Electrochemical detection device

A standard pH reference electrode and a platinum cathodic electrode are positioned in a container with suitable nutrient medium for microbial growth plus the sample to be tested. The two electrodes are connected to electronic circuitry including an up/down counter whicn counts up for the first 80 minutes after a test has initiated. Then the potential between the two electrodes is tracked by the electronic circuitry and after there is a change of 10 mv a signal is sent to the up/down counter to cause it to reverse its count. When there is a additional 20 mv change in the potential between the two electrodes another signal is sent to the up/down counter, signalling it to stop. The resulting count on the counter is equal to the length of time for the inoculum to begin the production of measurable amounts of H2 after inoculation

Automated single-slide staining system

Apparatus developed to Gram-stain single slides automatically is flexible enough to accommodate other types of staining procedures. Method frees operator and eliminates necessity for subjective evaluations as to length of staining or decolorizing time

Driving extreme variability: The evolving corona and evidence for jet launching in Markarian 335

Variations in the X-ray emission from the narrow line Seyfert 1 galaxy, Markarian 335 (Mrk 335), are studied on both long and short timescales through observations made between 2006 and 2013 with XMM-Newton, Suzaku and NuSTAR. Changes in the geometry and energetics of the corona that give rise to this variability are inferred through measurements of the relativistically blurred reflection seen from the accretion disc. On long timescales, we find that during the high flux epochs the corona has expanded, covering the inner regions of the accretion disc out to a radius of 26(-7,+10)rg. The corona contracts to within 12rg and 5rg in the intermediate and low flux epochs, respectively. While the earlier high flux observation made in 2006 is consistent with a corona extending over the inner part of the accretion disc, a later high flux observation that year revealed that the X-ray source had become collimated into a vertically-extended jet-like corona and suggested relativistic motion of material upward. On short timescales, we find that an X-ray flare during a low flux epoch in 2013 corresponded to a reconfiguration from a slightly extended corona to one much more compact, within just 2~3rg of the black hole. There is evidence that during the flare itself, the spectrum softened and the corona became collimated and slightly extended vertically as if a jet-launching event was aborted. Understanding the evolution of the X-ray emitting corona may reveal the underlying mechanism by which the luminous X-ray sources in AGN are powered.Comment: 21 pages, 9 figures. Accepted for publication in MNRA

Description and field test of an in situ coliform monitoring system

A prototype in situ system for monitoring the levels of fecal coliforms in shallow water bodies was developed and evaluated. This system was based on the known relationship between the concentration of the coliform bacteria and the amount of hydrogen they produce during growth in a complex organic media. The prototype system consists of a sampler platform, which sits on the bottom; a surface buoy, which transmits sampler-generated data; and a shore station, which receives, displays the data, and controls the sampler. The concept of remote monitoring of fecal coliform concentrations by utilizing a system based on the electrochemical method was verified during the evaluation of the prototype

Apparatus and process for microbial detection and enumeration

An apparatus and process for detecting and enumerating specific microorganisms from large volume samples containing small numbers of the microorganisms is presented. The large volume samples are filtered through a membrane filter to concentrate the microorganisms. The filter is positioned between two absorbent pads and previously moistened with a growth medium for the microorganisms. A pair of electrodes are disposed against the filter and the pad electrode filter assembly is retained within a petri dish by retainer ring. The cover is positioned on base of petri dish and sealed at the edges by a parafilm seal prior to being electrically connected via connectors to a strip chart recorder for detecting and enumerating the microorganisms collected on filter

Assessing the long-distance repellency of long-lasting insecticide netting to a suite of post-harvest insects

Insects are our main competitors for food on the planet (1). In fact, growers lose 10-30% of crops during storage, processing, and marketing after harvest each year to stored product insects (2,3). Challenges to current management include increasing insecticide resistance to phosphine (4), which is the most common insect fumigant. Another challenge has been an increasing demand for organic or low insecticide-input products by consumers (5). To meet these challenges we came up with an alternative management approach, a long lasting insecticide netting (LLIN). Insecticide-treated nets have been widely used as a tool for malaria vector control in tropical regions since the early 1990s (6). These nets are typically treated with a pyrethroid insecticide, such as permethrin or deltamethrin, which repel, incapacitate, and kill mosquitoes that land on the nets. Researchers have recently begun exploring the use of LLINs for management of agricultural pests in high value specialty crops (7). More recently, work with LLINs in post-harvest settings has demonstrated that this tool can induce mortality, as well as significantly decrease the movement and dispersal capacity of post-harvest insects (8). Some possible uses for LLIN include being used to line windows, vents, eaves, or other openings into food facilities. However, anecdotal evidence from IPM practitioners has suggested that pyrethroids, which the LLIN contains, may be repellent to specific groups of insects. In order for LLIN to be an effective tool at intercepting and preventing infestation by stored product insects, we must demonstrate that the netting is not repellent to a range of post-harvest insects

Measuring micro-organism gas production

Transducer, which senses pressure buildup, is easy to assemble and use, and rate of gas produced can be measured automatically and accurately. Method can be used in research, in clinical laboratories, and for environmental pollution studies because of its ability to detect and quantify rapidly the number of gas-producing microorganisms in water, beverages, and clinical samples