Introducing clustering model for auto parts manufacturing companies

The index of development of every country is measured by the amount of its industrialization. The comparative statistics show that the level of industrial GDP in developed countries is much higher than in Iran. The influence of automotive industry on the redevelopment of satellite sectors such as steel, rubber, Polymer, petrol and petrochemicals, electrical and electronics, ceramics and etc. is very high. In view of the fact that the cluster system defines a collection of united small and medium enterprises which are distributed in a particular region, these companies do face with global and local threats, and opportunities in manufacturing of their products. In particular, the auto industry as one of the most important sector in the region qualifies for the application of clustering method, in order to unify efforts of the SME companies. A suitable cluster model if carefully applied, can result in increasing output and quality of parts, decreasing overhead costs, specialization of skills, increase of employment, equal opportunities and etc. This paper represents a thorough study of all SME’s for auto parts manufacturers in North West province of Azerbaijan. On the basis of these finding and the studies carried out, a suitable Cluster model within UNIDO requirements has been devised and developed, to suit the needs of all SME’s auto parts manufacturers in the region. The paper discusses and analysis the cluster model in details

Arrest stress of uniformly sheared wet granular matter

We conduct extensive independent numerical experiments considering frictionless disks without internal degrees of freedom (rotation etc.) in two dimensions. We report here that for a large range of the packing fractions below random-close packing, all components of the stress tensor of wet granular materials remain finite in the limit of zero shear rate. This is direct evidence for a fluid-to-solid arrest transition. The offset value of the shear stress characterizes plastic deformation of the arrested state {which corresponds to {\em dynamic yield stress} of the system}. {Based on an analytical line of argument, we propose that the mean number of capillary bridges per particle, $\nu$, follows a non-trivial dependence on the packing fraction, $\phi$, and the capillary energy, \vareps. Most noticeably, we show that $\nu$ is a generic and universal quantity which does not depend on the driving protocol.} Using this universal quantity, we calculate the arrest stress, $\sigma_a$, analytically based on a balance of the energy injection rate due to the external force driving the flow and the dissipation rate accounting for the rupture of capillary bridges. The resulting prediction of $\sigma_a$ is a non-linear function of the packing fraction $\phi$, and the capillary energy \vareps. This formula provides an excellent, parameter-free prediction of the numerical data. Corrections to the theory for small and large packing fractions are connected to the emergence of shear bands and of contributions to the stress from repulsive particle interactions, respectively.Comment: 7 pages, g figure

Content validity of national post marriage educational program using mixed methods

Background: Although the validity of content of program is mostly conducted with qualitative methods, this study used both qualitative and quantitative methods for the validation of content of post marriage training program provid-ed for newly married couples. Content validity is a preliminary step of obtaining authorization required to install the program in country's health care system. Methods: This mixed methodological content validation study carried out in four steps with forming three expert panels. Altogether 24 expert panelists were involved in 3 qualitative and quantitative panels; 6 in the first item devel-opment one; 12 in the reduction kind, 4 of them were common with the first panel, and 10 executive experts in the last one organized to evaluate psychometric properties of CVR and CVI and Face validity of 57 educational objectives. Results: The raw data of post marriage program had been written by professional experts of Ministry of Health, using qualitative expert panel, the content was more developed by generating 3 topics and refining one topic and its respec-tive content. In the second panel, totally six other objectives were deleted, three for being out of agreement cut of point and three on experts' consensus. The validity of all items was above 0.8 and their content validity indices (0.8-1) were completely appropriate in quantitative assessment. Conclusion: This study provided a good evidence for validation and accreditation of national post marriage program planned for newly married couples in health centers of the country in the near future. © 2015, Iranian Journal of Public Health. All right reserved

Clamp-Crushing versus stapler hepatectomy for transection of the parenchyma in elective hepatic resection (CRUNSH) - A randomized controlled trial (NCT01049607)

<p>Abstract</p> <p>Background</p> <p>Hepatic resection is still associated with significant morbidity. Although the period of parenchymal transection presents a crucial step during the operation, uncertainty persists regarding the optimal technique of transection. It was the aim of the present randomized controlled trial to evaluate the efficacy and safety of hepatic resection using the technique of stapler hepatectomy compared to the simple clamp-crushing technique.</p> <p>Methods/Design</p> <p>The CRUNSH Trial is a prospective randomized controlled single-center trial with a two-group parallel design. Patients scheduled for elective hepatic resection without extrahepatic resection at the Department of General-, Visceral- and Transplantation Surgery, University of Heidelberg are enrolled into the trial and randomized intraoperatively to hepatic resection by the clamp-crushing technique and stapler hepatectomy, respectively. The primary endpoint is total intraoperative blood loss. A set of general and surgical variables are documented as secondary endpoints. Patients and outcome-assessors are blinded for the treatment intervention.</p> <p>Discussion</p> <p>The CRUNSH Trial is the first randomized controlled trial to evaluate efficacy and safety of stapler hepatectomy compared to the clamp-crushing technique for parenchymal transection during elective hepatic resection.</p> <p>Trial Registration</p> <p>ClinicalTrials.gov: <a href="http://www.clinicaltrials.gov/ct2/show/NCT01049607">NCT01049607</a></p

Biopathologic Characterization of Three Mixed Poultry Eimeria spp. Isolates

Background: Coccidiosis of domestic fowl, caused by species of the Genus Eimeria, is responsi­ble for important economic losses in poultry production. Because different species and/or strains can vary in pathogenicity and other biological parameters, their precise characteriza­tion is important for epizootiological studies.Methods: Fifty samples from litter, whole intestinal tract and feces were collected from poul­try houses located in different provinces of Iran. One hundred twenty male day-old broi­ler chicks were challenged with three selected isolates. Data on weight gain, Food Conversion Ratio (FCR), food intake, lesion scoring and shedding of oocysts per gram of feces were rec­orded and analyzed by the Duncan's test.Results: In all treatments, the challenged groups had statistically significant lower weight gain than that of unchallenged control group. Isolate three caused the lowest weight gain and food intake and the worst lesion score as well as FCR. Despite originating from close geographi­cal regions for isolates 1 and 2, the difference in biopathologic factors may be either due to different proportion of identified species or the different pathogenicity of the species present in the isolates.Conclusion: The results highlight the importance of considering various species of Eimeria in designing the preventive, control and treatment strategies to prevent coccidiosis in different regions of Iran. Further characterization of each isolate would be the next step to provide a basis for coccidiosis research with well-characterized local isolates

Effect of different additives on the physical and chemical CO 2 absorption in polyetherimide hollow fiber membrane contactor system

Porous asymmetric polyetherimide (PEI) hollow fiber membranes were fabricated via a phase-inversion method using ethanol, glycerol and acetone as the additives in the spinning dope. Also, hollow fiber PEI membrane without additives was fabricated. An aqueous solution of 1-methyl-2-pyrrolidone (80 wt.%) was used as bore fluid to prevent forming of an inner dense skin layer. The precipitation rate of the polymer dopes with the different additives was studied using cloud point measurement. The effect of the additives on the resulting membrane structure, surface porosity, pore size, critical water entry pressure, collapsing pressure and physical and chemical CO2 absorption performance by distilled water and NaOH (1 M) solution in a gas–liquid membrane contactor system were investigated and compared. Cloud point diagrams indicated that the precipitation rate of the polymer dopes increased following the trend of ethanol > acetone > glycerol. Results of gas permeation tests showed that ethanol and glycerol as additives provided the membranes with the largest and smallest pore size, respectively. Moreover, all the additives resulted in an increase in the effective surface porosity. The cross-section of the membranes was examined via a scanning electron microscopy. Ethanol in the spinning dope provided the membrane structure with a sublayer with finger-like macrovoids, originating from the inner and outer surfaces of the hollow fiber and extending to the middle section of the hollow fiber wall, which resulted in a larger pore size and higher CO2 absorption rate than the other PEI hollow fiber membranes

Roundtable: Affordances, Diversity, and Inclusion on Dating Apps - A Dialogue between Sociologists and Media Studies Researchers about ‘Hinge’

This roundtable paper is part of the project ‘Digitized Love and Intimacy on Hinge.’ It aims to investigate how digital dating apps reconfigure cultural attitudes to love and intimacy and, conversely, how said attitudes influence digital dating practices. The conversation is informed by (n)ethnographic usage of the app. As algorithms and affordances of dating applications can implicitly or explicitly privilege certain groups of users and exclude others, this conversation mainly aims to make sense of how Hinge’s interface – or ‘affordances’– facilitates the dating process and how inclusive and diverse the application’s affordances are. We discuss that there is a contradiction between what Hinge portrays itself to be and what it practically ends up being, partly because of its affordances. This roundtable highlights the need to study affordances as relational technologies and to take the perceptions, ideas, and interpretations of users seriously alongside the actual features and designs offered by applications

Serological survey and comparison of two polymerase chain reaction (PCR) assays with enzyme-linked immunosorbent assay (ELISA) for the diagnosis of canine visceral leishmaniasis in dogs

Visceral leishmaniasis (VL) is systemic zoonotic parasitic infection that is a health problem in some tropical and subtropical countries. The purpose of our study is to determine the seroprevalence of canine visceral leishmaniasis (CVL) in owned dogs of the Sarab area and to identify the species of Leishmania isolated from these dogs. We also compared the sensitivities and specificities of two polymerase chain reaction (PCR) assays (kDNA and ITS1) used for Leishmania infantum identification with culture, microscopic detection and enzyme-linked immunosorbent assay (ELISA) methods as well as validate the PCR techniques for the molecular diagnosis of CVL. Sera from 384 dogs of 30 villages around Sarab, were tested by ELISA and buffy coat blood fractions after sampling tested with PCR by specific primers (kDNA, ITS-18sRNA). Thirty-five dogs were seropositive by ELISA. The seroprevalence rate (SPR) of CVL was 9.1% (CI, 95% 6.6 -12.4). The most important serological result was a high proportion of seropositivity for leishmaniasis. Out of 361 (94%) asymptomatic dogs, 31 (8.6%) were seropositive, and out of 23 (6%) symptomatic dogs, 4 (17.4%) were seropositive. Agreement betweenthe ELISA test and clinical signs was 86.7%. Each assay was performed on 60 blood samples. PCR of kDNA (7/60 positives, 11.8%) was the most sensitive of the assays examined, followed by ELISA (3/60, 5%) and ITS1-PCR (2/60, 3.4 %). All diagnostic assays were highly specific (100 %) and had positive predictive values (PPV) &gt;90% and negative predictive values (NPV) &gt;88% for CVL. As expected, kDNAPCR proved to be the most sensitive (87.5 %) assay for leishmanial DNA in peripheral blood. This study shows that kDNA-PCR is significantly more sensitive than the other parasitological and serological methods, allowing the identification of infected dogs even before the appearance of serum L. infantum antibodies. Because kDNA-PCR is the most reliable, sensitive, and also a rapid diagnostic assay for CVL, it should be employed as the new standard for routine diagnosis.Key words: Leishmania infantum, polymerase chain reaction, kinetoplast DNA, enzyme-linked immunosorbent assay, Visceral leishmaniasis, dogs, prevalence

Study on hybrid combustion of aero-suspensions of boron-aluminum powders in a quiescent reaction medium

© 2017. The present research deals with a hybrid combustion of aluminum/boron dust particles in a heterogeneous quiescent reaction medium with spatially discrete heat sources. A developed thermal model is employed to estimate flame propagation speed in a reaction medium. The burning velocity and minimum ignition energy are studied parametrically as a function of dust concentration and particle diameter for different percentages of boron powder in a hybrid mixture of aluminum/boron dust cloud. The model shows that the addition of boron powder as a component of the mixture decreases the burning rate and causes a higher amount of minimum ignition energy needed for ignition, owing to the role of boron as a heat sink. Comparison of the simulation results with the available experimental data shows that the model captures the flame propagation speed as a function of particle concentration, except at very low concentrations