Genotyping and biofilm formation of Mycoplasma hyopneumoniae and their association with virulence

Mycoplasma hyopneumoniae, the causative agent of swine respiratory disease, demonstrates differences in virulence. However, factors associated with this variation remain unknown. We herein evaluated the association between differences in virulence and genotypes as well as phenotype (i.e., biofilm formation ability). Strains 168 L, RM48, XLW-2, and J show low virulence and strains 232, 7448, 7422, 168, NJ, and LH show high virulence, as determined through animal challenge experiments, complemented with in vitro tracheal mucosa infection tests. These 10 strains with known virulence were then subjected to classification via multilocus sequence typing (MLST) with three housekeeping genes, P146-based genotyping, and multilocus variable-number tandem-repeat analysis (MLVA) of 13 loci. MLST and P146-based genotyping identified 168, 168 L, NJ, and RM48 as the same type and clustered them in a single branch. MLVA assigned a different sequence type to each strain. Simpson’s index of diversity indicates a higher discriminatory ability for MLVA. However, no statistically significant correlation was found between genotypes and virulence. Furthermore, we investigated the correlation between virulence and biofilm formation ability. The strains showing high virulence demonstrate strong biofilm formation ability, while attenuated strains show low biofilm formation ability. Pearson correlation analysis revealed a significant positive correlation between biofilm formation ability and virulence. To conclude, there was no association between virulence and our genotyping data, but virulence was found to be significantly associated with the biofilm formation ability of M. hyopneumoniae

Challenges in QCD matter physics - The Compressed Baryonic Matter experiment at FAIR

Substantial experimental and theoretical efforts worldwide are devoted to explore the phase diagram of strongly interacting matter. At LHC and top RHIC energies, QCD matter is studied at very high temperatures and nearly vanishing net-baryon densities. There is evidence that a Quark-Gluon-Plasma (QGP) was created at experiments at RHIC and LHC. The transition from the QGP back to the hadron gas is found to be a smooth cross over. For larger net-baryon densities and lower temperatures, it is expected that the QCD phase diagram exhibits a rich structure, such as a first-order phase transition between hadronic and partonic matter which terminates in a critical point, or exotic phases like quarkyonic matter. The discovery of these landmarks would be a breakthrough in our understanding of the strong interaction and is therefore in the focus of various high-energy heavy-ion research programs. The Compressed Baryonic Matter (CBM) experiment at FAIR will play a unique role in the exploration of the QCD phase diagram in the region of high net-baryon densities, because it is designed to run at unprecedented interaction rates. High-rate operation is the key prerequisite for high-precision measurements of multi-differential observables and of rare diagnostic probes which are sensitive to the dense phase of the nuclear fireball. The goal of the CBM experiment at SIS100 (sqrt(s_NN) = 2.7 - 4.9 GeV) is to discover fundamental properties of QCD matter: the phase structure at large baryon-chemical potentials (mu_B > 500 MeV), effects of chiral symmetry, and the equation-of-state at high density as it is expected to occur in the core of neutron stars. In this article, we review the motivation for and the physics programme of CBM, including activities before the start of data taking in 2022, in the context of the worldwide efforts to explore high-density QCD matter.Comment: 15 pages, 11 figures. Published in European Physical Journal

Isolation and Characterization of A Novel Iron–Sulfur Oxidizing Bacterium <i>Acidithiobacillus Ferrooxidans</i> YQ-N3 and its Applicability in Coal Biodesulfurization

Acidithiobacillus ferrooxidans is a chemotrophic, aerobic, acidophilic, and Gram-negative bacterium that plays a key role in iron and sulfur cycling and has a wide range of applications in the industrial field. A novel A. ferrooxidans strain, hereinafter referred to as strain “YQ-N3”, was isolated from sediments of a river polluted by acid mine drainage (AMD) of an abandoned mine in Shanxi, China. The whole genome sequencing results revealed that A. ferrooxidans YQ-N3 has a 3,217,720 bp genome, which is comprised of one circular chromosome and five circular plasmids (Plasmid A, Plasmid B, Plasmid C, Plasmid D, Plasmid E). Plasmid E, a new plasmid, had not been annotated in the reference database. A. ferrooxidans YQ-N3 had a close evolutionary relationship with A. ferrooxidans ATCC23270 and A. ferridurans JCM18981 and exhibited higher similarity in its genomic structure with A. ferrooxidans ATCC23270. Multiple genes related to environmental resistance and iron and sulfur metabolism were predicted from its genome. A. ferrooxidans YQ-N3 can remarkably increase the oxidation rate of Fe2+ and S0 and enhance the hydrophilicity of S0, which was supported by functional gene analysis and laboratory experiments. The biological desulfurization experiment demonstrated that A. ferrooxidans YQ-N3 can reduce the sulfur content in coal by removing pyrite sulfur and organic sulfur

Extended State Observer-Based Fuzzy Adaptive Backstepping Force Control of a Deep-Sea Hydraulic Manipulator with Long Transmission Pipelines

The force tracking control of deep-sea hydraulic manipulator systems with long transmission pipelines is disposed via fuzzy adaptive backstepping control based on an extended state observer in this paper. The pipeline model is established and then used to estimate the pressures in cylinder chambers, which are used to obtain the output force. In this process, the velocity of the piston, which is unmeasured, is needed, and an extended state observer is constructed to estimate the unmeasurable velocity signal. To cope with parameter uncertainties caused by changes in working depth, an adaptive algorithm is combined with the backstepping controller. Fuzzy logic is employed to design self-tuners that can automatically adjust the control parameters to guarantee force control performance from shallow seas to deep seas. The experimental results illustrate the success of the proposed control method. Comparative experimental results demonstrate that the extended state observer-based fuzzy adaptive backstepping controller has a relatively better tracking performance in different working conditions

Extended State Observer-Based Fuzzy Adaptive Backstepping Force Control of a Deep-Sea Hydraulic Manipulator with Long Transmission Pipelines

The force tracking control of deep-sea hydraulic manipulator systems with long transmission pipelines is disposed via fuzzy adaptive backstepping control based on an extended state observer in this paper. The pipeline model is established and then used to estimate the pressures in cylinder chambers, which are used to obtain the output force. In this process, the velocity of the piston, which is unmeasured, is needed, and an extended state observer is constructed to estimate the unmeasurable velocity signal. To cope with parameter uncertainties caused by changes in working depth, an adaptive algorithm is combined with the backstepping controller. Fuzzy logic is employed to design self-tuners that can automatically adjust the control parameters to guarantee force control performance from shallow seas to deep seas. The experimental results illustrate the success of the proposed control method. Comparative experimental results demonstrate that the extended state observer-based fuzzy adaptive backstepping controller has a relatively better tracking performance in different working conditions

Radioactivity of Natural Nuclides (40K, 238U, 232Th, 226Ra) in Coals from Eastern Yunnan, China

The naturally occurring primordial radionuclides in coals might exhibit high radioactivity, and can be exported to the surrounding environment during coal combustion. In this study, nine coal samples were collected from eastern Yunnan coal deposits, China, aiming at characterizing the overall radioactivity of some typical nuclides (i.e., 40K, 238U, 232Th, 226Ra) and assessing their ecological impact. The mean activity concentrations of 238U, 232Th, 40K and 226Ra are 63.86 (17.70–92.30 Bq· kg-1), 23.76 (11.10–37.10 Bq· kg-1), 96.84 (30.60–229.30 Bq· kg-1) and 28.09 Bq·kg-1 (3.10–61.80 Bq·kg-1), respectively. Both 238U and 232Th have high correlations with ash yield of coals, suggesting their inorganic origins. The overall environmental effect of natural radionuclides in studied coals is considered to be negligible, as assessed by related indexes (i.e., radium equivalent activity, air-adsorbed dose rate, annual effective dose, and external hazard index). However, the absorbed dose rates values are higher than the average value of global primordial radiation and the Chinese natural gamma radiation dose rate

Box Experiment Study of Thermally Enhanced SVE for Benzene

In order to describe the changes of soil temperature field, air flow field and remediation situation with time during the process of thermally enhanced SVE (soil vapor extraction), a remediation experiment of benzene contaminated soil with single extraction pipe was carried out in a box device. The results showed that the whole temperature of the system was raised to 80 °C in 4 h. 43% of benzene were removed in the first 2% of the extraction time. After 24 h, the repair efficiency was close to 100%. The device can efficiently remove benzene from soil. By continuously monitoring the parameters in the operation process of the system, the spatial distribution of temperature and soil gas pollutant concentration with time was plotted. It showed the benzene concentration distribution in the soil gas was more consistent with the temperature distribution before the start of ventilation, and the concentration of benzene in the soil gas dropped rapidly after ventilation, while the temperature distribution was almost unaffected. In the treatment of soil with a benzene content of 17.8 mg∙kg−1, when the soil gas benzene concentration is the highest at 180 min, the peak value is 11,200 mg∙m−3, and the average concentration is 7629.4 mg∙m−3

Short-term effects of CO2 leakage on the soil bacterial community in a simulated gas leakage scenario

The technology of carbon dioxide (CO2) capture and storage (CCS) has provided a new option for mitigating global anthropogenic emissions with unique advantages. However, the potential risk of gas leakage from CO2 sequestration and utilization processes has attracted considerable attention. Moreover, leakage might threaten soil ecosystems and thus cannot be ignored. In this study, a simulation experiment of leakage from CO2 geological storage was designed to investigate the short-term effects of different CO2 leakage concentration (from 400 g m−2 day−1 to 2,000 g m−2 day−1) on soil bacterial communities. A shunt device and adjustable flow meter were used to control the amount of CO2 injected into the soil. Comparisons were made between soil physicochemical properties, soil enzyme activities, and microbial community diversity before and after injecting different CO2 concentrations. Increasing CO2 concentration decreased the soil pH, and the largest variation ranged from 8.15 to 7.29 (p < 0.05). Nitrate nitrogen content varied from 1.01 to 4.03 mg/Kg, while Olsen-phosphorus and total phosphorus demonstrated less regular downtrends. The fluorescein diacetate (FDA) hydrolytic enzyme activity was inhibited by the increasing CO2 flux, with the average content varying from 22.69 to 11.25 mg/(Kg h) (p < 0.05). However, the increasing activity amplitude of the polyphenol oxidase enzyme approached 230%, while the urease activity presented a similar rising trend. Alpha diversity results showed that the Shannon index decreased from 7.66 ± 0.13 to 5.23 ± 0.35 as the soil CO2 concentration increased. The dominant phylum in the soil samples was Proteobacteria, whose proportion rose rapidly from 28.85% to 67.93%. In addition, the proportion of Acidobacteria decreased from 19.64% to 9.29% (p < 0.01). Moreover, the abundances of genera Methylophilus, Methylobacillus, and Methylovorus increased, while GP4, GP6 and GP7 decreased. Canonical correlation analysis results suggested that there was a correlation between the abundance variation of Proteobacteria, Acidobacteria, and the increasing nitrate nitrogen, urease and polyphenol oxidase enzyme activities, as well as the decreasing FDA hydrolytic enzyme activity, Olsen-phosphorus and total phosphorus contents. These results might be useful for evaluating the risk of potential CO2 leakages on soil ecosystems

Synthesis of Fe3O4@mZrO2-Re (Re = Y/La/Ce) by Using Uniform Design, Surface Response Methodology, and Orthogonal Design &amp; Its Application for As3+ and As5+ Removal

In this study, iron oxide (Fe3O4) was coated with ZrO2, and doped with three rare earth elements((Y/La/Ce), and a multi-staged rare earth doped zirconia adsorbent was prepared by using uniform design U14, Response Surface methodology, and orthogonal design, to remove As3+ and As5+ from the aqueous solution. Based on the results of TEM, EDS, XRD, FTIR, and N2-adsorption desorption test, the best molar ratio of Fe3O4:TMAOH:Zirconium butoxide:Y:La:Ce was selected as 1:12:11:1:0.02:0.08. The specific surface area and porosity was 263 m2/g, and 0.156 cm3/g, respectively. The isothermal curves and fitting equation parameters show that Langmuir model, and Redlich Peterson model fitted well. As per calculations of the Langmuir model, the highest adsorption capacities for As3+ and As5+ ions were recorded as 68.33 mg/g, 84.23 mg/g, respectively. The fitting curves and equations of the kinetic models favors the quasi second order kinetic model. Material regeneration was very effective, and even in the last cycle the regeneration capacities of both As3+ and As5+ were 75.15%, and 77.59%, respectively. Adsorption and regeneration results suggest that adsorbent has easy synthesis method, and reusable, so it can be used as a potential adsorbent for the removal of arsenic from aqueous solution