289 research outputs found
Frontiers of beam diagnostics in plasma accelerators: measuring the ultra-fast and ultra-cold
Advanced diagnostics are essential tools in the development of plasma-based accelerators. The accurate measurement of the quality of beams at the exit of the plasma channel is crucial to optimize the parameters of the plasma accelerator. 6D electron beam diagnostics will be reviewed with emphasis on emittance measurement, which is particularly complex due to large energy spread and divergence of the emerging beams, and on femtosecond bunch length measurements
Conceptual design of electron beam diagnostics for high brightness plasma accelerator
A design study of the diagnostics of a high brightness linac, based on X-band
structures, and a plasma accelerator stage, has been delivered in the framework
of the EuPRAXIA@SPARC_LAB project. In this paper, we present a conceptual
design of the proposed diagnostics, using state of the art systems and new and
under development devices. Single shot measurements are preferable for plasma
accelerated beams, including emittance, while m level and fs scale beam
size and bunch length respectively are requested. The needed to separate the
driver pulse (both laser or beam) from the witness accelerated bunch imposes
additional constrains for the diagnostics. We plan to use betatron radiation
for the emittance measurement just at the end of the plasma booster, while
other single-shot methods must be proven before to be implemented. Longitudinal
measurements, being in any case not trivial for the fs level bunch length, seem
to have already a wider range of possibilities
Longitudinal phase-space manipulation with beam-driven plasma wakefields
The development of compact accelerator facilities providing high-brightness
beams is one of the most challenging tasks in field of next-generation compact
and cost affordable particle accelerators, to be used in many fields for
industrial, medical and research applications. The ability to shape the beam
longitudinal phase-space, in particular, plays a key role to achieve high-peak
brightness. Here we present a new approach that allows to tune the longitudinal
phase-space of a high-brightness beam by means of a plasma wakefields. The
electron beam passing through the plasma drives large wakefields that are used
to manipulate the time-energy correlation of particles along the beam itself.
We experimentally demonstrate that such solution is highly tunable by simply
adjusting the density of the plasma and can be used to imprint or remove any
correlation onto the beam. This is a fundamental requirement when dealing with
largely time-energy correlated beams coming from future plasma accelerators
Overview of Plasma Lens Experiments and Recent Results at SPARC_LAB
Beam injection and extraction from a plasma module is still one of the
crucial aspects to solve in order to produce high quality electron beams with a
plasma accelerator. Proper matching conditions require to focus the incoming
high brightness beam down to few microns size and to capture a high divergent
beam at the exit without loss of beam quality. Plasma-based lenses have proven
to provide focusing gradients of the order of kT/m with radially symmetric
focusing thus promising compact and affordable alternative to permanent magnets
in the design of transport lines. In this paper an overview of recent
experiments and future perspectives of plasma lenses is reported
Focusing of high-brightness electron beams with active-plasma lenses
Plasma-based technology promises a tremendous reduction in size of accelerators used for research, medical, and industrial applications, making it possible to develop tabletop machines accessible for a broader scientific community. By overcoming current limits of conventional accelerators and pushing particles to larger and larger energies, the availability of strong and tunable focusing optics is mandatory also because plasma-accelerated beams usually have large angular divergences. In this regard, active-plasma lenses represent a compact and affordable tool to generate radially symmetric magnetic fields several orders of magnitude larger than conventional quadrupoles and solenoids. However, it has been recently proved that the focusing can be highly nonlinear and induce a dramatic emittance growth. Here, we present experimental results showing how these nonlinearities can be minimized and lensing improved. These achievements represent a major breakthrough toward the miniaturization of next-generation focusing devices
Temperature analysis in the shock waves regime for gas-filled plasma capillaries in plasma-based accelerators
Plasma confinement represents a crucial point for plasma-based accelerators and plasma lenses because it can strongly affect the beam properties. For this reason, an accurate measurement of the plasma parameters, as plasma temperature, pressure and electron density, must be performed. In this paper, we introduce a novel method to detect the plasma temperature and the pressure for gas-filled capillaries in use at the SPARC-LAB test facility. The proposed method is based on the shock waves produced at the ends of the capillary during the gas discharge and the subsequent plasma formation inside it. By measuring the supersonic speed of the plasma outflow, the thermodynamic parameters have been obtained both outside and inside the capillary. A plasma temperature around 1.4 eV has been measured, that depends on the geometric properties and the operating conditions of the capillary
Beam manipulation for resonant plasma wakefield acceleration
Plasma-based acceleration has already proved the ability to reach ultra-high accelerating gradients. However
the step towards the realization of a plasma-based accelerator still requires some e
ff ort to guarantee high brightness beams, stability and reliability. A significant improvement in the efficiency of PWFA has been
demonstrated so far accelerating a witness bunch in the wake of a higher charge driver bunch. The transformer
ratio, therefore the energy transfer from the driver to the witness beam, can be increased by resonantly exciting
the plasma with a properly pre-shaped drive electron beam. Theoretical and experimental studies of beam
manipulation for resonant PWFA will be presented her
Frontiers of beam diagnostics in plasma accelerators
Advanced diagnostics tools are crucial in the development of plasma-based accelerators. Accurate measurements of the beam quality at the exit of the plasma channel are mandatory for the optimization of the plasma accelerator. 6D electron beam diagnostics will be reviewed with emphasis on emittance measurement, which is particularly complex due to the peculiarity of the emerging beams
Delivery status of the ELI-NP gamma beam system
International audienceThe ELI-NP GBS is a high intensity and monochromatic gamma source under construction in Magurele (Romania). The design and construction of the Gamma Beam System complex as well as the integration of the technical plants and the commissioning of the overall facility, was awarded to the Eurogammas Consortium in March 2014. The delivery of the facility has been planned in for 4 stages and the first one was fulfilled in October 31st 2015. The engineering aspects related to the delivery stage 1 are presented
First single-shot and non-intercepting longitudinal bunch diagnostics for comb-like beam by means of Electro-Optic Sampling
At SPARC-LAB,we have installed an Electro-Optic Sampling(EOS)experiment for single shot,non-
destructive measurements of the longitudinal distribution charge of individual electron bunches.The
profile of the electron bunch field is electro-optically encoded into aTi:Sa laser, having 130fs(rms)pulse
length, directly derived from the photocathode's laser. The bunch profile information is spatially
retrieved,i.e.,the laser crosses with an angle of 30 degrees with respect to the normal to the surface of EO
crystal(ZnTe,GaP)and the bunch longitudinal profile is mapped into the laser's transverse profile.
In particular,we used the EOS for a single-shot direct visualization of the time profile of a comb-like
electron beam,consisting of two bunches, about 100fs(rms)long,sub-picosecond spaced with a total
charge of 160pC. The electro-optic measurements(done with both ZnTe and GaP crystals)have been
validated with both RF Deflector (RFD)and Michelson interferometer measurements
- …