Comparison between Actual and Perceived Height of Parents of Children with Short Stature and Controls

Objectives. We investigate whether parents complaining of their children's short stature have misconception of their height. Methods. Parents were asked to report their own height and were then measured. We compared the difference between reported and actual height of parents of children with short stature (CSS) with that of parents coming for a well child care visit (WCC) and parents of children referred to the endocrinologist without short stature (Endo). The accuracy of reported height from short (below 25%) and tall (above 75%) parents was compared. Results. The CSS fathers were shorter than WCC (P < .01) fathers. The CSS mothers were shorter than the Endo (P < .01) and WCC (P < .001) mothers. There was no difference between reported and actual height when comparing the groups based on the reason for the visit or based on the parental height. Conclusions. Parents of CSS and short parents do not have a misconception of their height

Palatability of forage plants in North-west sheep pastures

A DECLINE in carrying capacity has occurred in large areas of the Pilbara district of the North-West, due to the decrease in palatable plants and the increase in unpalatable ones. The relative palatability of the various species to sheep is therefore a matter of considerable importance to pastoralists

Addressing Disruptive Behaviors in the Preschool Classroom: An Adaptation of Parent-Child Interaction Therapy (PCIT) for Head Start Teachers

Several researchers have begun to investigate early intervention and prevention programs, seeking to alter the trajectory of early-onset behavior problems. While it appears that multi-modal programs are the most promising approach, researchers have only recently begun to evaluate programs that use a similar treatment approach across settings and there is currently little information about classroom-based treatments for disruptive behaviors among preschoolers. The purpose of this study was to develop a classroom-based intervention based on the Parent-Child Interaction Therapy (PCIT) model developed by Eyberg. In addition, this study provides an initial investigation of the efficacy of this program with an emphasis on evaluating changes in teacher behavior and treatment acceptability. The intervention was provided to a group of 26 teachers from 13 Head Start classrooms. Results indicated minimal changes in observed teaching behavior and no significant changes in teachers\u27 self-efficacy. Although the intervention was rated as being acceptable by teachers overall, ratings were somewhat lower for sessions dealing with child-directed activities; teacher comments indicated that this component was difficult to implement in the classroom. Observations of child behavior indicated reductions in both prosocial and disruptive behaviors. Teacher-completed rating scales indicated statistically significant reductions in disruptive child behaviors and child behavior problems, although the magnitude of these changes was generally small. The implications of these findings will be discussed and modifications will be proposed for increasing the effectiveness and acceptability of this intervention

The Influence of Parental Attributions and Parenting Behaviors on the Attributions Utilized by Children With and Without Attention-Deficit/Hyperactivity Disorder

Research suggests that the causal attributions utilized by children with attentiondeficit/ hyperactivity disorder (ADHD) differ from those of nonclinical children. Additionally, research indicates differences among the mothers of children with and without ADHD regarding parenting behaviors and attributions for child behavior. In this study, children\u27 s attributions , maternal attributions , and maternal discipline styles were examined in ADHD and non-ADHD populations Participants included 26 children diagnosed with ADHD and their mothers as well as a nonclinical sample of 24 children who had never been diagnosed with ADHD and their mothers. The results support the hypotheses that child and maternal attributions would differ between these two groups. The hypothesis that discipline styles would differ between the two groups was not supported Results suggest that while maternal discipline styles are correlated with children\u27s attributions, the nature of this association differs within AD.HD versus nonADHD populations

A model of ant route navigation driven by scene familiarity

In this paper we propose a model of visually guided route navigation in ants that captures the known properties of real behaviour whilst retaining mechanistic simplicity and thus biological plausibility. For an ant, the coupling of movement and viewing direction means that a familiar view specifies a familiar direction of movement. Since the views experienced along a habitual route will be more familiar, route navigation can be re-cast as a search for familiar views. This search can be performed with a simple scanning routine, a behaviour that ants have been observed to perform. We test this proposed route navigation strategy in simulation, by learning a series of routes through visually cluttered environments consisting of objects that are only distinguishable as silhouettes against the sky. In the first instance we determine view familiarity by exhaustive comparison with the set of views experienced during training. In further experiments we train an artificial neural network to perform familiarity discrimination using the training views. Our results indicate that, not only is the approach successful, but also that the routes that are learnt show many of the characteristics of the routes of desert ants. As such, we believe the model represents the only detailed and complete model of insect route guidance to date. What is more, the model provides a general demonstration that visually guided routes can be produced with parsimonious mechanisms that do not specify when or what to learn, nor separate routes into sequences of waypoints

Auxiliary propulsion system flight package

Hughes Aircraft Company developed qualified and integrated flight, a flight test Ion Auxiliary Propulsion System (IAPS), on an Air Force technology satellite. The IAPS Flight Package consists of two identical Thruster Subsystems and a Diagnostic Subsystem. Each thruster subsystem (TSS) is comprised of an 8-cm ion Thruster-Gimbal-Beam Shield Unit (TGBSU); Power Electronics Unit; Digital Controller and Interface Unit (DCIU); and Propellant Tank, Valve and Feed Unit (PTVFU) plus the requisite cables. The Diagnostic Subsystem (DSS) includes four types of sensors for measuring the effect of the ion thrusters on the spacecraft and the surrounding plasma. Flight qualifications of IAPS, prior to installation on the spacecraft, consisted of performance, vibration and thermal-vacuum testing at the unit level, and thermal-vacuum testing at the subsystem level. Mutual compatibility between IAPS and the host spacecraft was demonstrated during a series of performance and environmental tests after the IAPS Flight Package was installed on the spacecraft. After a spacecraft acoustic test, performance of the ion thrusters was reverified by removing the TGBSUs for a thorough performance test at Hughes Research Laboratories (HRL). The TGBSUs were then reinstalled on the spacecraft. The IAPS Flight Package is ready for flight testing when Shuttle flights are resumed

Engineering model 8-cm thruster subsystem

An Engineering Model (EM) 8 cm Ion Thruster Propulsion Subsystem was developed for operation at a thrust level 5 mN (1.1 mlb) at a specific impulse 1 sub sp = 2667 sec with a total system input power P sub in = 165 W. The system dry mass is 15 kg with a mercury-propellant-reservoir capacity of 8.75 kg permitting uninterrupted operation for about 12,500 hr. The subsystem can be started from a dormant condition in a time less than or equal to 15 min. The thruster has a design lifetime of 20,000 hr with 10,000 startup cycles. A gimbal unit is included to provide a thrust vector deflection capability of + or - 10 degrees in any direction from the zero position. The EM subsystem development program included thruster optimization, power-supply circuit optimization and flight packaging, subsystem integration, and subsystem acceptance testing including a cyclic test of the total propulsion package

Gas hydrate concentration estimates from chlorinity, electrical resistivity and seismic velocity

Gas hydrate beneath the N. Cascadia continental slope off Vancouver Island occurs as a regional diffuse layer above the BSR and as local high concentrations in large vent or upwelling structures. Regional concentrations of gas hydrate beneath the N. Cascadia continental slope off Vancouver Island have been estimated earlier using multichannel seismic, seafloor electrical, and IODP Leg 146 downhole data. The concentrations of between 15 and 30% of pore saturation in a 100 m thick layer above the BSR are much higher than estimated elsewhere where there is good data, especially the Blake Ridge and central Cascadia off Oregon on ODP Leg 204. Although both of these other studies involved different sediment environments, a careful re-evaluation of the N. Cascadia estimates seemed desirable. We have re-evaluated the methods used to calculate the gas hydrate concentrations from pore-water chlorinity (salinity), electrical resistivity, and seismic velocity, describing in detail the assumptions and uncertainties. Use of the pore-water chlorinity/salinity and electrical resistivity directly have low reliability because of the effect on the no-hydrate reference of hydrate formation and dissociation, and the effect of pore fluid freshening by clay dehydration. At ODP Site 889/890 hydrate concentrations range from 5–10% to 30–40%, depending on the no-hydrate reference salinity used. Use of core salinity data along with the downhole and seafloor electrical resistivity data allows calculation of both the in situ reference salinity and the hydrate concentrations. The most important uncertainty in this method is the relation between resistivity and porosity, i.e., Archie’s Law parameters. Significantly different relations were determined from the ODP Leg 146 core and downhole log data, the log data resistivity-porosity relation giving much lower concentrations. Finally, seismic velocities from sonic-logs and multichannel data can be used to calculate gas hydrate concentrations, if an appropriate no-hydrate velocity-depth profile can be estimated. A velocity-hydrate concentration relation is also required. Depending on which no-hydrate/no-gas velocity baseline is used, estimated hydrate concentrations range from as low as 5% to above 25% saturation. In spite of having three nearly independent methods of estimating hydrate concentrations, it is concluded that the data allow regional concentrations in the 100 m layer above the BSR from less than 5% to over 25% saturation (3-13% of sediment volume). ODP drilling in the region scheduled for the fall of 2005 should help resolve the uncertainties

Separating Reflection and Transmission Images in the Wild

The reflections caused by common semi-reflectors, such as glass windows, can impact the performance of computer vision algorithms. State-of-the-art methods can remove reflections on synthetic data and in controlled scenarios. However, they are based on strong assumptions and do not generalize well to real-world images. Contrary to a common misconception, real-world images are challenging even when polarization information is used. We present a deep learning approach to separate the reflected and the transmitted components of the recorded irradiance, which explicitly uses the polarization properties of light. To train it, we introduce an accurate synthetic data generation pipeline, which simulates realistic reflections, including those generated by curved and non-ideal surfaces, non-static scenes, and high-dynamic-range scenes.Comment: accepted at ECCV 201