1,412 research outputs found
Optimum Functions for Radial Wires of Monopole Antennas with Arbitrary Elevation Angles
Monopole antennas on the earth usually use ground screen with simple radial wires to improve their radiation performance. The number of radials,N, is usually considered a constant in the screen. This paper studies the effect of changing N and considering it as a function of distance, ρ, from the monopole using a simple and yet a fast method. The function N(ρ) is optimized for different beam angles of an HF monopoleantenna. The theoretical functions are converted to practical functions to be formed using meandered lines. Practicable calculated results are validated bymethod of moments. Furthermore it is shown that for low angle radiation aconstant N(ρ) with optimized radius of the ground screen is the best choice. The results can be used for higher frequencies, i.e. VHF and UHF frequency bands as well
Evaluation of the Effects of a Plasma Activated Medium on Cancer Cells
The interaction of low temperature plasma with liquids is a relevant topic of study to the field of plasma medicine. This is because cells and tissues are normally surrounded or covered by biological fluids. Therefore, the chemistry induced by the plasma in the aqueous state becomes crucial and usually dictates the biological outcomes. This process became even more important after the discovery that plasma activated media can be useful in killing various cancer cell lines. Here, we report on the measurements of concentrations of hydrogen peroxide, a species known to have strong biological effects, produced by application of plasma to a minimum essential culture medium. The activated medium is then used to treat SCaBER cancer cells. Results indicate that the plasma activated medium can kill the cancer cells in a dose dependent manner, retain its killing effect for several hours, and is as effective as apoptosis inducing drugs
Upregulation of PD-L1 expression in breast cancer cells through the formation of 3D multicellular cancer aggregates under different chemical and mechanical conditions
© 2019 Elsevier B.V. Expression of programmed death-ligand 1 (PD-L1) in cancer cells plays an important role in cancer-immune cell interaction. The emerging evidence suggests regulation of PD-L1 expression by several tumor microenvironmental cues. However, the association of PD-L1 expression with chemical and mechanical features of the tumor microenvironment, specifically epidermal growth factor receptor (EGFR) signaling and matrix stiffness, remains elusive. Herein, we determine whether EGFR targeting and substrate stiffness affect the regulation of PD-L1 expression. Breast carcinoma cell lines, MCF7 and MDA-MB-231, were cultured under different conditions targeting EGFR and exposing cells to distinct substrate stiffness to evaluate PD-L1 expression. Furthermore, the ability to form aggregates in short-term culture of breast carcinoma cells and its effect on expression level of PD-L1 was probed. Our results indicated that PD-L1 expression was altered in response to both EGFR inhibition and substrate stiffness. Additionally, a positive association between the formation of multicellular aggregates and PD-L1 expression was observed. MDA-MB-231 cells expressed the highest PD-L1 level on a stiff substrate, while inhibition of EGFR reduced expression of PD-L1. The results suggested that both physical and chemical features of tumor microenvironment regulate PD-L1 expression through alteration of tumor aggregate formation potential. In line with these results, the in-silico study highlighted a positive correlation between PD-L1 expression, EGFR signaling, epithelial to mesenchymal transition related transcription factors (EMT-TFs) and stemness markers in metastatic breast cancer. These findings improve our understanding of regulation of PD-L1 expression by tumor microenvironment leading to evasion of tumor cells from the immune system
The spatial and compositional evolution of the Jurassic Ghorveh-Dehgolan plutons of the Zagros Orogen, Iran: SHRIMP zircon U-Pb and Sr and Nd isotope evidence
The Ghorveh-Dehgolan plutons of the northern Sanandaj-Sirjan Zone, Zagros Orogen, comprise seven composite intrusive bodies that were generated during northeastward subduction of Neotethys beneath the Iranian sector of the Eurasian plate. Zircon U-Pb SHRIMP dating reveals that the magmatic activity spanned from ~160 to ~140Ma. It started with intrusion of arc-related calc-alkaline mafic to intermediate rocks closely followed by felsic I-type granitoids. This magmatism was post-dated by felsic alkaline A-type granites. In addition to compositional changes over time, the plutons forming the arc young towards the southwest: the north Ghorveh batholith (161±4Ma) and Shanevareh (160±2Ma); Qalaylan (159±3Ma); then central Ghorveh, Galali and Saranjianeh (151±0.2Ma to 148±1Ma); and, lastly, the south Ghorveh batholith (147±3Ma) and Bolbanabad-Havarpan (144±1Ma). Whatever the process driving the changes, be it arc- or ridge-collision with the subducting system, slab roll-back, slab breakoff, subduction initiation transference, etc., the progression from I-type to A-type magmatism appears to mark a significant change from a collisional to an extensional setting in the region in the Late Jurassic. Geochemical and isotopic characteristics of the Ghorveh-Dehgolan plutons indicate that Arabian-Nubian-like crust was an important component of the magmatic sources
MIMO free-space optical communication employing subcarrier intensity modulation in atmospheric turbulence channels
In this paper, we analyse the error performance of transmitter/receiver array free-space optical (FSO) communication system employing binary phase shift keying (BPSK) subcarrier intensity modulation (SIM) in clear but turbulent atmospheric channel. Subcarrier modulation is employed to eliminate the need for adaptive threshold detector. Direct detection is employed at the receiver and each subcarrier is subsequently demodulated coherently. The effect of irradiance fading is mitigated with an array of lasers and photodetectors. The received signals are linearly combined using the optimal maximum ratio combining (MRC), the equal gain combining (EGC) and the selection combining (SelC). The bit error rate (BER) equations are derived considering additive white Gaussian noise and log normal intensity fluctuations. This work is part of the EU COST actions and EU projects
Numerical and Experimental Study of Cross-Sectional Effects on the Mixing Performance of the Spiral Microfluidics.
Mixing at the microscale is of great importance for various applications ranging from biological and chemical synthesis to drug delivery. Among the numerous types of micromixers that have been developed, planar passive spiral micromixers have gained considerable interest due to their ease of fabrication and integration into complex miniaturized systems. However, less attention has been paid to non-planar spiral micromixers with various cross-sections and the effects of these cross-sections on the total performance of the micromixer. Here, mixing performance in a spiral micromixer with different channel cross-sections is evaluated experimentally and numerically in the Re range of 0.001 to 50. The accuracy of the 3D-finite element model was first verified at different flow rates by tracking the mixing index across the loops, which were directly proportional to the spiral radius and were hence also proportional to the Dean flow. It is shown that higher flow rates induce stronger vortices compared to lower flow rates; thus, fewer loops are required for efficient mixing. The numerical study revealed that a large-angle outward trapezoidal cross-section provides the highest mixing performance, reaching efficiencies of up to 95%. Moreover, the velocity/vorticity along the channel length was analyzed and discussed to evaluate channel mixing performance. A relatively low pressure drop (<130 kPa) makes these passive spiral micromixers ideal candidates for various lab-on-chip applications
Fabrication of unconventional inertial microfluidic channels using wax 3D printing.
Inertial microfluidics has emerged over the past decade as a powerful tool to accurately control cells and microparticles for diverse biological and medical applications. Many approaches have been proposed to date in order to increase the efficiency and accuracy of inertial microfluidic systems. However, the effects of channel cross-section and solution properties (Newtonian or non-Newtonian) have not been fully explored, primarily due to limitations in current microfabrication methods. In this study, we overcome many of these limitations using wax 3D printing technology and soft lithography through a novel workflow, which eliminates the need for the use of silicon lithography and polydimethylsiloxane (PDMS) bonding. We have shown that by adding dummy structures to reinforce the main channels, optimizing the gap between the dummy and main structures, and dissolving the support wax on a PDMS slab to minimize the additional handling steps, one can make various non-conventional microchannels. These substantially improve upon previous wax printed microfluidic devices where the working area falls into the realm of macrofluidics rather than microfluidics. Results revealed a surface roughness of 1.75 μm for the printed channels, which does not affect the performance of inertial microfluidic devices used in this study. Channels with complex cross-sections were fabricated and then analyzed to investigate the effects of viscoelasticity and superposition on the lateral migration of the particles. Finally, as a proof of concept, microcarriers were separated from human mesenchymal stem cells using an optimized channel with maximum cell-holding capacity, demonstrating the suitability of these microchannels in the bioprocessing industry
Characterizing heralded single-photon sources with imperfect measurement devices
Any characterization of a single-photon source is not complete without
specifying its second-order degree of coherence, i.e., its function.
An accurate measurement of such coherence functions commonly requires
high-precision single-photon detectors, in whose absence, only time-averaged
measurements are possible. It is not clear, however, how the resulting
time-averaged quantities can be used to properly characterize the source. In
this paper, we investigate this issue for a heralded source of single photons
that relies on continuous-wave parametric down-conversion. By accounting for
major shortcomings of the source and the detectors--i.e., the multiple-photon
emissions of the source, the time resolution of photodetectors, and our chosen
width of coincidence window--our theory enables us to infer the true source
properties from imperfect measurements. Our theoretical results are
corroborated by an experimental demonstration using a PPKTP crystal pumped by a
blue laser, that results in a single-photon generation rate about 1.2 millions
per second per milliwatt of pump power. This work takes an important step
toward the standardization of such heralded single-photon sources.Comment: 18 pages, 9 figures; corrected Eq. (11) and the description follows
Eq. (22
- …