Automated preparation of Kepler time series of planet hosts for asteroseismic analysis

One of the tasks of the Kepler Asteroseismic Science Operations Center (KASOC) is to provide asteroseismic analyses on Kepler Objects of Interest (KOIs). However, asteroseismic analysis of planetary host stars presents some unique complications with respect to data preprocessing, compared to pure asteroseismic targets. If not accounted for, the presence of planetary transits in the photometric time series often greatly complicates or even hinders these asteroseismic analyses. This drives the need for specialised methods of preprocessing data to make them suitable for asteroseismic analysis. In this paper we present the KASOC Filter, which is used to automatically prepare data from the Kepler/K2 mission for asteroseismic analyses of solar-like planet host stars. The methods are very effective at removing unwanted signals of both instrumental and planetary origins and produce significantly cleaner photometric time series than the original data. The methods are automated and can therefore easily be applied to a large number of stars. The application of the filter is not restricted to planetary hosts, but can be applied to any solar-like or red giant stars observed by Kepler/K2.Comment: Accepted for publication in MNRA

K2P2^2: Reduced data from campaigns 0-4 of the K2 mission

Context: After the loss of a second reaction wheel the Kepler mission was redesigned as the K2 mission, pointing towards the ecliptic and delivering data for new fields approximately every 80 days. The steady flow of data obtained with a reduced pointing stability calls for dedicated pipelines for extracting light curves and correcting these for use in, e.g., asteroseismic analysis. Aims: We provide corrected light curves for the K2 fields observed until now (campaigns 0-4), and provide a comparison with other pipelines for K2 data extraction/correction. Methods: Raw light curves are extracted from K2 pixel data using the "K2-pixel-photometry" (K2P$^2$) pipeline, and corrected using the KASOC filter. Results: The use of K2P$^2$ allows for the extraction of the order of 90.000 targets in addition to 70.000 targets proposed by the community - for these, other pipelines provide no data. We find that K2P$^2$ in general performs as well as, or better than, other pipelines for the tested metrics of photometric quality. In addition to stars, pixel masks are properly defined using K2P$^2$ for extended objects such as galaxies for which light curves are also extracted.Comment: Accepted for publication in Astronomy and Astrophysic

Damping rates and frequency corrections of Kepler LEGACY stars

Linear damping rates and modal frequency corrections of radial oscillation modes in selected LEGACY main-sequence stars are estimated by means of a nonadiabatic stability analysis. The selected stellar sample covers stars observed by Kepler with a large range of surface temperatures and surface gravities. A nonlocal, time-dependent convection model is perturbed to assess stability against pulsation modes. The mixing-length parameter is calibrated to the surface-convection-zone depth of a stellar model obtained from fitting adiabatic frequencies to the LEGACY observations, and two of the nonlocal convection parameters are calibrated to the corresponding LEGACY linewidth measurements. The remaining nonlocal convection parameters in the 1D calculations are calibrated so as to reproduce profiles of turbulent pressure and of the anisotropy of the turbulent velocity field of corresponding 3D hydrodynamical simulations. The atmospheric structure in the 1D stability analysis adopts a temperature-optical-depth relation derived from 3D hydrodynamical simulations. Despite the small number of parameters to adjust, we find good agreement with detailed shapes of both turbulent pressure profiles and anisotropy profiles with depth, and with damping rates as a function of frequency. Furthermore, we find the absolute modal frequency corrections, relative to a standard adiabatic pulsation calculation, to increase with surface temperature and surface gravity.Comment: accepted for publication in Monthly Notices of the Royal Astronomical Society (MNRAS); 15 pages, 8 figure

Why should we correct reported pulsation frequencies for stellar line-of-sight Doppler velocity shifts?

In the age of Kepler and Corot, extended observations have provided estimates of stellar pulsation frequencies that have achieved new levels of precision, regularly exceeding fractional levels of a few parts in $10^{4}$. These high levels of precision now in principle exceed the point where one can ignore the Doppler shift of pulsation frequencies caused by the motion of a star relative to the observer. We present a correction for these Doppler shifts and use previously published pulsation frequencies to demonstrate the significance of the effect. We suggest that reported pulsation frequencies should be routinely corrected for stellar line-of-sight velocity Doppler shifts, or if a line-of-sight velocity estimate is not available, the frame of reference in which the frequencies are reported should be clearly stated.Comment: 5 pages, 1 figure, accepted for publication in MNRAS Letter

Super-Nyquist asteroseismology of solar-like oscillators with Kepler and K2 - expanding the asteroseismic cohort at the base of the red-giant branch

We consider the prospects for detecting solar-like oscillations in the "super-Nyquist" regime of long-cadence (LC) Kepler photometry, i.e., above the associated Nyquist frequency of approximately 283 {\mu}Hz. Targets of interest are cool, evolved subgiants and stars lying at the base of the red-giant branch. These stars would ordinarily be studied using the short-cadence (SC) data, since the associated SC Nyquist frequency lies well above the frequencies of the detectable oscillations. However, the number of available SC target slots is quite limited. This imposes a severe restriction on the size of the ensemble available for SC asteroseismic study.We find that archival Kepler LC data from the nominal Mission may be utilized for asteroseismic studies of targets whose dominant oscillation frequencies lie as high as approximately 500 {\mu}Hz, i.e., about 1.75- times the LC Nyquist frequency. The frequency detection threshold for the shorter-duration science campaigns of the re-purposed Kepler Mission, K2, is lower. The maximum threshold will probably lie somewhere between approximately 400 and 450 {\mu}Hz. The potential to exploit the archival Kepler and K2 LC data in this manner opens the door to increasing significantly the number of subgiant and low-luminosity red-giant targets amenable to asteroseismic analysis, overcoming target limitations imposed by the small number of SC slots.We estimate that around 400 such targets are now available for study in the Kepler LC archive. That number could potentially be a lot higher for K2, since there will be a new target list for each of its campaigns.Comment: Accepted for publication in MNRAS; 11 pages, 7 figures; reference list update

NGC 6819: testing the asteroseismic mass scale, mass loss, and evidence for products of non-standard evolution

We present an extensive peakbagging effort on Kepler data of $\sim$50 red giant stars in the open star cluster NGC 6819. By employing sophisticated pre-processing of the time series and Markov Chain Monte Carlo techniques we extracted individual frequencies, heights and linewidths for hundreds of oscillation modes. We show that the "average" asteroseismic parameter $\delta\nu_{02}$, derived from these, can be used to distinguish the stellar evolutionary state between the red giant branch (RGB) stars and red clump (RC) stars. Masses and radii are estimated using asteroseismic scaling relations, both empirically corrected to obtain self-consistency as well as agreement with independent measures of distance, and using updated theoretical corrections. Remarkable agreement is found, allowing the evolutionary state of the giants to be determined exclusively from the empirical correction to the scaling relations. We find a mean mass of the RGB stars and RC stars in NGC 6819 to be $1.61\pm0.02\,\textrm{M}_\odot$ and $1.64{\pm}0.02\,\textrm{M}_\odot$, respectively. The difference $\Delta M=-0.03\pm0.01\,\textrm{M}_\odot$ is almost insensitive to systematics, suggesting very little RGB mass loss, if any. Stars that are outliers relative to the ensemble reveal overmassive members that likely evolved via mass-transfer in a blue straggler phase. We suggest that KIC 4937011, a low-mass Li-rich giant, is a cluster member in the RC phase that experienced very high mass-loss during its evolution. Such over- and undermassive stars need to be considered when studying field giants, since the true age of such stars cannot be known and there is currently no way to distinguish them from normal stars.Comment: 21 pages, 11 figure

K2P2^2 −- A photometry pipeline for the K2 mission

With the loss of a second reaction wheel, resulting in the inability to point continuously and stably at the same field of view, the NASA Kepler satellite recently entered a new mode of observation known as the K2 mission. The data from this redesigned mission present a specific challenge; the targets systematically drift in position on a ~6 hour time scale, inducing a significant instrumental signal in the photometric time series --- this greatly impacts the ability to detect planetary signals and perform asteroseismic analysis. Here we detail our version of a reduction pipeline for K2 target pixel data, which automatically: defines masks for all targets in a given frame; extracts the target's flux- and position time series; corrects the time series based on the apparent movement on the CCD (either in 1D or 2D) combined with the correction of instrumental and/or planetary signals via the KASOC filter (Handberg & Lund 2014), thus rendering the time series ready for asteroseismic analysis; computes power spectra for all targets, and identifies potential contaminations between targets. From a test of our pipeline on a sample of targets from the K2 campaign 0, the recovery of data for multiple targets increases the amount of potential light curves by a factor ${\geq}10$. Our pipeline could be applied to the upcoming TESS (Ricker et al. 2014) and PLATO 2.0 (Rauer et al. 2013) missions.Comment: 14 pages, 20 figures, Accepted for publication in The Astrophysical Journal (Apj

Oscillation mode linewidths and heights of 23 main-sequence stars observed by Kepler

Solar-like oscillations have been observed by Kepler and CoRoT in many solar-type stars, thereby providing a way to probe the stars using asteroseismology. We provide the mode linewidths and mode heights of the oscillations of various stars as a function of frequency and of effective temperature. We used a time series of nearly two years of data for each star. The 23 stars observed belong to the simple or F-like category. The power spectra of the 23 main-sequence stars were analysed using both maximum likelihood estimators and Bayesian estimators, providing individual mode characteristics such as frequencies, linewidths, and mode heights. We study the source of systematic errors in the mode linewidths and mode heights, and we present a way to correct these errors with respect to a common reference fit. Using the correction, we could explain all sources of systematic errors, which could be reduced to less than $\pm$15% for mode linewidths and heights, and less than $\pm$5% for amplitude, when compared to the reference fit. The effect of a different estimated stellar background and a different estimated splitting will provide frequency-dependent systematic errors that might affect the comparison with theoretical mode linewidth and mode height, therefore affecting the understanding of the physical nature of these parameters. All other sources of relative systematic errors are less dependent upon frequency. We also provide the dependence of the so-called linewidth dip, in the middle of the observed frequency range, as a function of effective temperature. We show that the depth of the dip decreases with increasing effective temperature. The dependence of the dip on effective temperature may imply that the mixing length parameter $\alpha$ or the convective flux may increase with effective temperature.Comment: Accepted by A&A, 38 pages, 35 figures, 26 table

Increasing and Evolving Role of Smart Devices in Modern Medicine

Today is an age of rapid digital integration, yet the capabilities of modern-day smartphones and smartwatches are underappreciated in daily clinical practice. Smartphones are ubiquitous, and smartwatches are very common and on the rise. This creates a wealth of information simply waiting to be accessed, studied and applied clinically, ranging from activity level to various heart rate metrics. This review considers commonly used devices, the validity and accuracy of the data they obtain and potential clinical application of the data