A Novel Conductometric Urea Biosensor with Improved Analytical Characteristic Based on Recombinant Urease Adsorbed on Nanoparticle of Silicalite

Development of a conductometric biosensor for the urea detection has been reported. It was created using a non-typical method of the recombinant urease immobilization via adsorption on nanoporous particles of silicalite. It should be noted that this biosensor has a number of advantages, such as simple and fast performance, the absence of toxic compounds during biosensor preparation, and high reproducibility (RSD = 5.1 %). The linear range of urea determination by using the biosensor was 0.05–15 mM, and a lower limit of urea detection was 20 μM. The bioselective element was found to be stable for 19 days. The characteristics of recombinant urease-based biomembranes, such as dependence of responses on the protein and ion concentrations, were investigated. It is shown that the developed biosensor can be successfully used for the urea analysis during renal dialysis

Enzymes in analytical chemistry

There are three main fields of modern analytical chemistry where enzymes are presented: (1) biorecognition, biosensing and biodetection schemes, especially important in case of biosensors, (2) enzymes as analytes, and (3) enzymes as markers in immune- and genoanalysis. These analytical fields could be illustrated by the research of bioanalytics group supervised by professor Stanisław Głąb

The influence of different dressings on the pH of the wound environment

This study examines the effect of various wound dressings on the pH levels of a wound, using a simulated wound environment. The pH levels of a 4 different wound dressings (manuka honey dressing, sodium carboxymethylcellulose hydrofiber dressing, polyhydrated ionogen-coated polymer mesh dressing, and a protease modulating collagen cellulose dressing) were tested in a simulated horse serum wound environment. The effect of local buffering was observed and pH changes in real time were measured. All dressings were found to have low pH (below pH 4), with the lowest being the protease modulating collage cellulose dressing, with a pH of 2.3. The dressing with the strongest acid concentration was the polyhydrated, ionogen-coated, polymer mesh dressing. The low pH and strong acidic nature of the dressing investigated indicate that they may play a role in influencing the healing process in a wound

A new, improved sensor for ascorbate determination at copper hexacyanoferrate modified carbon film electrodes

A new, improved sensor for the electrocatalytic determination of ascorbate has been developed that has both a low applied operating potential and a low detection limit. The sensor was constructed by depositing copper hexacyanoferrate film either electrochemically or chemically onto carbon film electrode, and it was then characterised by cyclic voltammetry and electrochemical impedance spectroscopy. Chemically deposited films were shown to be the best for ascorbate determination and were used as an amperometric sensor at +0.05 V versus SCE to determine ascorbate in wines and juice. The linear range extended to 5 mM with a limit of detection of 2.1 µM, the sensor was stable for more than four months, and it could be used continuously for at least 20 days

Immobilization of drugs for glaucoma treatment

Abstract Recently there have been some developments in the preparation of controlled drug delivery systems for glaucoma. Many materials are being used in this area, namely gelatine and chitosan. Both of them present high levels of biocompatibility and biodegradability. In this paper, we wish to report the work we have been doing on the preparation and characterization of hydrogels based on gelatine and chitosan. The crosslinking agents used were 1-(3-(Dimethylamino)propyl)-3-Ethylcarbodiimide hydrocholide (CDI), 1,4-Butanodiol diglycidyl ether (epoxyde 1), Ethylene glycol diglycidyl ether (epoxyde 2) and genipin. The results obtained showed that all of the films were hydrogels. The surface and transversal cut showed a porous surface in all the films. The thermal analysis proved the modifications in the polymeric chains, with the stabilization of all of them by the crosslinking agents. The release pattern indicates that the gelatine films were the best since they release the adequate proportion of drug. Finally, the cytotoxicity showed that the gelatine films were all biocompatible, specially the ones crosslinked with one of the Epoxydes

Development of electrochemical biosensors based on sol-gel enzyme encapsulation and protective polymer membranes

Abstract Protective polymer coatings have been used to enhance the retention of enzymes in sol-gel films as immobilisation phases in electrochemical biosensors. Carbon film electrodes were electrochemically modified with poly(neutral red) (PNR). These electrodes were coated with oxysilane sol-gels incorporating glucose oxidase and an outer coating of carboxylated PVC (CPVC) or polyurethane (PU), with and without Aliquat-336 or isopropyl myristate (IPM) plasticizer, was applied. The biosensors were characterised electrochemically using cyclic voltammetry and amperometry, electrochemical impedance spectroscopy and scanning electron microscopy. Impedance spectra showed that the electrode surface is most active when the sol-gel–GOx layer is not covered with a membrane. However, membranes without plasticizer extend the lifetime of the biosensor to more than 2 months when PU is used as an outer membrane. The linear range of the biosensors was found to be 0.05–0.50 mM of glucose and the biosensor with PU outer membrane exhibited higher sensitivity (ca.117 nA mM-1) in the region of linear response than that with CPVC. The biosensors were applied to glucose measurement in natural samples of commercial orange juice