Use of MAGSAT anomaly data for crustal structure and mineral resources in the US midcontinent

Activities concerning the interpretation of processed MAGSAT data and maps are briefly reported. Work involving the identification of long wavelength 'regional' effects that might be associated with varying crustal thickness or Curie temperature depths is processing

Integrated airframe propulsion control

Perturbation equations which describe flight dynamics and engine operation about a given operating point are combined to form an integrated aircraft/propulsion system model. Included in the model are the dependence of aerodynamic coefficients upon atmospheric variables along with the dependence of engine variables upon flight condition and inlet performance. An off-design engine performance model is used to identify interaction parameters in the model. Inclusion of subsystem interaction effects introduces coupling between flight and propulsion variables. To analyze interaction effects on control, consideration is first given to control requirements for separate flight and engine models. For the separate airframe model, feedback control provides substantial improvement in short period damping. For the integrated system, feedback control compensates for the coupling present in the model and provides good overall system stability. However, this feedback control law involves many non-zero gains. Analysis of suboptimal control strategies indicates that performance of the closed loop integrated system can be maintained with a feedback matrix in which the number of non-zero gains is small relative to the number of components in the feedback matrix

Physical Activity and Mental Well-being in a Cohort Aged 60–64 Years

Introduction: Although evidence suggests physical activity (PA) may be associated with mental well-being at older ages, it is unclear whether some types of PA are more important than others. The purpose of this study is to investigate associations of monitored total PA under free-living conditions, self-reported leisure-time PA (LTPA), and walking for pleasure with mental well-being at age 60–64 years. Methods: Data on 930 (47%) men and 1,046 (53%) women from the United Kingdom MRC National Survey of Health and Development collected in 2006–2011 at age 60–64 were used in 2013–2014 to test the associations of PA (PA energy expenditure and time spent in different intensities of activity assessed using combined heart rate and acceleration monitors worn for 5 days, self-reported LTPA, and walking for pleasure) with the Warwick-Edinburgh Mental Well-being Scale (WEMWBS; range, 14–70). Results: In linear regression models adjusted for gender, long-term limiting illness, smoking, employment, socioeconomic position, personality, and prior PA, those who walked for >1 hour/week had mean WEMWBS scores 1.47 (95% CI=0.60, 2.34) points higher than those who reported no walking. Those who participated in LTPA at least five times/month had WEMWBS scores 1.25 (95% CI=0.34, 2.16) points higher than those who did not engage in LTPA. There were no statistically significant associations between free-living PA and WEMWBS scores. Conclusions: In adults aged 60–64 years, participation in self-selected activities such as LTPA and walking are positively related to mental well-being, whereas total levels of free-living PA are not

The Behaviour of Finely Ground Bottom Ash in Portland Cement

The aim of this project was to assess the effects of finely ground MSWI bottom ash in Portland cement. Mortar mixes were prepared with 10% and 40% replacement of cement by ground IBA and then tested with regards to their material composition and engineering behaviour. IBA was found not to be inert, but showed some degree of reactivity. Replacement of cement with IBA was found to have no detrimental effects at low concentrations. This was not the case for 40% replacement, where cement replacement greatly affected strength, creep and drying shrinkage

Aerodynamic design and performance testing of an advanced 30 deg swept, eight bladed propeller at Mach numbers from 0.2 to 0.85

The increased emphasis on fuel conservation in the world has stimulated a series of studies of both conventional and unconventional propulsion systems for commercial aircraft. Preliminary results from these studies indicate that a fuel saving of from 15 to 28 percent may be realized by the use of an advanced high speed turboprop. The turboprop must be capable of high efficiency at Mach 0.8 above 10.68 km (35,000 ft) altitude if it is to compete with turbofan powered commercial aircraft. An advanced turboprop concept was wind tunnel tested. The model included such concepts as an aerodynamically integrated propeller/nacelle, blade sweep and power (disk) loadings approximately three times higher than conventional propeller designs. The aerodynamic design for the model is discussed. Test results are presented which indicate propeller net efficiencies near 80 percent were obtained at high disk loadings at Mach 0.8

X-ray polarimetry with an active-matrix pixel proportional counter

We report the first results from an X-ray polarimeter with a micropattern gas proportional counter using an amorphous silicon active matrix readout. With 100% polarized X-rays at 4.5 keV, we obtain a modulation factor of 0.33 +/- 0.03, confirming previous reports of the high polarization sensitivity of a finely segmented pixel proportional counter. The detector described here has a geometry suitable for the focal plane of an astronomical X-ray telescope. Amorphous silicon readout technology will enable additional extensions and improvements.Comment: 4 pages, 4 figures, 1 tabl

Enhanced photothermal displacement spectroscopy for thin-film characterization using a Fabry-Perot resonator

We have developed a technique for photothermal displacement spectroscopy that is potentially orders of magnitude more sensitive than conventional methods. We use a single Fabry-Perot resonator to enhance both the intensity of the pump beam and the sensitivity of the probe beam. The result is an enhancement of the response of the instrument by a factor proportional to the square of the finesse of the cavity over conventional interferometric measurements. In this paper we present a description of the technique, and we discuss how the properties of thin films can be deduced from the photothermal response. As an example of the technique, we report a measurement of the thermal properties of a multilayer dielectric mirror similar to those used in interferometric gravitational wave detectors