2,792 research outputs found
The Altitude Wind Tunnel (AWT): A unique facility for propulsion system and adverse weather testing
A need has arisen for a new wind tunnel facility with unique capabilities for testing propulsion systems and for conducting research in adverse weather conditions. New propulsion system concepts, new aircraft configurations with an unprecedented degree of propulsion system/aircraft integration, and requirements for aircraft operation in adverse weather dictate the need for a new test facility. Required capabilities include simulation of both altitude pressure and temperature, large size, full subsonic speed range, propulsion system operation, and weather simulation (i.e., icing, heavy rain). A cost effective rehabilitation of the NASA Lewis Research Center's Altitude Wind Tunnel (AWT) will provide a facility with all these capabilities
Flight Reynolds number effects on a contoured boattail nozzle at subsonic speeds
A contoured boattail nozzle typical of those used on a twin-engine fighter was tested on an underwing nacelle mounted on an F-106B aircraft. The gas generator was a J85-GE-13 turbojet engine. The effects of Reynolds number, Mach number, and angle of attack on boattail drag and boattail pressure profiles were investigated. Increasing Reynolds number caused a slight reduction in boattail drag at both Mach 0.7 and 0.9. The nozzle had relatively low boattail drag even though the flow was separated over a large portion of the boattail
Energy efficient aircraft engines
The three engine programs that constitute the propulsion portion of NASA's Aircraft Energy Efficiency Program are described, their status indicated, and anticipated improvements in SFC discussed. The three engine programs are (1) Engine Component Improvement--directed at current engines, (2) Energy Efficiency Engine directed at new turbofan engines, and (3) Advanced Turboprops--directed at technology for advanced turboprop--powered aircraft with cruise speeds to Mach 0.8. Unique propulsion system interactive ties to the airframe resulting from engine design features to reduce fuel consumption are discussed. Emphasis is placed on the advanced turboprop since it offers the largest potential fuel savings of the three propulsion programs and also has the strongest interactive ties to the airframe
Stability of the Submillimeter Brightness of the Atmosphere Above Mauna Kea, Chajnantor and the South Pole
The summit of Mauna Kea in Hawaii, the area near Cerro Chajnantor in Chile,
and the South Pole are sites of large millimeter or submillimeter wavelength
telescopes. We have placed 860 GHz sky brightness monitors at all three sites
and present a comparative study of the measured submillimeter brightness due to
atmospheric thermal emission. We report the stability of that quantity at each
site.Comment: 6 figure
Health hazards of ultrafine metal and metal oxide powders
Study reveals that suggested threshold limit values are from two to fifty times lower than current recommended threshold limit values. Proposed safe limits of exposure to the ultrafine dusts are based on known toxic potential of various materials as determined in particle size ranges
Flight Reynolds number effects on a fighter-type, circular-arc-19 deg conic boattail nozzle at subsonic speeds
A circular-arc - conic boattail nozzle, typical of those used on a twin engine fighter, was tested on an underwing nacelle mounted on an F-106B aircraft. The boattail had a radius ratio r/r sub c of 0.41 and a terminal boattail angle of approximately 19 deg. The gas generator was a J85-GE-13 turbojet engine. The effects of Reynolds number and angle of attack on boattail pressure drag and boattail pressure profiles were investigated. Increasing Reynolds number resulted in reduced boattail drag at both Mach numbers of 0.6 and 0.9
Reply to ``Comment on `Hole-burning experiments within glassy models with infinite range interactions' ''
This is a reply to the comments by Richter and Chamberlin, and Diezemann and
Bohmer to our paper (Phys. Rev. Lett. 85, 3448 (2000)). As further evidence for
the claims in this Letter, we here reproduce the nonlinear spectral
hole-burning experimental protocol in an equilibrated fully connected
spin-glass model and we exhibit frequency selectivity, together with a shift in
the base of the spectral hole.Comment: 1 page, two figures, to appear in Phys. Rev. Let
The wintertime South Pole tropospheric water vapor column: Comparisons of radiosonde and recent terahertz radiometry, use of the saturated column as a proxy measurement, and inference of decadal trends
We use a fifty-year record of wintertime radiosonde observations at the South Pole to estimate the precipitable water vapor column (PWV) over the entire period. Humidity data from older radiosondes is of limited reliability; however, we think an estimation of PWV is possible using temperature data because the wintertime lower troposphere is very close to saturated. From temperature data we derived PWV_SAT which is the PWV if the troposphere was saturated over the entire column. Comparisons to recent radiosonde humidity data indicate that PWV ≃ 0.88PWV_SAT. Since 1998 a CMU/NRAO 860 GHz atmospheric radiometer has been operating at the South Pole producing zenith opacity data, τo. It is expected that τo ∝ PWV, and also τ_o ∝ PWV_SAT, since the lower atmospheric column is near to saturation. We compare trends in τo, PWV_SAT, and PWV. PWV and PWV_SAT showed little trend in the last fifty years, 1961 to 2010, except perhaps in the last two decades, when PWVSAT was below average, followed by an increasing trend to above average. This increasing trend in the last decade was also observed in τo, except for the final two years when it appears that something changed in the instrument response. PWV_SAT is a useful metric for estimating PWV in the earlier years of wintertime South Pole radiosonde, and it is generally useful for evaluating the wintertime performance of radiosonde humidity and atmospheric opacity instrumentation
Space Plasma Ion Processing of the Lunar Soil: Modeling of Radiation-Damaged Rim Widths on Lunar Grains
Chemically and microstructurally complex altered rims around grains in the finest size fraction (<20 micron) of the lunar regolith are the result of multi-stage processes involving both solar ion radiation damage and nanoscale deposition of impact or sputter-derived vapors. The formation of the rims is an important part of the space weathering process, and is closely linked to key changes in optical reflectance and other bulk properties of the lunar surface. Recent application of field-emission scanning transmission electron microscope techniques, including energy dispersive X-ray spectral imaging, is making it easier to unravel the "nano-stratigraphy" of grain rims, and to delineate the portions of rims that represent Radiation-Amorphized (RA) host grain from overlying amorphous material that represents vapor/sputter deposits. For the portion of rims formed by host grain amorphization (henceforth called RA rims), we have been investigating the feasibility of using Monte Carlo-type ion-atom collision models, combined with experimental ion irradiation data, to derive predictive numerical models linking the width of RA rims to the grain s integrated solar ion radiation exposure time
- …