Automatic 3D facial model and texture reconstruction from range scans

This paper presents a fully automatic approach to fitting a generic facial model to detailed range scans of human faces to reconstruct 3D facial models and textures with no manual intervention (such as specifying landmarks). A Scaling Iterative Closest Points (SICP) algorithm is introduced to compute the optimal rigid registrations between the generic model and the range scans with different sizes. And then a new template-fitting method, formulated in an optmization framework of minimizing the physically based elastic energy derived from thin shells, faithfully reconstructs the surfaces and the textures from the range scans and yields dense point correspondences across the reconstructed facial models. Finally, we demonstrate a facial expression transfer method to clone facial expressions from the generic model onto the reconstructed facial models by using the deformation transfer technique

Stability of gold nanowires at large Au-Au separations

The unusual structural stability of gold nanowires at large separations of gold atoms is explained from first-principles quantum mechanical calculations. We show that undetected light atoms, in particular hydrogen, stabilize the experimentally observed structures, which would be unstable in pure gold wires. The enhanced cohesion is due to the partial charge transfer from gold to the light atoms. This finding should resolve a long-standing controversy between theoretical predictions and experimental observations.Comment: 7 pages, 3 figure

Stress corrosion cracking in Al-Zn-Mg-Cu aluminum alloys in saline environments

Copyright 2013 ASM International. This paper was published in Metallurgical and Materials Transactions A, 44A(3), 1230 - 1253, and is made available as an electronic reprint with the permission of ASM International. One print or electronic copy may be made for personal use only. Systematic or multiple reproduction, distribution to multiple locations via electronic or other means, duplications of any material in this paper for a fee or for commercial purposes, or modification of the content of this paper are prohibited.Stress corrosion cracking of Al-Zn-Mg-Cu (AA7xxx) aluminum alloys exposed to saline environments at temperatures ranging from 293 K to 353 K (20 °C to 80 °C) has been reviewed with particular attention to the influences of alloy composition and temper, and bulk and local environmental conditions. Stress corrosion crack (SCC) growth rates at room temperature for peak- and over-aged tempers in saline environments are minimized for Al-Zn-Mg-Cu alloys containing less than ~8 wt pct Zn when Zn/Mg ratios are ranging from 2 to 3, excess magnesium levels are less than 1 wt pct, and copper content is either less than ~0.2 wt pct or ranging from 1.3 to 2 wt pct. A minimum chloride ion concentration of ~0.01 M is required for crack growth rates to exceed those in distilled water, which insures that the local solution pH in crack-tip regions can be maintained at less than 4. Crack growth rates in saline solution without other additions gradually increase with bulk chloride ion concentrations up to around 0.6 M NaCl, whereas in solutions with sufficiently low dichromate (or chromate), inhibitor additions are insensitive to the bulk chloride concentration and are typically at least double those observed without the additions. DCB specimens, fatigue pre-cracked in air before immersion in a saline environment, show an initial period with no detectible crack growth, followed by crack growth at the distilled water rate, and then transition to a higher crack growth rate typical of region 2 crack growth in the saline environment. Time spent in each stage depends on the type of pre-crack (“pop-in” vs fatigue), applied stress intensity factor, alloy chemistry, bulk environment, and, if applied, the external polarization. Apparent activation energies (E a) for SCC growth in Al-Zn-Mg-Cu alloys exposed to 0.6 M NaCl over the temperatures ranging from 293 K to 353 K (20 °C to 80 °C) for under-, peak-, and over-aged low-copper-containing alloys (~0.8 wt pct), they are typically ranging from 20 to 40 kJ/mol for under- and peak-aged alloys, and based on limited data, around 85 kJ/mol for over-aged tempers. This means that crack propagation in saline environments is most likely to occur by a hydrogen-related process for low-copper-containing Al-Zn-Mg-Cu alloys in under-, peak- and over-aged tempers, and for high-copper alloys in under- and peak-aged tempers. For over-aged high-copper-containing alloys, cracking is most probably under anodic dissolution control. Future stress corrosion studies should focus on understanding the factors that control crack initiation, and insuring that the next generation of higher performance Al-Zn-Mg-Cu alloys has similar longer crack initiation times and crack propagation rates to those of the incumbent alloys in an over-aged condition where crack rates are less than 1 mm/month at a high stress intensity factor

Magnetic pair breaking in disordered superconducting films

A theory for the effects of nonmagnetic disorder on the magnetic pair breaking rate $\alpha$ induced by paramagnetic impurities in quasi two-dimensional superconductors is presented. Within the framework of a strong-coupling theory for disordered superconductors, we find that the disorder dependence of $\alpha$ is determined by the disorder enhancements of both the electron-phonon coupling and the spin-flip scattering rate. These two effects have a tendency to cancel each other. With parameter values appropriate for Pb_{0.9} Bi_{0.1}, we find a pair breaking rate that is very weakly dependent on disorder for sheet resistances 0 < R < 2.5 kOhm, in agreement with a recent experiment by Chervenak and Valles.Comment: 6 pp., REVTeX, epsf, 2 eps figs, final version as publishe

Quasiparticle Inelastic Lifetime from Paramagnons in Disordered Superconductors

The paramagnon contribution to the quasiparticle inelastic scattering rate in disordered superconductors is presented. Using Anderson's exact eigenstate formalism, it is shown that the scattering rate is Stoner enhanced and is further enhanced by the disorder relative to the clean case in a manner similar to the disorder enhancement of the long-range Coulomb contribution. The results are discussed in connection with the possibility of conventional or unconventional superconductivity in the borocarbides. The results are compared to recent tunneling experiments on LuNi$_{2}$B$_{2}$C.Comment: 5 pages, no figure

Preliminary Evaluation of the Sural Nerve Using 22-MHz Ultrasound: A New Approach for Evaluation of Diabetic Cutaneous Neuropathy

Background: The application of 22-MHz high-frequency ultrasound allows for visualization of the inner part of the sural nerve. The aim of this study was to evaluate the morphological changes of sural nerves in patients with type 2 diabetes mellitus using ultrasound. Materials and Methods: The thickness/width (T/W) ratio, the cross-sectional area (CSA) of the sural nerves and the maximum thickness (MT) of the nerve fascicles were measured in 100 patients with type 2 diabetes mellitus and 50 healthy volunteers using 22-MHz ultrasound. Receiver operating characteristic (ROC) curves were plotted to determine the optimal cut-off values as well as the sensitivities and specificities. All parameters were significantly different between the subject and control groups. The ROC curves demonstrated that the MT was the most predictive of diabetic cutaneous neuropathy, with an optimal cut-off value of 0.365 mm that yielded a sensitivity of 90.3 % and a specificity of 87.7%. Conclusions: The results of this study suggest that 22-MHz ultrasound may be a valuable tool for evaluating diabeti

The ADAMTS (A Disintegrin and Metalloproteinase with Thrombospondin motifs) family

The ADAMTS (A Disintegrin and Metalloproteinase with Thrombospondin motifs) enzymes are secreted, multi-domain matrix-associated zinc metalloendopeptidases that have diverse roles in tissue morphogenesis and patho-physiological remodeling, in inflammation and in vascular biology. The human family includes 19 members that can be sub-grouped on the basis of their known substrates, namely the aggrecanases or proteoglycanases (ADAMTS1, 4, 5, 8, 9, 15 and 20), the procollagen N-propeptidases (ADAMTS2, 3 and 14), the cartilage oligomeric matrix protein-cleaving enzymes (ADAMTS7 and 12), the von-Willebrand Factor proteinase (ADAMTS13) and a group of orphan enzymes (ADAMTS6, 10, 16, 17, 18 and 19). Control of the structure and function of the extracellular matrix (ECM) is a central theme of the biology of the ADAMTS, as exemplified by the actions of the procollagen-N-propeptidases in collagen fibril assembly and of the aggrecanases in the cleavage or modification of ECM proteoglycans. Defects in certain family members give rise to inherited genetic disorders, while the aberrant expression or function of others is associated with arthritis, cancer and cardiovascular disease. In particular, ADAMTS4 and 5 have emerged as therapeutic targets in arthritis. Multiple ADAMTSs from different sub-groupings exert either positive or negative effects on tumorigenesis and metastasis, with both metalloproteinase-dependent and -independent actions known to occur. The basic ADAMTS structure comprises a metalloproteinase catalytic domain and a carboxy-terminal ancillary domain, the latter determining substrate specificity and the localization of the protease and its interaction partners; ancillary domains probably also have independent biological functions. Focusing primarily on the aggrecanases and proteoglycanases, this review provides a perspective on the evolution of the ADAMTS family, their links with developmental and disease mechanisms, and key questions for the future