A magnetorheological clutch for efficient automotive auxiliary device actuation

In this paper the results of a project funded by Regione Toscana aimed at reducing the powerabsorption of auxiliary devices in vehicles are presented. In particular the design, testing and application of amagnetorheological clutch (MR) is proposed, aimed at disengaging the vacuum pump, which draws in air fromthe power-brake booster chamber, in order to reduce the device power absorption.Several clutch preliminary studies done to choose the clutch geometry and the magnetic field supply areillustrated. The final choice consisted in an MR clutch with permanent magnet, which satisfied size, torque andfail-safe specifications. The clutch characteristics, in terms of torque versus slip, were obtained experimentallyfor three different clutch prototypes on an ad-hoc developed test bench.As result of a preliminary simulation, a comparison between the power absorption of a current productionvacuum pump, an innovative vacuum pump and both vacuum pumps coupled with the MR clutch is presented.The New European Driving Cycle is considered for simulating the vacuum pump operation both in urban andhighway driving. Results show that the use of the innovative vacuum pump reduces the device consumption ofabout 35%, whereas the use of MR clutch coupled with the innovative vacuum pump reduces it up to about44% in urban driving and 50% in highway driving

A transverse isotropic viscoelastic constitutive model for aortic valve tissue

A new anisotropic viscoelastic model is developed for application to the aortic valve (AV). The directional dependency in the mechanical properties of the valve, arising from the predominantly circumferential alignment of collagen fibres, is accounted for in the form of transverse isotropy. The rate dependency of the valve's mechanical behaviour is considered to stem from the viscous (η) dissipative effects of the AV matrix, and is incorporated as an explicit function of the deformation rate (λ˙). Model (material) parameters were determined from uniaxial tensile deformation tests of porcine AV specimens at various deformation rates, by fitting the model to each experimental dataset. It is shown that the model provides an excellent fit to the experimental data across all different rates and satisfies the condition of strict local convexity. Based on the fitting results, a nonlinear relationship between η and λ˙ is established, highlighting a ‘shear-thinning’ behaviour for the AV with increase in the deformation rate. Using the model and these outcomes, the stress–deformation curves of the AV tissue under physiological deformation rates in both the circumferential and radial directions are predicted and presented. To verify the predictive capabilities of the model, the stress–deformation curves of AV specimens at an intermediate deformation rate were estimated and validated against the experimental data at that rate, showing an excellent agreement. While the model is primarily developed for application to the AV, it may be applied without the loss of generality to other collagenous soft tissues possessing a similar structure, with a single preferred direction of embedded collagen fibres

On the use of shape memory alloys for deployable passive heat radiators in space satellites

The present work presents a multifunctional structure for space engineering application part of the TOPDESS project, funded by ESA. The main aim of the project is the design of a thermal control device able to deploy through passive actuation. A combined device has been designed, made up of a Pulsating Heat Pipe (PHP) foldable heat exchanger and Shape Memory Alloy (SMA) wire. The deployment of the SMA wire is conceived to be controlled by thermal contact with the heat source and by conduction along the wire. Since the heat sources are lumped and the wire is subject to convection, a temperature gradient develops along the wire. A monodimensional mode able to predict the behavior of an SMA wire subjected to a spatial temperature gradient, is presented in this paper. The results show that the system can carry out folding and unfolding cycles with rotation angles greater than 80° only if the wire is subjected to uniform temperature distribution; in the case of temperature gradient, the achievable rotation angle is about 20°. The analysis states the feasibility of the actuation system, highlighting the critical technological aspects, to lay the groundwork for the future development of the whole system

a magnetorheological clutch for efficient automotive auxiliary device actuation

In this paper the results of a project funded by Regione Toscana aimed at reducing the power absorption of auxiliary devices in vehicles are presented. In particular the design, testing and application of a magnetorheological clutch (MR) is proposed, aimed at disengaging the vacuum pump, which draws in air from the power-brake booster chamber, in order to reduce the device power absorption. Several clutch preliminary studies done to choose the clutch geometry and the magnetic field supply are illustrated. The final choice consisted in an MR clutch with permanent magnet, which satisfied size, torque and fail-safe specifications. The clutch characteristics, in terms of torque versus slip, were obtained experimentally for three different clutch prototypes on an ad-hoc developed test bench. As result of a preliminary simulation, a comparison between the power absorption of a current production vacuum pump, an innovative vacuum pump and both vacuum pumps coupled with the MR clutch is presented. The New European Driving Cycle is considered for simulating the vacuum pump operation both in urban and highway driving. Results show that the use of the innovative vacuum pump reduces the device consumption of about 35%, whereas the use of MR clutch coupled with the innovative vacuum pump reduces it up to about 44% in urban driving and 50% in highway driving

Education in mine waste engineering: the experience of "SIGEO" Master's Course

On 19th July 1985 the failure of two tailings dams at the service of a fluorite mine in the Stava Valley (Italy) caused the death of 268 people and severe environmental and socioeconomic damage. Similar accidents have happened in Sgorigrad (Bulgaria, 1966), Aberfan (U.K., 1966), Buffalo Creek (USA, 1972), Aznalcollar (Spain, 1998), Taoshi (China, 2008) and many other places worldwide. The European Union has recognized the seriousness of the problems concerning the management and disposal of mining waste (over 400 million tonnes per year worldwide). With the 2006/21/CE Directive, the EU has urged all member States to carry out censuses, monitoring and consolidation of existing structures under the supervision of qualified experts. These experts should be provided with interdisciplinary knowledge that is difficult to attain during normal degree courses. For this reason, the Trento and Modena-Reggio Emilia Universities and the Turin Polytechnic have set up a post-graduate Master’s Course in “Analysis and Management of Geotechnical Structures”. The article describes the interdisciplinary approach adopted in the course and aims to stimulate the sharing of this initiative among other European Universities

Embryonic stem cell-derived CD166+ precursors develop into fully functional sinoatrial-like cells

Rationale: A cell-based biological pacemaker is based on the differentiation of stem cells and the selection of a population displaying the molecular and functional properties of native sinoatrial node (SAN) cardiomyocytes. So far, such selection has been hampered by the lack of proper markers. CD166 is specifically but transiently expressed in the mouse heart tube and sinus venosus, the prospective SAN. Objective: We have explored the possibility of using CD166 expression for isolating SAN progenitors from differentiating embryonic stem cells. Methods and Results: We found that in embryonic day 10.5 mouse hearts, CD166 and HCN4, markers of the pacemaker tissue, are coexpressed. Sorting embryonic stem cells for CD166 expression at differentiation day 8 selects a population of pacemaker precursors. CD166(+) cells express high levels of genes involved in SAN development (Tbx18, Tbx3, Isl-1, Shox2) and function (Cx30.2, HCN4, HCN1, CaV1.3) and low levels of ventricular genes (Cx43, Kv4.2, HCN2, Nkx2.5). In culture, CD166(+) cells form an autorhythmic syncytium composed of cells morphologically similar to and with the electrophysiological properties of murine SAN myocytes. Isoproterenol increases (+57%) and acetylcholine decreases (-23%) the beating rate of CD166-selected cells, which express the -adrenergic and muscarinic receptors. In cocultures, CD166-selected cells are able to pace neonatal ventricular myocytes at a rate faster than their own. Furthermore, CD166(+) cells have lost pluripotency genes and do not form teratomas in vivo. Conclusions: We demonstrated for the first time the isolation of a nonteratogenic population of cardiac precursors able to mature and form a fully functional SAN-like tissue

Microfluidic manufacture of lipid-based nanomedicines

Nanoparticulate technologies have revolutionised drug delivery allowing for passive and active targeting, altered biodistribution, control drug release (temporospatial or triggered), enhanced sta-bility, improved solubilisation capacity, reduction of dose and adverse effects. However, their manufacture remains immature, and challenges exist in industrial scale due to high batch-to-batch variability hindering their clinical translation. Lipid-based nanomedicines remain the most-widely approved nanomedicines and their current manufacturing methods remain discontinuous and face several problems such as high batch-to-batch variability affecting the critical quality attributes (CQAs) of the product, laborious multi-step processes, need for an expert workforce and are not easily amenable to industrial scale-up involving typically a complex process control. Several tech-niques have emerged in recent years for nanomedicine manufacture, but a paradigm shift occurred when microfluidic strategies able to mix fluids in channels with dimensions of tens of micrometers and small volumes of liquid reagents in a highly controlled manner to form nanoparticles with tunable and reproducible structure are employed. In this review, we summarize the recent ad-vancements in the manufacturing of lipid-based nanomedicines using microfluidics with particular emphasis on the parameters that govern the control of CQAs of final nanomedicines. The impact of microfluidic environments on formation dynamics of nanomaterials, and the application of mi-crodevices as platforms for nanomaterial screening were also discussed