Recent advances and perspectives in the design and development of polymyxins

The rise of bacterial pathogens with acquired resistance to almost all available antibiotics is becoming a serious public health issue. Polymyxins, antibiotics that were mostly abandoned a few decades ago because of toxicity concerns, are ultimately considered as a last-line therapy to treat infections caused by multi-drug resistant Gram-negative bacteria. This review surveys the progress in understanding polymyxin structure, chemistry, mechanisms of antibacterial activity and nephrotoxicity, biomarkers, synergy and combination with other antimicrobial agents and antibiofilm properties. An update of recent efforts in the design and development of a new generation of polymyxin drugs is also discussed. A novel approach considering the modification of the scaffold of polymyxins to integrate metabolism and detoxification issues into the drug design process is a promising new line to potentially prevent accumulation in kidney and reduce nephrotoxicit

Extending the hydrophobic mismatch concept to amphiphilic membranolytic peptides

A series of nine amphiphilic, pore-forming α-helical KIA peptides (KIAGKIA repeats) with lengths between 14 and 28 residues were studied by solidstate 15N NMR to determine their alignment in oriented lipid bilayers. In a 2:1 mixture of 1,2-dimyristoyl-sn-glycero-3-phosphatidylcholine (DMPC) with its corresponding 1- myristoyl-2-hydroxy-sn-glycero-3-phosphocholine (lyso-MPC), which has a highly positive spontaneous curvature, the helix tilt angle was found to vary steadily with peptide length. The shortest peptide was aligned transmembrane and upright, while the longer ones successively became tilted away from the membrane normal. This behavior is in agreement with the hydrophobic matching concept, conceived so far only for hydrophobic helices. In 1,2-dioleoyl-sn-glycero-3-phosphatidylcholine, with a negative spontaneous curvature, all KIA peptides remained flat on the bilayer surface, while the cylindrical DMPC lipids permitted a slight tilt. Peptide insertion thus depends critically on the intrinsic lipid curvature, and helix orientation is then fine-tuned by membrane thickness. A refined toroidal pore model is proposed

Unveiling the Membrane and Cell Wall Action of Antimicrobial Cyclic Lipopeptides: Modulation of the Spectrum of Activity

Antibiotic resistance is a major public health challenge, and Gram-negative multidrug-resistant bacteria are particularly dangerous. The threat of running out of active molecules is accelerated by the extensive use of antibiotics in the context of the COVID-19 pandemic, and new antibiotics are urgently needed. Colistin and polymyxin B are natural antibiotics considered as last resort drugs for multi-resistant infections, but their use is limited because of neuro- and nephrotoxicity. We previously reported a series of synthetic analogues inspired in natural polymyxins with a flexible scaffold that allows multiple modifications to improve activity and reduce toxicity. In this work, we focus on modifications in the hydrophobic domains, describing analogues that broaden or narrow the spectrum of activity including both Gram-positive and Gram-negative bacteria, with MICs in the low µM range and low hemolytic activity. Using biophysical methods, we explore the interaction of the new molecules with model membranes that mimic the bacterial inner and outer membranes, finding a selective effect on anionic membranes and a mechanism of action based on the alteration of membrane function. Transmission electron microscopy observation confirms that polymyxin analogues kill microbial cells primarily by damaging membrane integrity. Redistribution of the hydrophobicity within the polymyxin molecule seems a plausible approach for the design and development of safer and more selective antibiotics

The Biomolecules Journal Club: Highlights on Recent Papers 1

We are glad to share with you our first Journal Club and to highlight some of the most interesting papers published recently. We hope we will tease your curiosity and encourage you to read full papers outside of your research area, which you may not have read otherwise. The Biomolecules Scientific Board wishes you an exciting read

Membrane association and contact formation by a synthetic analogue of polymyxin B and its fluorescent derivatives

sP-B is a synthetic analogue of the natural lipopeptide antibiotic polymyxin B (PxB) that maintains the ability of the parent compound to form vesicle-vesicle contacts and induce lipid exchange. Exchange is selective, and only monoanionic phospholipids such as 1-palmitoyl-2-oleoyl-glycero-sn-3-phosphoglycerol (POPG) are transferred, whereas dianionic phospholipids such as 1-palmitoyl-2-oleoyl-glycero-sn-3-phosphate (POPA) are not, as shown by fluorescence experiments based on the excimer/monomer ratio of pyrene-labeled phospholipids. Synthetic fluorescent analogues of sP-B are used to investigate the peptide position and orientation in the intermembrane contacts: sP-Bw, an analogue that contains D-tryptophan (D-Trp) instead of the naturally occurring D-phenylalanine, and sP-Bpy, incorporating a pyrene group at the N-terminus. Tryptophan fluorescence, anisotropy, and quenching measurements performed with sP-Bw indicate that the peptide binds and inserts in anionic vesicles of POPG and POPA. However, significant differences are seen depending on the lipid composition, as also demonstrated by fluorescence resonance energy transfer (FRET) experiments from Trp to 7-nitro-2-1,3-benzoxadiazol (NBD) groups at the interface. Intermolecular FRET using sP-Bw as the donor and sP-Bpy as the acceptor indicates self-association of the peptide, possibly forming dimers, when bound to POPG vesicles at concentrations that induce the vesicle-vesicle contacts

Isolation and characterization of kurstakin and surfactin isoforms produced by Enterobacter cloacae C3 strain

In this work, the extraction, structural analysis, and identification as well as antimicrobial, anti‐adhesive, and antibiofilm activities of lipopeptides produced by Enterobacter cloacae C3 strain were studied. A combination of chromatographic and spectroscopic techniques offers opportunities for a better characterization of the biosurfactant structure. Thin layer chromatography (TLC) and HPLC for amino acid composition determination are used. Efficient spectroscopic techniques have been utilized for investigations on the biochemical structure of biosurfactants, such as Fourier transform infrared (FT‐IR) spectroscopy and mass spectrometry analysis. This is the first work describing the production of different isoforms belonging to kurstakin and surfactin families by E cloacae strain. Three kurstakin homologues differing by the fatty acid chain length from C10 to C12 were detected. The spectrum of lipopeptides belonging to surfactin family contains various isoforms differing by the fatty acid chain length as well as the amino acids at positions four and seven. Lipopeptide C3 extract exhibited important antibacterial activity against Gram‐positive and Gram‐negative bacteria, antifungal activity, and interesting anti‐adhesive and disruptive properties against biofilm formation by human pathogenic bacterial strains: Salmonella typhimurium, Klebsiella pneumoniae, Staphylococcus aureus, Bacillus cereus, and Candida albicans

Helix fraying and lipid-dependent structure of a short amphipathic membrane-bound peptide revealed by solid-state NMR

The amphipathic a-helical peptide KIA14 [(KIAGKIA)(2)-NH2] was studied in membranes using circular dichroism and solid-state NMR spectroscopy to obtain global as well as local structural information. By analyzing H-2 NMR data from 10 analogues of KIA14 that were selectively labeled with Ala-d(3), those positions that are properly folded into a helix could be determined within the membrane-bound peptide. The N-terminus was found to be unraveled, whereas positions 4-14 formed an ideal helix all the way to the C-terminus. The helicity did not change when Gly residues were replaced by Ala-d3 but was reduced when Ile was replaced, indicating that large hydrophobic residues are required for membrane binding and helix formation. The reduced helicity was strongly correlated with a decrease in peptide-induced leakage from lipid vesicles. The orientation of the short KIA14 peptide was assessed in several lipid systems and compared with that of the longer KIA21 sequence [(KIAGKIA)(3)-NH2]. In 1,2-dioleoylsn-glycero-3-phosphatidylcholine, both peptides are aligned flat on the membrane surface, whereas in 1,2-dimyristoyl-sn-glycero3-phosphatidylcholine (DMPC)/1-myristoy1-2-hydroxy-sn-glycero-3-phosphatidylcholine (lyso-MPC) both are inserted into the membrane in an upright orientation. These two types of lipid systems had been selected for their strongly negative and positive spontaneous curvature, respectively. We propose that in these cases, the peptide orientation is largely determined by the lipid properties. On the other hand, in plain DMPC and 1,2-dilauroyl-sn-glycero-3-phosphatidylcholine, which have only a slight positive curvature, a marked difference in orientation is evident: the short KIA14 lies almost flat on the membrane surface, whereas the longer KIA21 is more tilted. We thus propose that out of the lipid systems tested here, DMPC (with hardly any curvature) is the least biased,lipid system in which peptide orientation and realignment can be studied, allowing to compare and discriminate the intrinsic effects of the properties of the peptides as such

Hydrophobic mismatch demonstrated for membranolytic peptides and their use as molecular rulers to measure bilayer thickness in native cells

Hydrophobic mismatch is a well-recognized principle in the interaction of transmembrane proteins with lipid bilayers. This concept was extended here to amphipathic membranolytic α-helices. Nine peptides with lengths between 14 and 28 amino acids were designed from repeated KIAGKIA motifs, and their helical nature was confirmed by circular dichroism spectroscopy. Biological assays for antimicrobial activity and hemolysis, as well as fluorescence vesicle leakage and solid-state NMR spectroscopy, were used to correlate peptide length with membranolytic activity. These data show that the formation of transmembrane pores is only possible under the condition of hydrophobic matching: the peptides have to be long enough to span the hydrophobic bilayer core to be able to induce vesicle leakage, kill bacteria, and cause hemolysis. By correlating the threshold lengths for biological activity with the biophysical results on model vesicles, the peptides could be utilized as molecular rulers to measure the membrane thickness in different cells

An overview of antimicrobial peptides and the latest advances in their development

INTRODUCTION: The recent dramatic increase in the incidence of antimicrobial resistance has been recognized by organizations such as the United Nations and World Health Organization as well as the governments of the USA and several European countries. A relatively new weapon in the fight against severe infections caused by multi-drug resistant bacteria is antimicrobial peptides (AMPs). These include colistin, currently regarded as the last line of antimicrobial therapy against multi-drug resistant microorganisms. Areas covered: Here, the authors provide an overview of the current research on AMPs. The focus is AMPs currently being developed for the treatment of recalcitrant bacterial infections, the synergies of AMPs and antibiotics, and the activity of AMPs against biofilm. This review also includes a brief introduction into the use of AMPs in infections caused by Mycobacterium, fungi, and parasites. Expert opinion: In research into new antimicrobials, AMPs are gaining increasing attention. While many are natural and are produced by a wide variety of organisms, others are being newly designed and chemically synthesized in the laboratory to achieve novel antimicrobial agents. The same strategy to fight infections in nature is thus being effectively exploited to safeguard human and animal health

Structural characterization and identification of cyclic lipopeptides produced by Bacillus methylotrophicus DCS1 strain

Bacillus methylotrophicus DCS1 strain was isolated from diesel contaminated soil and screened for its ability to produce biosurfactants; it was found effective for the production of surface active molecules. The structural characterization of the isolated lipopeptides was studied by a variety of analytical techniques. The organic extract of DCS1 'lipopeptides was fractionated by silica gel column chromatography (60 Mesh). Fractions containing lipopeptides were collected and identified by tandem mass spectrometry MALDI-TOF-MS and MALDI-TOF MS2. The crude biosurfactants contains a mixture of homologous lipopeptides with molecular weights between 1016 and 1556 Da. Mass spectrometry analysis of partially purified lipopeptides revealed that it contains different isoforms belonging to three families: surfactin, iturin and fengycin. To identify lipopeptides isoforms, MALDI-TOF MS2 was used and ions representing characteristic fragmentations were detected. The mass spectrometry characterization revealed the presence of four variants of surfactin lipopeptides, four variants of pumilacidin that differ according to the-beta-hydroxy fatty acid chain length as well as the type of amino acid at position 7, five variants of iturin A/mycosubtilin varying in the beta-amino fatty acid chain length from C12 to C16, C16 iturin Cl, five isoforms of bacillomycin D varying in the beta-amino fatty acid chain length from C14 to C18, and six fengycin isoforms that differ according to the length of the beta-hydroxy fatty acid side chain as well as the amino acid at position 6. The capacity of B. methylotrohicus DCS1 strain to produce many lipopeptides isoforms belonging to different families and having a structural diversity is a very interesting characteristic that allows them to be used in various fields of biotechnological applications