Resistive plate chambers for time-of-flight measurements

The applications of Resistive Plate Chambers (RPCs) have recently been extended by the development of counters with time resolution below 100 ps sigma for minimum ionising particles. Applications to HEP experiments have already taken place and many further applications are under study. In this work we address the operating principles of such counters along with some present challenges, with emphasis on counter aging.Comment: Presented at "PSD6 - 6th International Conference on Position Sensitive Detectors", 9-13 September 2002, Leicester, UK. Submitted to Nuclear Instruments and Methods

High Resolution RPC's for Large TOF Systems

Here we report on a particular type of RPC that presents up to 99% efficiency for minimum ionizing particles and a very sharp time resolution, below 50 ps sigma in the most optimized conditions. Our 9 cm2 cells, made with glass and metal electrodes that form accurately spaced gaps of a few hundred micrometers, are operated at atmospheric pressure in non-flammable gases and can be economically produced in large quantities, opening perspectives for the construction of large area time of flight systems.Comment: 10 pages, 8 figure

Advances in the Development of Micropattern Gaseous Detectors with Resistive Electrodes

We describe the most recent efforts made by various groups in implementing resistive electrodes in micropattern gaseous detectors with the aim to combine in the same design the best features of RPCs (for the example, their robustness and spark protection property) with the high granularity and thus the good position resolution offered by microelectronic technology. In the stream of this activity, we have recently developed two novel detectors with resistive electrodes: one was based on resistive micromeshes and the second one is a MSGC with resistive electrodes. We have demonstrated that the resistive meshes are a convenient construction element for various designs of spark protective detectors: RPCs type, GEM type and MICROMEGAS type. These new detectors enable to considerably enhance the RPC and micropattern detectors applications since they feature not only a high position resolution but also a relatively good energy resolution (25-30 persent FWHM at 6 keV) and, if necessary, they can operate in cascaded mode allowing the achievement of a high overall gas gain. The main conclusion from these studies is that the implementation of resistive electrodes in micropattern detectors makes them fully spark protected; on this basis we consider this direction very promising

High Resolution Timing of MIPs with RPCs

Proposal of abstract for RPC99, Bari, Italy, 28-29 October 1999. RPCs made with glass and metal electrodes, forming accurately spaced gaps of a few hundred micrometres, have reached timing accuracies below 70 ps with efficiencies above 95This type of detector, operating at atmospheric pressure with non-flammable gases, seems well suited for large area TOF sytems, providing performances comparable to the existing scintillator-based TOF technology but with significantly lower price per channel.In this work we describe the principles of operation and the performance of several chamber configurations

Superior capsular reconstruction: current evidence and limits

The treatment of rotator cuff tears (RCTs) has evolved. Nonsurgical treatment is adequate for many patients; however, for those for whom surgical treatment is indicated, rotator cuff repair provides reliable pain relief and good functional results. However, massive and irreparable RCTs are a significant challenge for both patients and surgeons. Superior capsular reconstruction (SCR) has become increasingly popular in recent years. It works by passively restoring the superior restriction of the humeral head, thus restoring the pair of forces and improving the kinematics of the glenohumeral joint. Early clinical results using fascia lata (FL) autograft were promising in terms of pain relief and function. The procedure has evolved, and some authors have suggested that FL autografts could be replaced by other methods. However, surgical techniques for SCR are highly variable, and patient indications remain undefined. There are concerns that the available scientific evidence does not support the popularity of the procedure. This review aimed to critically evaluate the biomechanics, indications, procedural considerations, and clinical outcomes associated with the SCR procedure.info:eu-repo/semantics/publishedVersio

Demonstration of new possibilities of multilayer technology on resistive microstrip/ microdot detectors

The first successful attempts to optimize the electric field in Resistive Microstrip Gas Chamber and resistive microdot detectors using additional field shaping strips located inside the detector substrate are describedComment: Presented at the RD-51 mmini week, CERN, June 201

On the physics and technology of gaseous particle detectors

Despite an already long and fruitful history, gaseous elementary-particle detectors remain today an important mainstay of high-energy and nuclear physics experiments and of radiation detection in general. In here we briefly describe some of the gaseous detector's main technologies and applications, along with some unsolved gas-discharge physics aspects of practical relevance.Comment: Submitted to Plasma Sources in Science and Technolog