the volatile components of oil including benzene, toluene, ethylbenzene, xylene, and hexane (BTEXH). Our goal is to estimate exposure levels to these toxic chemicals for groups of oil spill workers in the study (hereafter called exposure groups, EGs) with likely comparable exposure distributions. A large number of air measurements were collected, but many EGs are characterized by datasets with a large percentage of censored measurements (below the analytic methods’ limits of detection) and/or a limited number of measurements. We use THC for which there was less censoring to develop predictive linear models for specific BTEXH air exposures with higher degrees of censoring. We present a novel Bayesian hierarchical linear model that allows us to predict, for different EGs simultaneously, exposure levels of a second chemical while accounting for censoring in both THC and the chemical of interest. We illustrate the methodology by estimating exposure levels for several EGs on the Development Driller III, a rig vessel charged with drilling one of the relief wells. The model provided credible estimates in this example for geometric means, arithmetic means, variances, correlations, and regression coefficients for each group. This approach should be considered when estimating exposures in situations when multiple chemicals are correlated and have varying degrees of censoring
Methods for the Analysis of 26 Million VOC Area Measurements during the Deepwater Horizon Oil Spill Clean-up
The NIEHS GuLF STUDY is an epidemiologic study of the health of workers who participated in the 2010 Deepwater Horizon oil spill response and clean-up effort. Even with a large database of approximately 28 000 personal samples that were analyzed for total hydrocarbons (THCs) and other oil-related chemicals, resulting in nearly 160 000 full-shift personal measurements, there were still exposure scenarios where the number of measurements was too limited to rigorously assess exposures. Also available were over 26 million volatile organic compounds (VOCs) area air measurements of approximately 1-min duration, collected from direct-reading instruments on 38 large vessels generally located near the leaking well. This paper presents a strategy for converting the VOC database into hourly average air concentrations by vessel as the first step of a larger process designed to use these data to supplement full-shift THC personal exposure measurements. We applied a Bayesian method to account for measurements with values below the analytic instrument's limit of detection while processing the large database into average instrument-hour concentrations and then hourly concentrations across instruments on each day of measurement on each of the vessels. To illustrate this process, we present results on the drilling rig ship, the Discoverer Enterprise. The methods reduced the 26 million measurements to 21 900 hourly averages, which later contributed to the development of additional full-shift THC observations. The approach used here can be applied by occupational health professionals with large datasets of direct-reading instruments to better understand workplace exposures
Development of a total hydrocarbon ordinal job-exposure matrix for workers responding to the Deepwater Horizon disaster: The GuLF STUDY
The GuLF STUDY is a cohort study investigating the health of workers who responded to the Deepwater Horizon oil spill in the Gulf of Mexico in 2010. The objective of this effort was to develop an ordinal job-exposure matrix (JEM) of airborne total hydrocarbons (THC), dispersants, and particulates to estimate study participants' exposures. Information was collected on participants' spill-related tasks. A JEM of exposure groups (EGs) was developed from tasks and THC air measurements taken during and after the spill using relevant exposure determinants. THC arithmetic means were developed for the EGs, assigned ordinal values, and linked to the participants using determinants from the questionnaire. Different approaches were taken for combining exposures across EGs. EGs for dispersants and particulates were based on questionnaire responses. Considerable differences in THC exposure levels were found among EGs. Based on the maximum THC level participants experienced across any job held, 1/414% of the subjects were identified in the highest exposure category. Approximately 10% of the cohort was exposed to dispersants or particulates. Considerable exposure differences were found across the various EGs, facilitating investigation of exposure-response relationships. The JEM is flexible to allow for different assumptions about several possibly relevant exposure metrics
Exposure Group Development in Support of the NIEHS GuLF Study
In the GuLF Study, a study investigating possible adverse health effects associated with work on the oil spill response and clean-up (OSRC) following the Deepwater Horizon disaster in the Gulf of Mexico, we used a job-exposure matrix (JEM) approach to estimate exposures. The JEM linked interview responses of study participants to measurement data through exposure groups (EGs). Here we describe a systematic process used to develop transparent and precise EGs that allowed characterization of exposure levels among the large number of OSRC activities performed across the Gulf of Mexico over time and space. EGs were identified by exposure determinants available to us in our measurement database, from a substantial body of other spill-related information, and from responses provided by study participants in a detailed interview. These determinants included: job/activity/task, vessel and type of vessel, weathering of the released oil, area of the Gulf of Mexico, Gulf coast state, and time period. Over 3000 EGs were developed for inhalation exposure and applied to each of 6 JEMs of oil-related substances (total hydrocarbons, benzene, toluene, ethylbenzene, total xylene, and n-hexane). Subsets of those EGs were used for characterization of exposures to dispersants, particulate matter, and oil mist. The EGs allowed assignment to study participants of exposure estimates developed from measurement data or from estimation models through linkage in the JEM for the investigation of exposure-response relationships
Estimates of Inhalation Exposures to Oil-Related Components on the Supporting Vessels During the Deepwater Horizon Oil Spill
The Deepwater Horizon oil spill response and clean-up (OSRC) involved over 9000 large and small vessels deployed in waters of the Gulf of Mexico across four states (Alabama, Florida, Louisiana, and Mississippi). For the GuLF STUDY, we developed exposure estimates of oil-related components for many work groups to capture a wide range of OSRC operations on these vessels, such as supporting the four rig vessels charged with stopping the spill at the wellhead; skimming oil; in situ burning of oil; absorbing and containing oil by boom; and environmental monitoring. Work groups were developed by: (i) vessel activity; (ii) location (area of the Gulf or state); and (iii) time period. Using Bayesian methods, we computed exposure estimates for these groups for: total hydrocarbons measured as total petroleum hydrocarbons (THC), benzene, toluene, ethylbenzene, xylene, and n-hexane (BTEX-H). Estimates of the arithmetic means for THC ranged from 0.10 ppm [95% credible interval (CI) 0.04, 0.38 ppm] in time periods 2 and 3 (16 July-30 September 2010) to 15.06 ppm (95% CI 10.74, 22.41 ppm) in time period 1a (22 April-15 May 2010). BTEX-H estimates were substantially lower (in the parts per billion range). Exposure levels generally fell over time and differed statistically by activity, location, and time for some groups. These exposure estimates have been used to develop job-exposure matrices for the GuLF STUDY
- …