Late-phase melt progression experiment: MP-2. Results and analysis

In-pile experiments addressing late-phase processes in Light Water Reactors (LWRs) were performed in the Annular Core Research Reactor (ACRR) at Sandia National Laboratories. Melt Progression (MP) experiments were designed to provide information to develop and verify computer models for analysis of LWR core damage in severe accidents. Experiments examine the formation and motion of ceramic molten pools in disrupted reactor core regions. The MP-2 experiment assembly consisted of: (1) a rubble bed of enriched UO{sub 2} and ZrO{sub 2} simulating severely disrupted reactor core regions, (2) a ceramic/metallic crust representing blockage formed by early phase melting, relocation, and refreezing of core components, and (3) an intact rod stub region that remained in place below the blockage region. The test assembly was fission heated in the central cavity of the ACRR at an average rate of about 0.2 KA, reaching a peak molten pool temperature around 3400 K. Melting of the debris bed ceramic components was initiated near the center of the bed. The molten material relocated downward, refreezing to form a ceramic crust near the bottom of the rubble bed. As power levels were increased, the crust gradually remelted and reformed at progressively lower positions in the bed until late in the experiment when it penetrated into and attacked the ceramic/metallic blockage. The metallic components of the blockage region melted and relocated to the bottom of the intact rod stub region before the ceramic melt penetrated the blockage region from above. The ceramic pool penetrated halfway into the blockage region by the end of the experiment. Measurements of thermal response and material relocation are compared to the results of the computer simulations. Postexperiment examination of the assembly with the associated material interactions and metallurgy are also discussed in detail with the analyses and interpretation of results. 16 refs., 206 figs., 24 tabs

CFD analysis of coolant mixing in VVER-1000/V320 reactor pressure vessel

This study presents a code-to-code and model-to-model comparison of coolant mixing in the VVER-1000/V320 Kozloduy Unit 6 nuclear power plant using Computational Fluid Dynamics (CFD). Four different CFD codes were used to simulate coolant mixing in the reactor vessel, namely ANSYS Fluent, ANSYS CFX, TrioCFD, and STAR-CCM+. Two different approaches were used to model the upper plenum, while a single simplified model was used for the reactor pressure vessel. The simulations were performed for VVER-1000 coolant transient benchmark (V1000CT-2) mixing exercise. The results were compared between the different CFD codes and models to assess the accuracy and consistency of the simulations with the available experimental data. Overall, the results showed good agreement between the different CFD codes and models, with minor differences observed in some cases. The simplified models were found to be sufficient for predicting the overall coolant mixing patterns observed in the reactor vessel, provided additional insights into the local flow structures and mixing characteristics. This study demonstrates the applicability and reliability of CFD simulations for coolant mixing analysis in VVER-1000/V320 nuclear power plants

European Stroke Organisation (ESO) Guidelines on Management of Unruptured Intracranial Aneurysms

Unruptured intracranial aneurysms (UIA) occur in around 3% of the population. Important management questions concern if and how to perform preventive UIA occlusion; if, how and when to perform follow up imaging and non-interventional means to reduce the risk of rupture. Using the Standard Operational Procedure of ESO we prepared guidelines according to GRADE methodology. Since no completed randomised trials exist, we used interim analyses of trials, and meta-analyses of observational and case-control studies to provide recommendations to guide UIA management. All recommendations were based on very low evidence. We suggest preventive occlusion if the estimated 5-year rupture risk exceeds the risk of preventive treatment. In general, we cannot recommend endovascular over microsurgical treatment, but suggest flow diverting stents as option only when there are no other low-risk options for UIA repair. To detect UIA recurrence we suggest radiological follow up after occlusion. In patients who are initially observed, we suggest radiological monitoring to detect future UIA growth, smoking cessation, treatment of hypertension, but not treatment with statins or acetylsalicylic acid with the indication to reduce the risk of aneurysm rupture. Additionally, we formulated 15 expert-consensus statements. All experts suggest to assess UIA patients within a multidisciplinary setting (neurosurgery, neuroradiology and neurology) at centres consulting >100 UIA patients per year, to use a shared decision-making process based on the team recommendation and patient preferences, and to repair UIA only in centres performing the proposed treatment in >30 patients with (ruptured or unruptured) aneurysms per year per neurosurgeon or neurointerventionalist. These UIA guidelines provide contemporary recommendations and consensus statement on important aspects of UIA management until more robust data come available.info:eu-repo/semantics/publishedVersio

Evidence of gating in hundred nanometer diameter pores: an experimental and theoretical study

We report on the observation of an unexpected gating mechanism at the 100 nm scale on track-etched polycarbonate membranes. Transport measurements of methyl viologen performed by absorption spectroscopy under various pH conditions demonstrated that perfect gating was achieved for 100 nm diameter pores at pH 2, while the positively charged molecular ions moved through the membrane according to diffusion laws at pH 5. An oppositely charged molecular ion, naphthalene disulfonate, in the same membrane, showed the opposite trend: diffusion of the negative ion at pH 2 and perfect gating at pH 5. The influence of parameters such as ionic strength and membrane surface coating were also investigated. A theoretical study of the system shows that at this larger length scale the magnitude of the electric field in the vicinity of the pores is too small to account for the experimental observations, rather, it is the surface trapping of the mobile ion (Cl{sup -} or Na{sup +}) which gives rise to the gating phenomena. This surprising effect might have potential applications for high-throughput separation of large molecules and bio-organisms

Position statement for the diagnosis and management of anogenital warts

Background: Anogenital warts (AGW) can cause economic burden on healthcare systems and are associated with emotional, psychological and physical issues. ----- Objective: To provide guidance to physicians on the diagnosis and management of AGW. ----- Methods: Fourteen global experts on AGW developed guidance on the diagnosis and management of AGW in an effort to unify international recommendations. Guidance was developed based on published international and national AGW guidelines and an evaluation of relevant literature published up to August 2016. Authors provided expert opinion based on their clinical experiences. ----- Results: A checklist for a patient's initial consultation is provided to help physicians when diagnosing AGW to get the relevant information from the patient in order to manage and treat the AGW effectively. A number of frequently asked questions are also provided to aid physicians when communicating with patients about AGW. Treatment of AGW should be individualized and selected based on the number, size, morphology, location, and keratinization of warts, and whether they are new or recurrent. Different techniques can be used to treat AGW including ablation, immunotherapy and other topical therapies. Combinations of these techniques are thought to be more effective at reducing AGW recurrence than monotherapy. A simplified algorithm was created suggesting patients with 1-5 warts should be treated with ablation followed by immunotherapy. Patients with >5 warts should use immunotherapy for 2 months followed by ablation and a second 2-month course of immunotherapy. Guidance for daily practice situations and the subsequent action that can be taken, as well as an algorithm for treatment of large warts, were also created. ----- Conclusion: The guidance provided will help physicians with the diagnosis and management of AGW in order to improve the health and quality of life of patients with AGW

Purinergic inhibition of Na+,K+,Cl− cotransport in C11-MDCK cells: Role of stress-activated protein kinases

Previously, we observed that sustained activation of P2Y1 leads to inhibition of Na+,K+,Cl− cotransport (NKCC) in C11 cells resembling intercalated cells from collecting ducts of the Madin-Darby canine kidney. This study examined the role of stress-activated protein kinases (SAPK) in NKCC inhibition triggered by purinergic receptors. Treatment of C11 cells with ATP led to sustained phosphorylation of SAPK such as JNK and p38. Activation of these kinases also occurred in anisomycin-treated cells. Surprisingly, we observed that compounds SP600125 and SB202190, known as potent inhibitors of JNK and p38 in cell-free systems, activated rather than inhibited phosphorylation of the kinases in C11 cells. Importantly, similarly to ATP, all the above-listed activators of JNK and p38 phosphorylation inhibited NKCC. Thus, our results suggest that activation of JNK and/or p38 contributes to NKCC suppression detected in intercalated-like cells from distal tubules after their exposure to P2Y1 agonists