1,25-Dihydroxyvitamin D3 Attenuates Angiotensin II-Induced Renal Injury by Inhibiting Mitochondrial Dysfunction and Autophagy

Background/Aims: A recent study has shown that 1,25-dihydroxyvitamin D3 (1,25-D3), the active form of vitamin D, can ameliorate renal dysfunction. In this study, we aimed to determine the role of 1,25-D3 in angiotensin (Ang II)-induced renal injury and investigate the underlying mechanisms involved. Methods: C57BL/6J mice were treated with Ang II and/or 1,25-D3 (or saline as the control) for 2 weeks. Renal injury was evaluated using transmission electron microscopy and periodic acid-Schiff reagent and Masson’s trichrome staining. The pro-fibrotic and pro-inflammatory factors were assessed using real-time PCR. The renal apoptotic pathway was evaluated with TUNEL staining and western blot. Mitochondrial dysfunction (MtD) was determined using real-time PCR and electron microscopy. The activation of autophagy was detected using western blot. Results: In the Ang II-infused mice, expanded mesangial regions, tubulointerstitial fibrosis, and foot process fusion were observed; the levels of the pro-fibrotic and pro-inflammatory cytokines and MtD were also increased when compared with the control group. However, we found that administration of 1,25-D3 significantly improved renal function and MtD and reduced the pro-fibrotic and pro-inflammatory cytokine levels. Furthermore, 1,25-D3 significantly inhibited Ang II-induced autophagy dysfunction (determined by inhibition of Beclin-1 activation and reduction of the LC3-II/LC3-I ratio). Conclusion: Our findings suggest that 1,25-D3 may attenuate Ang II-induced renal injury by improving MtD and modulating autophagy. 1,25-D3 may be a new therapeutic for the treatment of CKD

Mapping current trends and hotspots in myasthenia gravis from 2003 to 2022: a bibliometric analysis

IntroductionResearch on myasthenia gravis (MG) has undergone rapid development in recent years. This article aimed to elucidate the characteristics of MG publications over the past 20 years and analyze emerging trends using bibliometric methods.MethodsInformation on MG articles was obtained from the Web of Science Core Collection and stored in Excel for quantitative analyses. Bibliometric analyses were performed using CiteSpace and VOSviewer to visualize publications according to countries/regions, institutions, journals, and authors.ResultsA total of 3,610 publications were included in the analysis. The USA had the highest number of publications (NP) and H-index. Among the institutions, the University of Oxford had the highest NP, followed by the University of Toronto and Duke University. Close cooperation was observed among countries and institutions. The most productive author was Renato Mantegazza, followed by Jan J. Verschuuren, and Amelia Evoli. Muscle & Nerve published the most articles on MG, followed by the Journal of Neuroimmunology and Neuromuscular Disorders. The keyword with the highest strength is “neuromuscular transmission,” followed by “safety” and “rituximab.” Co-citation analysis includes 103 publications cited at least 65 times, categorized into four clusters. Additionally, 123 keywords cited more than 40 times were analyzed and divided into five clusters.ConclusionThis bibliometric analysis shows the framework of research over the past 20 years by mapping the scholarly contributions of various countries or regions, institutions, journals, and authors in MG. The analysis also explores future trends and prospective directions, emphasizing individualized treatment based on subtypes, novel immunotherapeutic approaches, and thymectomy

Autocatalytic reduction-assisted synthesis of segmented porous PtTe nanochains for enhancing methanol oxidation reaction

Morphology engineering has been developed as one of the most widely used strategies for improving the performance of electrocatalysts. However, the harsh reaction conditions and cumbersome reaction steps during the nanomaterials synthesis still limit their industrial applications. Herein, one-dimensional (1D) novel-segmented PtTe porous nanochains (PNCs) were successfully synthesized by the template methods assisted by Pt autocatalytic reduction. The PtTe PNCs consist of consecutive mesoporous architectures that provide a large electrochemical surface area (ECSA) and abundant active sites to enhance methanol oxidation reaction (MOR). Furthermore, 1D nanostructure as a robust sustaining frame can maintain a high mass/charge transfer rate in a long-term durability test. After 2,000 cyclic voltammetry (CV) cycles, the ECSA value of PtTe PNCs remained as high as 44.47 m2·gPt–1, which was much larger than that of commercial Pt/C (3.95 m2·gPt–1). The high catalytic activity and durability of PtTe PNCs are also supported by CO stripping test and density functional theory calculation. This autocatalytic reduction-assisted synthesis provides new insights for designing efficient low-dimensional nanocatalysts

Wide‐bandwidth nanocomposite‐sensor integrated smart mask for tracking multiphase respiratory activities

Wearing masks has been a recommended protective measure due to the risks of coronavirus disease 2019 (COVID-19) even in its coming endemic phase. Therefore, deploying a “smart mask” to monitor human physiological signals is highly beneficial for personal and public health. This work presents a smart mask integrating an ultrathin nanocomposite sponge structure-based soundwave sensor (≈400 µm), which allows the high sensitivity in a wide-bandwidth dynamic pressure range, i.e., capable of detecting various respiratory sounds of breathing, speaking, and coughing. Thirty-one subjects test the smart mask in recording their respiratory activities. Machine/deep learning methods, i.e., support vector machine and convolutional neural networks, are used to recognize these activities, which show average macro-recalls of ≈95% in both individual and generalized models. With rich high-frequency (≈4000 Hz) information recorded, the two-/tri-phase coughs can be mapped while speaking words can be identified, demonstrating that the smart mask can be applicable as a daily wearable Internet of Things (IoT) device for respiratory disease identification, voice interaction tool, etc. in the future. This work bridges the technological gap between ultra-lightweight but high-frequency response sensor material fabrication, signal transduction and processing, and machining/deep learning to demonstrate a wearable device for potential applications in continual health monitoring in daily life

A PDE patch-based spectral method for progressive mesh compression and mesh denoising

The development of the patchwise partial differential equation (PDE) framework a few years ago has paved the way for the PDE method to be used in mesh signal processing. In this paper, we, for the first time, extend the use of the PDE method to progressive mesh compression and mesh denoising. We, meanwhile, upgrade the existing patchwise PDE method in patch merging, mesh partitioning, and boundary extraction to accommodate mesh signal processing. In our new method, an arbitrary mesh model is partitioned into patches, each of which can be represented by a small set of coefficients of its PDE spectral solution. Since low-frequency components contribute more to the reconstructed mesh than high-frequency ones, we can achieve progressive mesh compression and mesh denoising by manipulating the frequency terms of the PDE solution. Experimental results demonstrate the feasibility of our method in both progressive mesh compression and mesh denoising

China: Taking up the reproductive health and rights agenda

Qiqi Shen outlines the major shifts in population policy in China particularly since the Cairo International Conference on Population and Development and its acceptance of a reproductive rights health agenda. Development (2003) 46, 80–84. doi:10.1057/palgrave.development.1110451

Experimental Investigation of Local Scour Protection for Cylindrical Bridge Piers Using Anti-Scour Collars

Local scour of bridge piers is one of the main threats responsible for bridge damage. Adopting scour countermeasures to protect bridge foundations from scour has become an important issue for the design and maintenance of bridges located in erodible sediment beds. This paper focuses on the protective effect of one active countermeasure named an “anti-scour collar” on local scour around the commonly used cylindrical bridge pier. A cylindrical pier model was set up in a current flume. River sand with a median particle size of 0.324 mm was selected and used as the sediment in the basin. A live-bed scour experimental program was carried out to study the protective effect of an anti-scour collar by comparing the local scour at a cylindrical bridge pier model with and without collar. The effects of three design parameters including collar installation height, collar external diameter and collar protection range, on the scour depth and scour development were investigated parametrically. According to the experimental results, it can be concluded that: the application of an anti-scour collar alleviates the local scour at the pier effectively; and the protection effect decreases with an increase in the collar installation height, but increases with an increase in the collar external diameter and the protection range. Design suggestions for improving the scour protective effect of the anti-scour collar are summarized and of great practical guiding significance to the development of anti-scour collars for bridge piers

Preparation of N-Doped Layered Porous Carbon and Its Capacitive Deionization Performance

In this study, N-doped layered porous carbon prepared by the high-temperature solid-state method is used as electrode material. Nano calcium carbonate (CaCO3) (40 nm diameter) is used as the hard template, sucrose (C12H22O11) as the carbon source, and melamine (C3H6N6) as the nitrogen source. The materials prepared at 850 °C, 750 °C, and 650 °C are compared with YP-50F commercial super-activated carbon from Japan Kuraray Company. The electrode material at 850 °C pyrolysis temperature has a higher specific surface area and more pores suitable for ion adsorption. Due to these advantages, the salt adsorption capacity (SAC) of the N-doped layered porous carbon at 850 °C reached 12.56 mg/g at 1.2 V applied DC voltage, 500 mg/L initial solution concentration, and 15 mL/min inlet solution flow rate, which is better than the commercial super activated carbon as a comparison. In addition, it will be demonstrated that the N-doped layered porous carbon at 850 °C has a high salt adsorption capacity CDI performance than YP-50F by studying parameters with different applied voltages and flow rates as well as solution concentrations