14,883 research outputs found
Recommended from our members
Two novel nonlinear companding schemes with iterative receiver to reduce PAPR in multi-carrier modulation systems
Companding transform is an efficient and simple method to reduce the Peak-to-Average Power Ratio (PAPR) for Multi-Carrier Modulation (MCM) systems. But if the MCM signal is only simply operated by inverse companding transform at the receiver, the resultant spectrum may exhibit severe in-band and out-of-band radiation of the distortion components, and considerable peak regrowth by excessive channel noises etc. In order to prevent these problems from occurring, in this paper, two novel nonlinear companding schemes with a iterative receiver are proposed to reduce the PAPR. By transforming the amplitude or power of the original MCM signals into uniform distributed signals, the novel schemes can effectively reduce PAPR for different modulation formats and sub-carrier sizes. Despite moderate complexity increasing at the receiver, but it is especially suitable to be combined with iterative channel estimation. Computer simulation results show that the proposed schemes can offer good system performances without any bandwidth expansion
Clean heating and heating poverty: A perspective based on cost-benefit analysis
To improve the air quality in winter, clean heating policy was implemented in â2 + 26â cities of China in 2016, which mainly included replacing coal with gas or electricity. Tremendous financial subsidies have been provided by city and central governments. This new heating mode changed the heating fee-cost to residents. This paper estimates the economic costs to both governments and residents, and evaluates the environmental and public health benefits by combining a difference-in-differences model with an exposure-response function. Results show that the total costs of clean heating were up to 43.1 billion yuan. Governments and residents account for 44% and 56% of the total costs, respectively. In terms of benefits, the clean heating project is effective for air pollution control and brings health economic benefits of about 109.85 billion yuan (95% CI: 22.40â159.83). The clean heating policy was identified as a net-positive benefit program with environmental and public health improvements. However, the inequality in subsidies from different cities governments increases the heating burden on low-income households and leads to heating poverty for households in the less developed regions. We provide suggestions for implementation in future clean heating campaigns and in subsidy mechanism design in China and for other developing countries
Self Assembled II-VI Magnetic Quantum Dot as a Voltage-Controlled Spin-Filter
A key element in the emergence of a full spintronics technology is the
development of voltage controlled spin filters to selectively inject carriers
of desired spin into semiconductors. We previously demonstrated a prototype of
such a device using a II-VI dilute-magnetic semiconductor quantum well which,
however, still required an external magnetic field to generate the level
splitting. Recent theory suggests that spin selection may be achievable in
II-VI paramagnetic semiconductors without external magnetic field through local
carrier mediated ferromagnetic interactions. We present the first experimental
observation of such an effect using non-magnetic CdSe self-assembled quantum
dots in a paramagnetic (Zn,Be,Mn)Se barrier.Comment: 4 pages, 4 figure
Supra-oscillatory critical temperature dependence of Nb-Ho bilayers
We investigate the critical temperature Tc of a thin s-wave superconductor
(Nb) proximity coupled to a helical rare earth ferromagnet (Ho). As a function
of the Ho layer thickness, we observe multiple oscillations of Tc superimposed
on a slow decay, that we attribute to the influence of the Ho on the Nb
proximity effect. Because of Ho inhomogeneous magnetization, singlet and
triplet pair correlations are present in the bilayers. We take both into
consideration when solving the self consistent Bogoliubov-de Gennes equations,
and we observe a reasonable agreement. We also observe non-trivial transitions
into the superconducting state, the zero resistance state being attained after
two successive transitions which appear to be associated with the magnetic
structure of Ho.Comment: Main article: 5 pages, 4 figures; Supplementary materials: 4 pages, 5
figure
X-ray Spectral and timing properties of the black hole x-ray transient Swift J1753.5-0127
We have carried out detailed analysis on the black hole candidate (BHC) X-
ray transient Swift J1753.5-0127 observed by the Rossi X-Ray Timing Explorer
(RXTE) during its outburst in 2005 {2006. The spectral analysis shows that the
emissions are dominated by the hard X-rays, thus revealing the low/hard state
of the source during the outburst. The peak luminosity is found lower than the
typical value of balancing the mass flow and evaporation of the inner edge of
disk (Meyer-Hofmeister 2004). As a result, the disk is prevented from extending
inward to produce strong soft X-rays, corresponding to the so-called high/soft
state. These are the typical characteristics for a small subset of BHCs, i.e.
those soft X-ray transients stay at the low/hard state during the outburst. In
most observational time, the QPO frequencies are found to vary roughly linearly
with the fluxes and the spectral indices, while the deviation from this
relationship at the peak luminosity might provide the first observational
evidence of a partially evaporated inner edge of the accretion disk. The
anti-correlation between the QPO frequency and spectral color suggests that the
global disk oscillation model proposed by Titarchuk & Osherovich (2000) is not
likely at work.Comment: Accepted by ApJ, 24 pages, 13 figures, 3 table
Two-dimensional universal conductance fluctuations and the electron-phonon interaction of topological surface states in Bi2Te2Se nanoribbons
The universal conductance fluctuations (UCFs), one of the most important
manifestations of mesoscopic electronic interference, have not yet been
demonstrated for the two-dimensional surface state of topological insulators
(TIs). Even if one delicately suppresses the bulk conductance by improving the
quality of TI crystals, the fluctuation of the bulk conductance still keeps
competitive and difficult to be separated from the desired UCFs of surface
carriers. Here we report on the experimental evidence of the UCFs of the
two-dimensional surface state in the bulk insulating Bi2Te2Se nanoribbons. The
solely-B\perp-dependent UCF is achieved and its temperature dependence is
investigated. The surface transport is further revealed by weak
antilocalizations. Such survived UCFs of the topological surface states result
from the limited dephasing length of the bulk carriers in ternary crystals. The
electron-phonon interaction is addressed as a secondary source of the surface
state dephasing based on the temperature-dependent scaling behavior
Extreme Sensitivity of Superconductivity to Stoichiometry in FeSe (Fe1+dSe)
The recently discovered iron arsenide superconductors, which display
superconducting transition temperatures as high as 55 K, appear to share a
number of general features with high-Tc cuprates, including proximity to a
magnetically ordered state and robustness of the superconductivity in the
presence of disorder. Here we show that superconductivity in Fe1+dSe, the
parent compound of the superconducting arsenide family, is destroyed by very
small changes in stoichiometry. Further, we show that non-superconducting
Fe1+dSe is not magnetically ordered down to low temperatures. These results
suggest that robust superconductivity and immediate instability against an
ordered magnetic state should not be considered as intrinsic characteristics of
iron-based superconducting systems, and that Fe1+dSe may present a unique
opportunity for determining which materials characteristics are critical to the
existence of superconductivity in high Tc iron arsenide superconductors and
which are not.Comment: Updated to reflect final version and include journal referenc
Sensitivity Analysis of Hybrid Propulsion Transportation System for Human Mars Expeditions
The National Aeronautics and Space Administration continues to develop and refine various transportation options to successfully field a human Mars campaign. One of these transportation options is the Hybrid Transportation System which utilizes both solar electric propulsion and chemical propulsion. The Hybrid propulsion system utilizes chemical propulsion to perform high thrust maneuvers, where the delta-V is most optimal when ap- plied to save time and to leverage the Oberth effect. It then utilizes solar electric propulsion to augment the chemical burns throughout the interplanetary trajectory. This eliminates the need for the development of two separate vehicles for crew and cargo missions. Previous studies considered single point designs of the architecture, with fixed payload mass and propulsion system performance parameters. As the architecture matures, it is inevitable that the payload mass and the performance of the propulsion system will change. It is desirable to understand how these changes will impact the in-space transportation system's mass and power requirements. This study presents an in-depth sensitivity analysis of the Hybrid crew transportation system to payload mass growth and solar electric propulsion performance. This analysis is used to identify the breakpoints of the current architecture and to inform future architecture and campaign design decisions
The Machine Learning Landscape of Top Taggers
Based on the established task of identifying boosted, hadronically decaying
top quarks, we compare a wide range of modern machine learning approaches.
Unlike most established methods they rely on low-level input, for instance
calorimeter output. While their network architectures are vastly different,
their performance is comparatively similar. In general, we find that these new
approaches are extremely powerful and great fun.Comment: Yet another tagger included
- âŠ