28,627 research outputs found
Beryllium 7 and Lead 210 in the western hemisphere Arctic atmosphere: Observations from three recent aircraft-based sampling programs
Concentrations of the natural radionuclides 7Be and 210Pb were determined in aerosol samples collected in the western hemisphere Arctic during the recent NOAA Arctic Gas and Aerosol Sampling Program (AGASP 3) and NASA Global Tropospheric Experiment/Arctic Boundary Layer Expeditions (GTE/ABLE 3A and ABLE 3B) missions. Beryllium 7 showed a free tropospheric concentration maximum between 4 and 5 km in the summer of 1990. Previous 7Be data obtained in the late 1950s and early 1960s also indicated a similar vertical distribution of 7Be near 70°N. Injection of stratospheric air through tropopause folds associated with the Arctic jet near 70°N appears to explain the presence of a layer of air near 4–5 km in the high Arctic free troposphere with elevated 7Be concentrations. The vertical distribution of 210Pb showed a distinct difference between the high-Arctic and sub-Arctic in the summer of 1988. At latitudes greater than 65°N, 210Pb concentrations at 3–6 km were elevated compared to those below 1 km. The reverse of this trend was observed near 60°N. These same vertical distributions were also apparent in aerosol SO42−, determined in separate aerosol samples collected on the same flights (Talbot et al., this issue). The results for 210Pb suggest that some of the difference between the summer troposphere in the high- and sub-Arctic is also due to enhanced stratosphere-troposphere exchange in the vicinity of the Arctic jet. These observations, and other findings from ABLE 3A presented in this issue, suggest that for some species the stratosphere may be a principal source influencing their distribution in the Arctic summer troposphere. For example, intrusions of stratospheric air constitute the dominant source term for tropospheric budgets of 7Be and ozone, and may be important in the 210Pb, SO42−, and NOybudgets. Further investigation, including determination of detailed 7Be and 210Pb distributions, is needed to quantify the stratospheric impact on the chemistry of the Arctic troposphere during the summer
Chandra Observations of A2670 and A2107: A Comet Galaxy and cDs with Large Peculiar Velocities
We present an analysis of Chandra observations of the galaxy clusters A2670
and A2107. Their cD galaxies have large peculiar velocities (>200km/s) and thus
the clusters appear to be undergoing mergers. In A2670, we find a comet-like
structure around one of the brightest galaxies. At the leading edge of the
structure, there is a cold front. The mass of the X-ray gas in the comet-like
structure suggests that the galaxy was in a small cluster or group, and its
intracluster medium (ICM) is being stripped by ram-pressure. The regions of
cool interstellar medium (ISM) of the cD galaxies in A2670 and A2107 are very
compact. This is similar to the brightest galaxies in the Coma cluster, which
is also a merging cluster. In each galaxy, the short cooling time of the ISM
requires a heating source; the compact nature of the ISM makes it unlikely that
the heating source is a central active galactic nucleus (AGN).Comment: PASJ in pres
Luminous X-ray Flares from Low Mass X-ray Binary Candidates in the Early-Type Galaxy NGC 4697
We report results of the first search specifically targeting short-timescale
X-ray flares from low-mass X-ray binaries in an early-type galaxy. A new method
for flare detection is presented. In NGC 4697, the nearest, optically luminous,
X-ray faint elliptical galaxy, 3 out of 157 sources are found to display flares
at >99.95% probability, and all show more than one flare. Two sources are
coincident with globular clusters and show flare durations and luminosities
similar to (but larger than) Type-I X-ray superbursts found in Galactic neutron
star (NS) X-ray binaries (XRBs). The third source shows more extreme flares.
Its flare luminosity (~6E39 erg/s) is very super-Eddington for an NS and is
similar to the peak luminosities of the brightest Galactic black hole (BH)
XRBs. However, the flare duration (~70 s) is much shorter than are typically
seen for outbursts reaching those luminosities in Galactic BH sources.
Alternative models for the flares are considered.Comment: Astrophysical Journal Letters, accepted: 4 page
Effluent sampling of Titan 3 C vehicle exhaust
Downwind in situ ground-level measurements of the exhaust from a Titan 3 C launch vehicle were made during a normal launch. The measurement activity was conducted as part of an overall program to obtain field data for comparison with the multilayer dispersion model currently being used to predict the behavior of rocket vehicle exhaust clouds. All measurements were confined to land, ranging from the launch pad to approximately 2 kilometers downwind from the pad. Measurement systems included detectors for hydrogen chloride (HCl), carbon dioxide (CO2), and particulates (Al2O3). Airborne and ground-based optical systems were employed to monitor exhaust cloud rise, growth, and movement. These measurement systems, located along the ground track (45 deg azimuth from the launch pad) of the exhaust cloud, showed no effluents attributable to the launch. Some hydrogen chloride and aluminum oxide were detected in the surface wind direction (15 deg azimuth) from the pad. Comparisons with the model were made in three areas: (1) assumption of cloud geometry at stabilization; (2) prediction of cloud stabilization altitude; and (3) prediction of the path of cloud travel. In addition, the importance of elemental analyses of the particulate samples is illustrated
Experimental measurements of the ground cloud growth during the 11 February 1974, Titan-Centaur launch at Kennedy Space Center
The Titan-Centaur was launched from Kennedy Space Center on February 11, 1974 at 0948 eastern daylight time. Ground level effluent measurements were obtained from the solid rocket motors for comparison with NASA diffusion models for predicting effluent ground level concentrations and cloud behavior. The results obtained provide a basis for an evaluation of such key model inputs such as cloud rise rate, stabilization altitude, crosswind growth, volume expansion, and cloud trajectory. Ground level effluent measurements were limited because of changing meteorological conditions, incorrect instrument location, and operational problems. Based on the measurement results, operational changes are defined. Photographs of the ground exhaust clouds are shown. The chemical composition of the exhaust gases was analyzed and is given
Geared-elevator flutter study
An experimental and analytical study was made of the transonic flutter characteristics of a supersonic transport tail assembly model having an all-movable, horizontal tail with a geared elevator. Two model configurations, namely, one with a gear-elevator (2.8 to 1.0 gear ratio) and one with locked-elevator (1.0 to 1.0 gear ratio), were flutter tested in the Langley transonic dynamics tunnel with an empennage cantilever-mounted on a sting. The geared-elevator configuration fluttered experimentally at about 20% higher dynamic pressures than the locked-elevator configuration. The experimental flutter dynamic pressure boundaries for both configurations were nearly flat over a Mach number range from 0.9 to 1.1. Flutter calculations (mathematical models) were made for the geared-elevator configuration using three subsonic lifting-surface methods. In one method, the elevator was treated as a discrete surface, and in the other two methods, the stabilizer and elevator were treated as a single warped-surface with the primary difference between these two methods being in the mathematical implementation used. A comparison of the experimental and analytical results shows that the discrete-elevator method predicted best the experimental flutter dynamic pressure level. However, the single warped-surface methods predicts more closely the experimental flutter frequencies and Mach number trends
Experimental and analytical transonic flutter characteristics of a geared-elevator configuration
The flutter model represented the aft fuselage and empennage of a proposed supersonic transport airplane and had an all movable horizontal tail with a geared elevator. It was tested mounted from a sting in the transonic dynamics tunnel. Symmetric flutter boundaries were determined experimentally at Mach numbers from 0.7 to 1.14 for a geared elevator configuration (gear ratio of 2.8 to 1.0) and an ungeared elevator configuration (gear ratio of 1.0 to 1.0). Gearing the elevator increased the experimental flutter dynamic pressures about 20 percent. Flutter calculations were made for the geared elevator configuration by using two analytical methods based on subsonic lifting surface theory. Both methods analyzed the stabilizer and elevator as a single, deforming surface, but one method also allowed the elevator to be analyzed as hinged from the stabilizer. All analyses predicted lower flutter dynamic pressures than experiment with best agreement (within 12 percent) for the hinged elevator method. Considering the model as mounted from a flexible rather than rigid sting in the analyses, had only a slight effect on the flutter results but was significant in that a sting related vibration mode was identified as a potentially flutter critical mode
Instability of a membrane intersecting a black hole
The stability of a Nambu-Goto membrane at the equatorial plane of the
Reissner-Nordstr{\o}m-de Sitter spacetime is studied. The covariant
perturbation formalism is applied to study the behavior of the perturbation of
the membrane. The perturbation equation is solved numerically. It is shown that
a membrane intersecting a charged black hole, including extremely charged one,
is unstable and that the positive cosmological constant strengthens the
instability.Comment: 12 pages, 3 figures, to be published in Physical Review
Launch vehicle effluent measurements during the September 5, 1977, Titan 3 launch at Air Force eastern test range
Airborne effluent measurements and cloud physical behavior data are presented. The monitoring program included airborne effluent measurements in situ in the launch cloud, visible and infrared photography of cloud growth and physical behavior, and limited surface collection of rain samples. Effluent measurements included concentrations of HCl, Cl2, NO, nitric oxide, and particles as a function of time in the exhaust cloud. In situ particle mass concentration and number density were measured as a function of time and size in the range of 0.05 micron m to 30 micron m diameter. Measurement results were similar to those of previous launch monitorings. Maximum HCl and nitric oxide concentrations of Cl2 were maximum about 2 minutes after launch and by 10 to 15 minutes had decayed to less than 10 ppb (detection limit). Particle measurements showed most of the particles present to be below about 3-micron m diameter. Postlaunch analyses of collected particle samples showed significant amounts of Al (some cases Cl) from about 3-micron m to 0.04-micron m diameter
- …