5 research outputs found
Amphiphilic block copolymers as stabilizers in emulsion polymerization: Effects of molecular weight dispersity and evidence of self-folding behavior
Emulsion polymerizations, used to produce many commodity materials, require stabilizing agents to prevent phase separation. Incorporation of these stabilizers in the final polymer may have negative effects on product properties, so the design of new stabilizers is being actively pursued. Amphiphilic diblock copolymers are a promising type of emulsion polymerization stabilizer and are the focus of this work (Fig. 1). First, the tolerance of an amphiphilic diblock copolymer stabilizer’s performance to high molecular weight dispersity and homopolymer impurity has been investigated. Polystyrene-b-poly(acrylic acid) block copolymers were studied due to their previously demonstrated efficacy as stabilizers in emulsion polymerization, and their similarity to commercially important polystyrene-r-poly(acrylic acid) stabilizers. Neither greater molecular weight dispersity nor homopolymer impurity was found to negatively impact the stabilization performance of these block copolymers, suggesting that the economically unfavorable conditions required to achieve low molecular weight dispersity and homopolymer impurity may be avoided. We then examined novel polystyrene-b-[polystyrene-r-poly(acrylic acid)] block-random copolymers which were shown to stabilize emulsion polymerizations with up to 50 weight percent solids content, exceeding what was possible using the polystyrene-b-poly(acrylic acid) block copolymers. Of even greater significance and scientific value is that the block-random copolymers were also observed to have unusual solution behavior, self-folding rather than self-assembling, to give single chain nanoparticles. Emulsion polymerizations stabilized by these block-random copolymers had a total particle surface area which was directly proportional to the stabilizer concentration and was unaffected by polymerization kinetics. A novel “seeded-coagulative” emulsion polymerization mechanism has been proposed to explain these results, which were unexplainable by any known emulsion polymerization mechanism.
Please click Additional Files below to see the full abstrac
Compositional analysis of lignocellulosic biomass: conventional methodologies and future outlook
<p>The composition and structural properties of lignocellulosic biomass have significant effects on its downstream conversion to fuels, biomaterials, and building-block chemicals. Specifically, the recalcitrance to modification and compositional variability of lignocellulose make it challenging to optimize and control the conditions under which the conversion takes place. Various characterization protocols have been developed over the past 150 years to elucidate the structural properties and compositional patterns that affect the processing of lignocellulose. Early characterization techniques were developed to estimate the relative digestibility and nutritional value of plant material after ingestion by ruminants and humans alike (e.g. dietary fiber). Over the years, these empirical techniques have evolved into statistical approaches that give a broader and more informative analysis of lignocellulose for conversion processes, to the point where an entire compositional and structural analysis of lignocellulosic biomass can be completed in minutes, rather than weeks. The use of modern spectroscopy and chemometric techniques has shown promise as a rapid and cost effective alternative to traditional empirical techniques. This review serves as an overview of the compositional analysis techniques that have been developed for lignocellulosic biomass in an effort to highlight the motivation and migration towards rapid, accurate, and cost-effective data-driven chemometric methods. These rapid analysis techniques can potentially be used to optimize future biorefinery unit operations, where large quantities of lignocellulose are continually processed into products of high value.</p
Amphiphilic Block Copolymers as Stabilizers in Emulsion Polymerization: Effects of the Stabilizing Block Molecular Weight Dispersity on Stabilization Performance
Molecular weight dispersity is not
typically studied as a design
parameter of block copolymer stabilizers but is often assumed to impact
stabilization performance; low molecular weight dispersity is generally
assumed to be associated with best performance. This is the first
quantitative investigation of the effects of block copolymer molecular
weight dispersity with regards to stabilization performance in an
emulsion polymerization. Poly(styrene)-<i>b</i>-poly(acrylic
acid) block copolymers were synthesized by nitroxide-mediated radical
polymerization and employed as stabilizers in the emulsion polymerization
of styrene. The effect of the stabilizing poly(acrylic acid) block
molecular weight dispersity on stabilization behavior was studied,
independent of molecular weight and composition. Block copolymer stabilizers
were evaluated in terms of critical aggregation concentration, dispersed
phase particle size, distribution, and zeta potential. The molecular
weight dispersity of the stabilizing block affected the aggregation
number and final number of particles but displayed no negative effects
on stability or size distribution
Amphiphilic Block Copolymers as Stabilizers in Emulsion Polymerization: Effects of the Anchoring Block Molecular Weight Dispersity on Stabilization Performance
Poly(sodium acrylate)-<i>b</i>-polystyrene block copolymers were employed as stabilizers in the
emulsion polymerization of styrene. Previous work by our group has
shown that the molecular weight dispersity of the stabilizing block
is an important design parameter of block copolymer stabilizers; herein,
the molecular weight dispersity of the anchoring polystyrene block, <i>Đ</i><sub>PS</sub>, was investigated. Stabilization performance
was evaluated by the critical aggregation concentration, aggregation
number, and surface activity of the block copolymers and the size,
distribution, and zeta potential of the polystyrene latex particles.
It was observed that <i>Đ</i><sub>PS</sub> had a strong
effect on aggregation number, which led to a change in the number
of latex particles in the seeded emulsion polymerization of styrene.
Surface activity decreased with increasing <i>Đ</i><sub>PS</sub> due to a greater diversity of copolymer compositions,
supporting the idea that copolymers of different composition play
different roles in the stabilization of an emulsion. The performance
of block copolymer stabilizers, evaluated by the stability and size
distribution of latex particles, was indistinguishable over the range
of <i>Đ</i><sub>PS</sub> studied; narrow stabilizer
molecular weight distributions were not necessary for satisfactory
performance