18,553 research outputs found
Space Station Spartan study
The required extension, enhancement, and upgrading of the present Spartan concept are described to conduct operations from the space station using the station's unique facilities and operational features. The space station Spartan (3S), the free flyer will be deployed from and returned to the space station and will conduct scientific missions of much longer duration than possible with the current Spartan. The potential benefits of a space station Spartan are enumerated. The objectives of the study are: (1) to develop a credible concept for a space station Spartan; and (2) to determine the associated requirements and interfaces with the space station to help ensure that the 3S can be properly accommodated
Stability, reliability and cross-mode correlations of tests in a recommended 8-minute performance assessment battery
A need exists for an automated performance test system to study drugs, agents, treatments, and stresses of interest to the aviation, space, and environmental medical community. The purpose of this present study is to evaluate tests for inclusion in the NASA-sponsored Automated Performance Test System (APTS). Twenty-one subjects were tested over 10 replications with tests previously identified as good candidates for repeated-measure research. The tests were concurrently administered in paper-and-pencil and microcomputer modes. Performance scores for the two modes were compared. Data from trials 1 to 10 were examined for indications of test stability and reliability. Nine of the ten APT system tests achieved stability. Reliabilities were generally high. Cross-correlation of microbased tests with traditional paper-and-pencil versions revealed similarity of content within tests in the different modes, and implied at least three cognition and two motor factors. This protable, inexpensive, rugged, computerized battery of tests is recommended for use in repeated-measures studies of environmental and drug effects on performance. Identification of other tests compatible with microcomputer testing and potentially capable of tapping previously unidentified factors is recommended. Documentation of APTS sensitivity to environmental agents is available for more than a dozen facilities and is reported briefly. Continuation of such validation remains critical in establishing the efficacy of APTS tests
An alternate method for achieving temperature control in the -130 C to 75 C range
Thermal vacuum testing often requires temperature control of chamber shrouds and heat exchangers within the -130 C to 75 C range. There are two conventional methods which are normally employed to achieve control through this intermediate temperature range: (1) single-pass flow where control is achieved by alternately pulsing hot gaseous nitrogen (GN2) and cold LN2 into the feed line to yield the setpoint temperature; and (2) closed-loop circulation where control is achieved by either electrically heating or LN2 cooling the circulating GN2 to yield the setpoint temperature. A third method, using a mass flow ratio controller along with modulating control valves on GN2 and LN2 lines, provides excellent control but equipment for this method is expensive and cost-prohibitive for all but long-term continuous processes. The single-pass method provides marginal control and can result in unexpected overcooling of the test article from even a short pulse of LN2. The closed-loop circulation method provides excellent control but requires an expensive blower capable of operating at elevated pressures and cryogenic temperatures. Where precise control is needed (plus or minus 2 C), single-pass flow systems typically have not provided the precision required, primarily because of overcooling temperature excursions. Where several individual circuits are to be controlled at different temperatures, the use of expensive cryogenic blowers for each circuit is also cost-prohibitive, especially for short duration of one-of-a-kind tests. At JPL, a variant of the single-pass method was developed that was shown to provide precise temperature control in the -130 C to 75 C range while exhibiting minimal setpoint overshoot during temperature transitions. This alternate method uses a commercially available temperature controller along with a GN2/LN2 mixer to dampen the amplitude of cold temperature spikes caused by LN2 pulsing. The design of the GN2/LN2 mixer, the overall control system configuration, the operational procedure, and the prototype system test results are described
Trends in systolic blood pressure in the thousand aviator cohort over a 24-year period
Age, weight, and parental longevity effects on trends in systolic blood pressure in thousand aviator cohort over 24 year perio
Thermal and Non-thermal Plasmas in the Galaxy Cluster 3C 129
We describe new Chandra spectroscopy data of the cluster which harbors the
prototypical "head tail" radio galaxy 3C 129 and the weaker radio galaxy 3C
129.1. We combined the Chandra data with Very Large Array (VLA) radio data
taken at 0.33, 5, and 8 GHz (archival data) and 1.4 GHz (new data). We also
obtained new HI observations at the Dominion Radio Astrophysical Observatory
(DRAO) to measure the neutral Hydrogen column density in the direction of the
cluster with arcminute angular resolution. The Chandra observation reveals
extended X-ray emission from the radio galaxy 3C 129.1 with a total luminosity
of 1.5E+41 erg/s. The X-ray excess is resolved into an extended central source
of ~2 arcsec (1 kpc) diameter and several point sources with an individual
luminosity up to 2.1E+40 erg/s. In the case of the radio galaxy 3C 129, the
Chandra observation shows, in addition to core and jet X-ray emission reported
in an earlier paper, some evidence for extended, diffuse X-ray emission from a
region east of the radio core. The 12 arcsec x 36 arcsec (6 kpc x 17 kpc)
region lies "in front" of the radio core, in the same direction into which the
radio galaxy is moving. We use the radio and X-ray data to study in detail the
pressure balance between the non-thermal radio plasma and the thermal Intra
Cluster Medium (ICM) along the tail of 3C 129 which extends over 15 arcmin (427
kpc). Depending on the assumed lower energy cutoff of the electron energy
spectrum, the minimum pressure of the radio plasma lies a factor of between 10
and 40 below the ICM pressure for a large part of the tail. We discuss several
possibilities to explain the apparent pressure mismatch.Comment: Accepted for publication in MNRAS. Refereed manuscript. 14 pages, 8
figures, additional panel of Fig. 3 shows asymmetric ICM distributio
Initial Scientific Results from Phase-Referenced Astrometry of Sub-Arcsecond Binaries
The Palomar Testbed Interferometer has observed several binary star systems
whose separations fall between the interferometric coherence length (a few
hundredths of an arcsecond) and the typical atmospheric seeing limit of one
arcsecond. Using phase-referencing techniques we measure the relative
separations of the systems to precisions of a few tens of micro-arcseconds. We
present the first scientific results of these observations, including the
astrometric detection of the faint third stellar component of the kappa Pegasi
system.Comment: 8 pages, 5 figures. To appear in SPIE conference proceedings volume
5491, "New Frontiers in Stellar Interferometery
A new approach for performing contamination control bakeouts in JPL thermal vacuum test chambers
Contamination control requirements for the Wide Field/Planetary Camera II (WF/PC II) are necessarily stringent to protect against post-launch contamination of the sensitive optical surfaces, particularly the cold charge coupled device (CCD) imaging surfaces. Typically, thermal vacuum test chambers have employed a liquid nitrogen (LN2) cold trap to collect outgassed contaminants. This approach has the disadvantage of risking recontamination of the test article from shroud offgassing during post-test warmup of the chamber or from any shroud warming of even a few degrees during the bakeout process. By using an enclave, essentially a chamber within a chamber, configured concentrically and internally within an LN2 shroud, a method was developed, based on a design concept by Taylor, for preventing recontamination of test articles during bakeouts and subsequent post-test warmup of the vacuum chamber. Enclaves for testing WF/PC II components were designed and fabricated, then installed in three of JPL's Environmental Test Lab chambers. The design concepts, operating procedures, and test results of this development are discussed
Modeling meander morphodynamics over self-formed heterogeneous floodplains
This work addresses the signatures embedded in the planform geometry of meandering rivers consequent to the formation of floodplain heterogeneities as the river bends migrate. Two geomorphic features are specifically considered: scroll bars produced by lateral accretion of point bars at convex banks and oxbow lake fills consequent to neck cutoffs. The sedimentary architecture of these geomorphic units depends on the type and amount of sediment, and controls bank erodibility as the river impinges on them, favoring or contrasting the river migration. The geometry of numerically generated planforms obtained for different scenarios of floodplain heterogeneity is compared to that of natural meandering paths. Half meander metrics and spatial distribution of channel curvatures are used to disclose the complexity embedded in meandering geometry. Fourier Analysis, Principal Component Analysis, Singular Spectrum Analysis and Multivariate Singular Spectrum Analysis are used to emphasize the subtle but crucial differences which may emerge between apparently similar configurations. A closer similarity between observed and simulated planforms is attained when fully coupling flow and sediment dynamics (fully-coupled models) and when considering self-formed heterogeneities that are less erodible than the surrounding floodplain
- …