Utilization of the ART approach in a group of public oral health operators in South Africa: a 5-year longitudinal study

Contains fulltext : 80990.pdf (publisher's version ) (Open Access)BACKGROUND: A significant increase in the proportion of restorations to the number of tooth extractions was reported after the introduction of ART in an academic mobile dental service in South Africa. The changes were ascribed to its less threatening procedure. Based on these findings, ART was subsequently introduced into the public oral health service of Ekurhuleni district in the South African province of Gauteng. This article reports on the 5-year restorative treatment pattern of operators in the Ekurhuleni district, who adopted the ART approach into their daily dental practice. METHODS: Of the 21 trained operators, 11 had placed more than 10% of restorations using ART at year 1 and were evaluated after 5 years. Data, including number of restored and extracted teeth and type of restoration, were drawn from clinical records 4 months before, and up to 5 years after training. The restoration/extraction ratio (REX score) and the proportion of ART restorations to the total number of restorations were calculated. The paired sample t-test and linear regression analysis were applied. RESULTS: The mean percentage of ART restorations after 1 year was 24.0% (SE 7.2) and significantly increased annually to 42.7% (SE 9.2) after 5 years in permanent dentitions. In primary dentitions the mean percentage of ART restorations after 1 year was 80.6% (SE 4.9) and 72.6% (SE 8.8) after 5 years. The mean REX score before ART training was 0.08 (SE 0.03) and 0.07 (SE 0.04) for permanent and primary teeth, respectively and 0.11 (SE 0.03) and 0.17 (SE 0.05) after 5 years. CONCLUSION: Five years after training, ART had been used consistently in this selected group of operators as the predominant restorative treatment used for primary teeth and showed a significant annual increase in permanent teeth. However, this change had not resulted in an increase in the REX score in both dentitions

Absence of carious lesions at margins of glass-ionomer cement and amalgam restorations: An update of systematic review evidence

<p>Abstract</p> <p>Background</p> <p>This article aims to update the existing systematic review evidence elicited by Mickenautsch et al. up to 18 January 2008 (published in the European Journal of Paediatric Dentistry in 2009) and addressing the review question of whether, in the same dentition and same cavity class, glass-ionomer cement (GIC) restored cavities show less recurrent carious lesions on cavity margins than cavities restored with amalgam.</p> <p>Methods</p> <p>The systematic literature search was extended beyond the original search date and a further hand-search and reference check was done. The quality of accepted trials was assessed, using updated quality criteria, and the risk of bias was investigated in more depth than previously reported. In addition, the focus of quantitative synthesis was shifted to single datasets extracted from the accepted trials.</p> <p>Results</p> <p>The database search (up to 10 August 2010) identified 1 new trial, in addition to the 9 included in the original systematic review, and 11 further trials were included after a hand-search and reference check. Of these 21 trials, 11 were excluded and 10 were accepted for data extraction and quality assessment. Thirteen dichotomous datasets of primary outcomes and 4 datasets with secondary outcomes were extracted. Meta-analysis and cumulative meta-analysis were used in combining clinically homogenous datasets. The overall results of the computed datasets suggest that GIC has a higher caries-preventive effect than amalgam for restorations in permanent teeth. No difference was found for restorations in the primary dentition.</p> <p>Conclusion</p> <p>This outcome is in agreement with the conclusions of the original systematic review. Although the findings of the trials identified in this update may be considered to be less affected by attrition- and publication bias, their risk of selection- and detection/performance bias is high. Thus, verification of the currently available results requires further high-quality randomised control trials.</p

Impact of Atraumatic Restorative Treatment (ART) on the treatment profile in pilot government dental clinics in Tanzania

\ud The predominant mode of treatment in government dental clinics in Tanzania has been tooth extraction because the economy could not support the conventional restorative care which depends on expensive equipment, electricity and piped water systems. Atraumatic Restorative Treatment (ART) was perceived as a suitable alternative. A 3.5-year study was designed to document the changes in the treatment profiles ascribed to the systematic introduction of ART in pilot government dental clinics. Dental practitioners who were working in 13 government dental clinics underwent a 7-day ART training. Treatment record data on teeth extracted and teeth restored by the conventional and ART approaches were collected from these clinics for the three study periods. The mean percentage of ART restorations to total treatment, ART restorations to total restorations, and total restorations to total treatments rendered were computed. Differences between variables were determined by ANOVA, t-test and Chi-square. The mean percentage of ART restorations to total treatment rendered was 0.4 (SE = 0.5) and 11.9 (SE = 1.1) during the baseline and second follow-up period respectively (ANOVA mixed model; P < 0.0001). The mean percentage of ART restorations to total restorations rendered at baseline and 2nd follow-up period was 8.4% and 88.9% respectively (ANOVA mixed model; P < 0.0001). The mean percentage of restorations to total treatment rendered at baseline and 2nd follow-up was 3.9% and 13.0%, respectively (ANOVA mixed model; P < 0.0001). Ninety-nine percent of patients were satisfied with ART restorations, 96.6% willing to receive ART restoration again in future, and 94.9% willing to recommend ART treatment to their close relatives. ART introduction in pilot government dental clinics raised the number of teeth saved by restorative care. Countrywide introduction of the ART approach in Tanzania is recommended\u

Two years survival rate of class II composite resin restorations prepared by ART with and without a chemomechanical caries removal gel in primary molars

The aim was to test the null hypotheses that there is no difference: (1) in carious lesion development at the restoration margin between class II composite resin restorations in primary molars produced through the atraumatic restorative treatment (ART) with and without a chemomechanical caries removal gel and (2) in the survival rate of class II composite resin restorations between two treatment groups after 2 years. Three hundred twenty-seven children with 568 class II cavitated lesions were included in a parallel mouth study design. Four operators placed resin composite (Filtek Z 250) restorations bonded with a self-etch adhesive (Adper prompt L pop). Two independent examiners evaluated the restorations after 0.5, 1, and 2 years using the modified Ryge criteria. The Kaplan–Meier survival method was applied to estimate survival percentages. A high proportion of restorations were lost during the study period. Therefore, the first hypothesis could not be tested. No statistically significant difference was observed between the cumulative survival percentages of restorations produced by the two treatment approaches over the 2-year period (ART, 54.1 ± 3.4%; ART with Carisolv™, 46.0 ± 3.4%). This hypothesis was accepted. ART with chemomechanical gel might not provide an added benefit increasing the survival percentages of ART class II composite resin restorations in primary teeth

Three-year survival of single- and two-surface ART restorations in a high-caries child population

The aim of this study was to evaluate the survival of single- and two-surface atraumatic restorative treatment (ART) restorations in the primary and permanent dentitions of children from a high-caries population, in a field setting. The study was conducted in the rainforest of Suriname, South America. ART restorations, made by four Dutch dentists, were evaluated after 6 months, 1, 2, and 3 years. Four hundred seventy-five ART restorations were placed in the primary dentition and 54 in first permanent molars of 194 children (mean age 6.09 ± 0.48 years). Three-year cumulative survivals of single- and two-surface ART restorations in the primary dentition were 43.4 and 12.2%, respectively. Main failure characteristics were gross marginal defects and total or partial losses. Three-year cumulative survival for single-surface ART restorations in the permanent dentition was 29.6%. Main failure characteristics were secondary caries and gross marginal defects. An operator effect was found only for two-surface restorations. The results show extremely low survival rates for single- and two-surface ART restorations in the primary and permanent dentitions. The variable success for ART may initiate further discussion about alternative treatment strategies, especially in those situations where choices have to be made with respect to a well-balanced, cost-effective package of basic oral health care

Valvular heart disease: what does cardiovascular MRI add?

Although ischemic heart disease remains the leading cause of cardiac-related morbidity and mortality in the industrialized countries, a growing number of mainly elderly patients will experience a problem of valvular heart disease (VHD), often requiring surgical intervention at some stage. Doppler-echocardiography is the most popular imaging modality used in the evaluation of this disease entity. It encompasses, however, some non-negligible constraints which may hamper the quality and thus the interpretation of the exam. Cardiac catheterization has been considered for a long time the reference technique in this field, however, this technique is invasive and considered far from optimal. Cardiovascular magnetic resonance imaging (MRI) is already considered an established diagnostic method for studying ventricular dimensions, function and mass. With improvement of MRI soft- and hardware, the assessment of cardiac valve function has also turned out to be fast, accurate and reproducible. This review focuses on the usefulness of MRI in the diagnosis and management of VHD, pointing out its added value in comparison with more conventional diagnostic means

Ischemic patterns assessed by positron emission tomography predict adverse outcome in patients with idiopathic dilated cardiomyopathy

Although patients with idiopathic dilated cardiomyopathy (DCM) have no coronary artery disease, regional impairment of myocardial perfusion combined with preserved metabolism has been found using positron emission tomography (PET). Our aim was to assess the prognostic relevance of PET-mismatch between stress myocardial perfusion and glucose uptake on clinical outcome in DCM. In 24 patients with DCM who underwent both myocardial perfusion and metabolism PET scanning, "mismatch" was assessed and the association with clinical outcome (hospitalization, mortality, and heart transplantation) was investigated. Mismatch was found in 16 patients (66.7%). Univariate analysis showed that the presence of mismatch was associated with adverse outcome (P = 0.03). After adjustment for sex and age, the association remained significant with an adjusted relative risk of 10.4 (95% CI 1.1-103; P = 0.04) for death, heart transplant, or hospitalization. Univariate analysis also showed that a higher extent of mismatch was significantly associated with adverse outcome (P = 0.02). After adjusting for sex and age, the association remained significant with an adjusted relative risk of 6.5 [95% CI 1.2-36; P = 0.03] for death, heart transplantation, or hospitalization. PET stress perfusion-metabolism mismatch, indicative for ischemia, is frequently found in DCM patients and related to a poorer outcome

Heart Valve Tissue Engineering: Concepts, Approaches, Progress, and Challenges

Potential applications of tissue engineering in regenerative medicine range from structural tissues to organs with complex function. This review focuses on the engineering of heart valve tissue, a goal which involves a unique combination of biological, engineering, and technological hurdles. We emphasize basic concepts, approaches and methods, progress made, and remaining challenges. To provide a framework for understanding the enabling scientific principles, we first examine the elements and features of normal heart valve functional structure, biomechanics, development, maturation, remodeling, and response to injury. Following a discussion of the fundamental principles of tissue engineering applicable to heart valves, we examine three approaches to achieving the goal of an engineered tissue heart valve: (1) cell seeding of biodegradable synthetic scaffolds, (2) cell seeding of processed tissue scaffolds, and (3) in-vivo repopulation by circulating endogenous cells of implanted substrates without prior in-vitro cell seeding. Lastly, we analyze challenges to the field and suggest future directions for both preclinical and translational (clinical) studies that will be needed to address key regulatory issues for safety and efficacy of the application of tissue engineering and regenerative approaches to heart valves. Although modest progress has been made toward the goal of a clinically useful tissue engineered heart valve, further success and ultimate human benefit will be dependent upon advances in biodegradable polymers and other scaffolds, cellular manipulation, strategies for rebuilding the extracellular matrix, and techniques to characterize and potentially non-invasively assess the speed and quality of tissue healing and remodeling