CO hydrogenation over K‐Co‐MoSₓ catalyst to mixed alcohols: A kinetic analysis

Higher alcohol synthesis (HAS) from syngas is one of the most promising approaches to produce fuels and chemicals. Our recent investigation on HAS showed that potassium‐promoted cobalt‐molybdenum sulfide is an effective catalyst system. In this study, the intrinsic kinetics of the reaction were studied using this catalyst system under realistic conditions. The study revealed the major oxygenated products are linear alcohols up to butanol and methane is the main hydrocarbon. The higher alcohol products (C3+) followed an Anderson‐Schultz‐Flory distribution while the catalyst suppressed methanol and ethanol formation. The optimum reaction conditions were estimated to be at temperature of 340°C, pressure of 117 bar, gas hourly space velocity of 27 000 mL g–1 h–1 and H2/CO molar feed ratio of 1. A kinetic network has been considered and kinetic parameters were estimated by nonlinear regression of the experimental data. The results indicated an increasing apparent activation energy of alcohols with the length of alcohols except for ethanol. The lower apparent activation energy of alcohols compared with hydrocarbon evidenced the efficiency of this catalyst system to facilitate the formation of higher alcohols

Indication of asymptotic scaling in the reactions dd→p3dd\to p^3H, dd→n3dd\to n^3He and dp→dpdp\to dp

It is shown that the differential cross sections of the reactions $dd\to ^3He n$ and $dd\to ^3H p$ measured at c.m.s.scattering angle$\theta_{cm}=60^\circ$ in the interval of the deuteron beam energy 0.5 - 1.2 GeV demonstrate the scaling behaviour,$d\sigma/d t\sim s^{-22}$, which follows from constituent quark counting rules. It is found also that the differential cross section of the elastic $dp\to dp$ scattering at $\theta_{cm}=125^\circ-135^\circ$ follows the scaling regime $\sim s^{-16}$ at beam energies 0.5 - 5 GeV. These data are parameterized here using the Reggeon exchange.Comment: 6 pages, Latex, 2 eps figures; final version accepted by Pis'ma v ZHETF, corrected and completed reference

Estimating offsets for avian displacement effects of anthropogenic impacts

Biodiversity offsetting, or compensatory mitigation, is increasingly being used in temperate grassland ecosystems to compensate for unavoidable environmental damage from anthropogenic developments such as transportation infrastructure, urbanization, and energy development. Pursuit of energy independence in the United States will expand domestic energy production. Concurrent with this increased growth is increased disruption to wildlife habitats, including avian displacement from suitable breeding habitat. Recent studies at energy-extraction and energy-generation facilities have provided evidence for behavioral avoidance and thus reduced use of habitat by breeding waterfowl and grassland birds in the vicinity of energy infrastructure. To quantify and compensate for this loss in value of avian breeding habitat, it is necessary to determine a biologically based currency so that the sufficiency of offsets in terms of biological equivalent value can be obtained. We describe a method for quantifying the amount of habitat needed to provide equivalent biological value for avifauna displaced by energy and transportation infrastructure, based on the ability to define five metrics: impact distance, impact area, pre-impact density, percent displacement, and offset density. We calculate percent displacement values for breeding waterfowl and grassland birds and demonstrate the applicability of our avian-impact offset method using examples for wind and oil infrastructure. We also apply our method to an example in which the biological value of the offset habitat is similar to the impacted habitat, based on similarity in habitat type (e.g., native prairie), geographical location, land use, and landscape composition, as well as to an example in which the biological value of the offset habitat is dissimilar to the impacted habitat. We provide a worksheet that informs potential users how to apply our method to their specific developments and a framework for developing decision-support tools aimed at achieving landscape-level conservation goals

The Chandra Source Catalog

The Chandra Source Catalog (CSC) is a general purpose virtual X-ray astrophysics facility that provides access to a carefully selected set of generally useful quantities for individual X-ray sources, and is designed to satisfy the needs of a broad-based group of scientists, including those who may be less familiar with astronomical data analysis in the X-ray regime. The first release of the CSC includes information about 94,676 distinct X-ray sources detected in a subset of public ACIS imaging observations from roughly the first eight years of the Chandra mission. This release of the catalog includes point and compact sources with observed spatial extents <~ 30''. The catalog (1) provides access to the best estimates of the X-ray source properties for detected sources, with good scientific fidelity, and directly supports scientific analysis using the individual source data; (2) facilitates analysis of a wide range of statistical properties for classes of X-ray sources; and (3) provides efficient access to calibrated observational data and ancillary data products for individual X-ray sources, so that users can perform detailed further analysis using existing tools. The catalog includes real X-ray sources detected with flux estimates that are at least 3 times their estimated 1 sigma uncertainties in at least one energy band, while maintaining the number of spurious sources at a level of <~ 1 false source per field for a 100 ks observation. For each detected source, the CSC provides commonly tabulated quantities, including source position, extent, multi-band fluxes, hardness ratios, and variability statistics, derived from the observations in which the source is detected. In addition to these traditional catalog elements, for each X-ray source the CSC includes an extensive set of file-based data products that can be manipulated interactively.Comment: To appear in The Astrophysical Journal Supplement Series, 53 pages, 27 figure

Statistical Characterization of the Chandra Source Catalog

The first release of the Chandra Source Catalog (CSC) contains ~95,000 X-ray sources in a total area of ~0.75% of the entire sky, using data from ~3,900 separate ACIS observations of a multitude of different types of X-ray sources. In order to maximize the scientific benefit of such a large, heterogeneous data-set, careful characterization of the statistical properties of the catalog, i.e., completeness, sensitivity, false source rate, and accuracy of source properties, is required. Characterization efforts of other, large Chandra catalogs, such as the ChaMP Point Source Catalog (Kim et al. 2007) or the 2 Mega-second Deep Field Surveys (Alexander et al. 2003), while informative, cannot serve this purpose, since the CSC analysis procedures are significantly different and the range of allowable data is much less restrictive. We describe here the characterization process for the CSC. This process includes both a comparison of real CSC results with those of other, deeper Chandra catalogs of the same targets and extensive simulations of blank-sky and point source populations.Comment: To be published in the Astrophysical Journal Supplement Series (Fig. 52 replaced with a version which astro-ph can convert to PDF without issues.

SEAHORSE project : Dealing with maritime workarounds and developing smarter procedures

EU funded SEAHORSE project is developing a novel approach to improve maritime SOPs. SEAHORSE Project’s ‘Smart Procedures Concept’ aims to develop a system to capture the behavioural adaptations that crew have developed in order to cope with operational demands and challenges. Initially, a detailed survey was conducted worldwide to capture seafarer’s safety attitudes as well as the common workarounds. Then, these collected workarounds will be categorised through conducting risk and benefit analysis. Accordingly, safe workarounds will be approved as Standard Operating Procedures (SOPs), on the other hand, measures will be proposed to prevent reoccurrence of unsafe workarounds. This paper will present the proposed approach to deal with maritime workarounds and report the preliminary results of the analysis

Expert consensus and recommendations on safety criteria for active mobilization of mechanically ventilated critically ill adults

Introduction: The aim of this study was to develop consensus recommendations on safety parameters for mobilizing adult, mechanically ventilated, intensive care unit (ICU) patients. Methods: A systematic literature review was followed by a meeting of 23 multidisciplinary ICU experts to seek consensus regarding the safe mobilization of mechanically ventilated patients. Results: Safety considerations were summarized in four categories: respiratory, cardiovascular, neurological and other. Consensus was achieved on all criteria for safe mobilization, with the exception being levels of vasoactive agents. Intubation via an endotracheal tube was not a contraindication to early mobilization and a fraction of inspired oxygen less than 0.6 with a percutaneous oxygen saturation more than 90% and a respiratory rate less than 30 breaths/minute were considered safe criteria for in- and out-of-bed mobilization if there were no other contraindications. At an international meeting, 94 multidisciplinary ICU clinicians concurred with the proposed recommendations. Conclusion: Consensus recommendations regarding safety criteria for mobilization of adult, mechanically ventilated patients in the ICU have the potential to guide ICU rehabilitation whilst minimizing the risk of adverse events

Evolution of Wenger's concept of community of practice

<p>Abstract</p> <p>Background</p> <p>In the experience of health professionals, it appears that interacting with peers in the workplace fosters learning and information sharing. Informal groups and networks present good opportunities for information exchange. Communities of practice (CoPs), which have been described by Wenger and others as a type of informal learning organization, have received increasing attention in the health care sector; however, the lack of uniform operating definitions of CoPs has resulted in considerable variation in the structure and function of these groups, making it difficult to evaluate their effectiveness.</p> <p>Objective</p> <p>To critique the evolution of the CoP concept as based on the germinal work by Wenger and colleagues published between 1991 and 2002.</p> <p>Discussion</p> <p>CoP was originally developed to provide a template for examining the learning that happens among practitioners in a social environment, but over the years there have been important divergences in the focus of the concept. Lave and Wenger's earliest publication (1991) centred on the interactions between novices and experts, and the process by which newcomers create a professional identity. In the 1998 book, the focus had shifted to personal growth and the trajectory of individuals' participation within a group (i.e., peripheral versus core participation). The focus then changed again in 2002 when CoP was applied as a managerial tool for improving an organization's competitiveness.</p> <p>Summary</p> <p>The different interpretations of CoP make it challenging to apply the concept or to take full advantage of the benefits that CoP groups may offer. The tension between satisfying individuals' needs for personal growth and empowerment versus an organization's bottom line is perhaps the most contentious of the issues that make CoPs difficult to cultivate. Since CoP is still an evolving concept, we recommend focusing on optimizing specific characteristics of the concept, such as support for members interacting with each other, sharing knowledge, and building a sense of belonging within networks/teams/groups. Interventions that facilitate relationship building among members and that promote knowledge exchange may be useful for optimizing the function of these groups.</p