Design and optimization of electrochemical microreactors for continuous electrosynthesis

The study focuses on the design and construction, as well as the theoretical and experimental optimization of electrochemical filter press microreactors for the electrosynthesis of molecules with a high added value. The main characteristics of these devices are firstly a high-specific electrochemical area to increase conversion and selectivity, and secondly the shape and size of themicrochannels designed for a uniform residence time distribution of the fluid. A heat exchanger is integrated into the microstructured electrode to rapidly remove (or supply) the heat required in exo- or endothermic reactions. The microreactors designed are used to perform-specific electrosynthesis reactions such as thermodynamically unfavorable reactions (continuous NADH regeneration), or reactions with high enthalpy changes

Cartan subalgebras and the UCT problem, II

We show that outer approximately represenbtable actions of a finite cyclic group on UCT Kirchberg algebras satisfy a certain quasi-freeness type property if the corresponding crossed products satisfy the UCT and absorb a suitable UHF algebra tensorially. More concretely, we prove that for such an action there exists an inverse semigroup of homogeneous partial isometries that generates the ambient C*-algebra and whose idempotent semilattice generates a Cartan subalgebra. We prove a similar result for actions of finite cyclic groups with the Rokhlin property on UCT Kirchberg algebras absorbing a suitable UHF algebra. These results rely on a new construction of Cartan subalgebras in certain inductive limits of Cartan pairs. We also provide a characterisation of the UCT problem in terms of finite order automorphisms, Cartan subalgebras and inverse semigroups of partial isometries of the Cuntz algebra $\mathcal{O}_2$. This generalizes earlier work of the authors.Comment: minor revisions; final version, accepted for publication in Math. Ann.; 26 page

First Astronomical Use of Multiplexed Transition Edge Bolometers

We present performance results based on the first astronomical use of multiplexed superconducting bolometers. The Fabry-Perot Interferometer Bolometer Research Experiment (FIBRE) is a broadband submillimeter spectrometer that achieved first light in June 2001 at the Caltech Submillimeter Observatory (CSO). FIBRE'S detectors are superconducting transition edge sensor (TES) bolometers read out by a SQUID multiplexer. The Fabry-Perot uses a low resolution grating to order sort the incoming light. A linear bolometer array consisting of 16 elements detects this dispersed light, capturing 5 orders simultaneously from one position on the sky. With tuning of the Fabry-Perot over one free spectral range, a spectrum covering Δλ/λ= 1/7 at a resolution of δλ/λ ≈ 1/1200 can be acquired. This spectral resolution is sufficient to resolve Doppler-broadened line emission from external galaxies. FIBRE operates in the 350 µm and 450 µm bands. These bands cover line emission from the important star formation tracers neutral carbon [Cl] and carbon monoxide (CO). We have verified that the multiplexed bolometers are photon noise limited even with the low power present in moderate resolution spectrometry

Characterization of different DLC and DLN electrodes for biosensor design

International audienceDiamond-Like Carbon and Carbon-Like Nanocomposite electrodes, novel materials in the field of biosensors, made with different ratio of sp3/sp2 carbon hybridization or doped with elements such as Ni, Si and W, were characterized electrochemically by cyclic voltammetry and by amperometric measurements towards hydrogen peroxide. SiCAr1 and SiCNi5% were chosen as sensitive transducers for elaboration of amperometric glucose biosensors. Immobilization of glucose oxidase was carried out by cross-linking with glutareldehyde. Measurements were made at a fixed potential + 1.0 V in 40 mM phosphate buffer pH 7.4. SiCAr1 seems to be more sensitive for glucose (0.6875 µA/mM) then SiCNi5% (0.3654 µA/mM). Detections limits were respectively 20 µM and 30 µM. Michaelis-Menten constants for the two electrodes were found around 3 mM. 48% and 79% of the original response for 0.5 mM glucose remained respectively for both electrodes after 10 days

Regional versus remote atmosphere‐ocean drivers of the rapid projected intensification of the East Australian Current

Like many western boundary currents, the East Australian Current extension is projected to get stronger and warmer in the future. The CMIP5 multi‐model mean (MMM) projection suggests up to 5°C of warming under an RCP85 scenario by 2100. Previous studies employed Sverdrup balance to associate a trend in basin wide zonally integrated wind stress curl (resulting from the multi‐decadal poleward intensification in the westerly winds over the Southern Ocean) with enhanced transport in the EAC extension. Possible regional drivers are yet to be considered. Here, we introduce the NEMO‐OASIS‐WRF coupled regional climate model as a framework to improve our understanding of CMIP5 projections. We analyse a hierarchy of simulations in which the regional atmosphere and ocean circulations are allowed to freely evolve subject to boundary conditions that represent present day and CMIP5 RCP8.5 climate change anomalies. Evaluation of the historical simulation shows an EAC extension that is stronger than similar ocean‐only models and observations. This bias is not explained by a linear response to differences in wind stress. The climate change simulations show that regional atmospheric CMIP5 MMM anomalies drive 73% of the projected 12 Sv increase in EAC extension transport whereas the remote ocean boundary conditions and regional radiative forcing (greenhouse gases within the domain) play a smaller role. The importance of regional changes in wind stress curl in driving the enhanced EAC extension is consistent with linear theory where the NEMO‐OASIS‐WRF response is closer to linear transport estimates compared to the CMIP5 MMM

Primordial Black Hole Formation during First-Order Phase Transitions

Primordial black holes (PBHs) may form in the early universe when pre-existing adiabatic density fluctuations enter into the cosmological horizon and recollapse. It has been suggested that PBH formation may be facilitated when fluctuations enter into the horizon during a strongly first-order phase transition which proceeds in approximate equilibrium. We employ general-relativistic hydrodynamics numerical simulations in order to follow the collapse of density fluctuations during first-order phase transitions. We find that during late stages of the collapse fluctuations separate into two regimes, an inner part existing exclusively in the high-energy density phase with energy density $\epsilon_{\rm h}$, surrounded by an outer part which exists exclusively in the low-energy density phase with energy density $\epsilon_{\rm h}-L$, where $L$ is the latent heat of the transition. We confirm that the fluctuation density threshold $\delta\epsilon /\epsilon$ required for the formation of PBHs during first-order transitions decreases with increasing $L$ and falls below that for PBH formation during ordinary radiation dominated epochs. Our results imply that, in case PBHs form at all in the early universe, their mass spectrum is likely dominated by the approximate horizon masses during epochs when the universe undergoes phase transitions.Comment: 8 pages, 4 figures, revtex style, submitted to PR

Probing Red Giant Atmospheres with Gravitational Microlensing

Gravitational microlensing provides a new technique for studying the surfaces of distant stars. Microlensing events are detected in real time and can be followed up with precision photometry and spectroscopy. This method is particularly adequate for studying red giants in the Galactic bulge. Recently we developed an efficient method capable of computing the lensing effect for thousands of frequencies in a high-resolution stellar spectrum. Here we demonstrate the effects of microlensing on synthesized optical spectra of red giant model atmospheres. We show that different properties of the stellar surface can be recovered from time-dependent photometry and spectroscopy of a point-mass microlensing event with a small impact parameter. In this study we concentrate on center-to-limb variation of spectral features. Measuring such variations can reveal the depth structure of the atmosphere of the source star.Comment: 23 pages with 11 Postscript figures, submitted to ApJ; Section 2 expanded, references added, text revise

The MACHO Project: Microlensing Results from 5.7 Years of LMC Observations

We report on our search for microlensing towards the Large Magellanic Cloud (LMC). Analysis of 5.7 years of photometry on 11.9 million stars in the LMC reveals 13 - 17 microlensing events. This is significantly more than the $\sim$ 2 to 4 events expected from lensing by known stellar populations. The timescales (\that) of the events range from 34 to 230 days. We estimate the microlensing optical depth towards the LMC from events with 2 < \that < 400 days to be 1.2 ^{+0.4}_ {-0.3} \ten{-7}$, with an additional 20systematic error. The spatial distribution of events is mildly inconsistent with LMC/LMC disk self-lensing, but is consistent with an extended lens distribution such as a Milky Way or LMC halo. Interpreted in the context of a Galactic dark matter halo, consisting partially of compact objects, a maximum likelihood analysis gives a MACHO halo fraction of 20with a 95the 95Galactic halo population, the most likely MACHO mass is between$ 0.15 \msun$and$ 0.9 \msun$, depending on the halo model, and the total mass in MACHOs out to 50 kpc is found to be 9+4-3 10^{10} msun, independent of the halo model. These results are marginally consistent with our previous results, but are lower by about a factor of two. Besides a larger data set, this work also includes an improved efficiency determination, improved likelihood analysis, and more thorough testing of systematic errors, especially with respect to the treatment of potential backgrounds to microlensing, such as supernovae in galaxies behind the LMC. [Abridged]Comment: 53 pages, Latex with 12 postscript figures, submitted to Ap

Discovery and Characterization of a Caustic Crossing Microlensing Event in the SMC

We present photometric observations and analysis of the second microlensing event detected towards the Small Magellanic Cloud (SMC), MACHO Alert 98-SMC-1. This event was detected early enough to allow intensive observation of the lightcurve. These observations revealed 98-SMC-1 to be the first caustic crossing, binary microlensing event towards the Magellanic Clouds to be discovered in progress. Frequent coverage of the evolving lightcurve allowed an accurate prediction for the date of the source crossing out of the lens caustic structure. The caustic crossing temporal width, along with the angular size of the source star, measures the proper motion of the lens with respect to the source, and thus allows an estimate of the location of the lens. Lenses located in the Galactic halo would have a velocity projected to the SMC of v^hat ~1500 km/s, while an SMC lens would typically have v^hat ~60 km/s. We have performed a joint fit to the MACHO/GMAN data presented here, including recent EROS data of this event. These joint data are sufficient to constrain the time for the lens to move an angle equal to the source angular radius; 0.116 +/- 0.010 days. We estimate a radius for the lensed source of 1.4 +/- 0.1 R_sun. This yields a projected velocity of v^hat = 84 +/- 9 km/s. Only 0.15% of halo lenses would be expected to have a v^hat value at least as small as this, while 31% of SMC lenses would be expected to have v^hat as large as this. This implies that the lensing system is more likely to reside in the SMC than in the Galactic halo.Comment: 16 pages, including 3 tables and 3 figures; submitted to The Astrophysical Journa