1,487 research outputs found

    Neoclassical tearing modes in DIII-D and calculations of the stabilizing effects of localized electron cyclotron current drive

    Full text link
    Neoclassical tearing modes are found to limit the achievable beta in many high performance discharges in DIII-D. Electron cyclotron current drive within the magnetic islands formed as the tearing mode grows has been proposed as a means of stabilizing these modes or reducing their amplitude, thereby increasing the beta limit by a factor around 1.5. Some experimental success has been obtained previously on Asdex-U. Here the authors examine the parameter range in DIII-C in which this effect can best be studied

    High-temperature weak ferromagnetism on the verge of a metallic state: Impact of dilute Sr-doping on BaIrO3

    Full text link
    The 5d-electron based BaIrO3 is a nonmetallic weak ferromagnet with a Curie temperature at Tc=175 K. Its largely extended orbitals generate strong electron-lattice coupling, and magnetism and electronic structure are thus critically linked to the lattice degree of freedom. Here we report results of our transport and magnetic study on slightly Sr doped BaIrO3. It is found that dilute Sr-doping drastically suppresses Tc, and instantaneously leads to a nonmetal-metal transition at high temperatures. All results highlight the instability of the ground state and the subtle relation between magnetic ordering and electron mobility. It is clear that BaIrO3 along with very few other systems represents a class of materials where the magnetic and transport properties can effectively be tuned by slight alterations in lattice parameters

    Analysis of survival data with cure fraction and variable selection: A pseudo-observations approach

    Get PDF
    In biomedical studies, survival data with a cure fraction (the proportion of subjects cured of disease) are commonly encountered. The mixture cure and bounded cumulative hazard models are two main types of cure fraction models when analyzing survival data with long-term survivors. In this article, in the framework of the Cox proportional hazards mixture cure model and bounded cumulative hazard model, we propose several estimators utilizing pseudo-observations to assess the effects of covariates on the cure rate and the risk of having the event of interest for survival data with a cure fraction. A variable selection procedure is also presented based on the pseudo-observations using penalized generalized estimating equations for proportional hazards mixture cure and bounded cumulative hazard models. Extensive simulation studies are conducted to examine the proposed methods. The proposed technique is demonstrated through applications to a melanoma study and a dental data set with high-dimensional covariates

    Beam Dynamics Study in a Dual Energy Storage Ring for Ion Beam Cooling*

    Get PDF
    A dual energy storage ring designed for beam cooling consists of two closed rings with significantly different energies: the cooling and damping rings. These two rings are connected by an energy recovering superconducting RF structure that provides the necessary energy difference. In our design, the RF acceleration has a main linac and harmonic cavities both running at crest that at first accelerates the beam from low energy E_{L} to high energy E_{H} and then decelerates the beam from E_{H} to E_{L} in the next pass. The purpose of the harmonic cavities is to extend the bunch length in a dual energy storage ring as such a longer bunch length may be very useful in a cooling application. Besides these cavities, a bunching cavity running on zero-crossing phase is used outside of the common beamline to provide the necessary longitudinal focusing for the system. In this paper, we present a preliminary lattice design along with the fundamental beam dynamics study in such a dual energy storage ring

    Radiative Corrections to One-Photon Decays of Hydrogenic Ions

    Full text link
    Radiative corrections to the decay rate of n=2 states of hydrogenic ions are calculated. The transitions considered are the M1 decay of the 2s state to the ground state and the E1(M2) decays of the 2p1/22p_{1/2} and 2p3/22p_{3/2} states to the ground state. The radiative corrections start in order α(Zα)2\alpha (Z \alpha)^2, but the method used sums all orders of ZαZ\alpha. The leading α(Zα)2\alpha (Z\alpha)^2 correction for the E1 decays is calculated and compared with the exact result. The extension of the calculational method to parity nonconserving transitions in neutral atoms is discussed.Comment: 22 pages, 2 figure

    Measurements of Magnetic Field Penetration in Superconducting Materials for SRF Cavities

    Get PDF
    Superconducting radiofrequency (SRF) cavities used in particle accelerators operate in the Meissner state. To achieve high accelerating gradients, the cavity material should stay in the Meissner state under high RF magnetic field without penetration of vortices through the cavity wall. The field onset of flux penetration into a superconductor is an important parameter of merit of alternative superconducting materials other than Nb which can enhance the performance of SRF cavities. There is a need for a simple and efficient technique to measure the onset of field penetration into a superconductor directly. We have developed a Hall probe experimental setup for the measurement of the flux penetration field through a superconducting sample placed under a small superconducting solenoid magnet which can generate magnetic fields up to 500 mT. The system has been calibrated and used to measure different bulk and thin film superconducting materials. This system can also be used to study SIS multilayer coatings that have been proposed to enhance the vortex penetration field in Nb cavities

    Evaluation of Anisotropic Magnetoresistive (AMR) Sensors for a Magnetic Field Scanning System for SRF Cavities

    Get PDF
    One of the significant causes of residual losses in superconducting radio-frequency (SRF) cavities is trapped magnetic flux. The flux trapping mechanism depends on many factors that include cool-down conditions, surface preparation techniques, and ambient magnetic field orientation. Suitable diagnostic tools are not yet available to quantitatively correlate such factors’ effect on the flux trapping mechanism. A magnetic field scanning system (MFSS) consisting of AMR sensors, fluxgate magnetometers, or Hall probes is recently commissioned to scan the local magnetic field of trapped vortices around 1.3 GHz single-cell SRF cavities. In this contribution, we will present results from sensitivity calibration and the first tests of AMR sensors in the MFSS

    Estimates of Damped Equilibrium Energy Spread and Emittance in a Dual Energy Storage Ring

    Get PDF
    A dual energy storage ring design consists of two loops at markedly different energies. As in a single-energy storage ring, the linear optics in the ring design may be used to determine the damped equilibrium emittance and energy spread. Because the individual radiation events in the two rings are different and independent, we can provide analytical estimates of the damping times in a dual energy storage ring. Using the damping times, the values of damped energy spread, and emittance can be determined for a range of parameters related to lattice design and rings energies. We present analytical calculations along with simulation results to estimate the values of damped energy spread and emittance in a dual energy storage ring. We note that the damping time tends to be dominated by the damping time of the high energy ring in cases where the energy of the high energy rings is significantly greater than that of the low energy ring
    • …
    corecore