47 research outputs found
Multi-seasonal systematic camera-trapping reveals fluctuating densities and high turnover rates of Carpathian lynx on the western edge of its native range
Camera-trapping and capture-recapture models are the most widely used tools for estimating densities of wild felids that have unique coat patterns, such as Eurasian lynx. However, studies dealing with this species are predominantly on a short-term basis and our knowledge of temporal trends and population persistence is still scarce. By using systematic camera-trapping and spatial capture-recapture models, we estimated lynx densities and evaluated density fluctuations, apparent survival, transition rate and individual's turnover during five consecutive seasons at three different sites situated in the Czech–Slovak–Polish borderland at the periphery of the Western Carpathians. Our density estimates vary between 0.26 and 1.85 lynx/100 km2 suitable habitat and represent the lowest and the highest lynx densities reported from the Carpathians. We recorded 1.5–4.1-fold changes in asynchronous fluctuated densities among all study sites and seasons. Furthermore, we detected high individual’s turnover (on average 46.3 ± 8.06% in all independent lynx and 37.6 ± 4.22% in adults) as well as low persistence of adults (only 3 out of 29 individuals detected in all seasons). The overall apparent survival rate was 0.63 ± 0.055 and overall transition rate between sites was 0.03 ± 0.019. Transition rate of males was significantly higher than in females, suggesting male-biased dispersal and female philopatry. Fluctuating densities and high turnover rates, in combination with documented lynx mortality, indicate that the population in our region faces several human-induced mortalities, such as poaching or lynx-vehicle collisions. These factors might restrict population growth and limit the dispersion of lynx to other subsequent areas, thus undermining the favourable conservation status of the Carpathian population. Moreover, our study demonstrates that long-term camera-trapping surveys are needed for evaluation of population trends and for reliable estimates of demographic parameters of wild territorial felids, and can be further used for establishing successful management and conservation measures
Seasonal variations of the digestive tract of the Eurasian beaver castor fiber.
Forage availability for wild rodents varies with season. In turn, the composition of food can affect morphometric parameters of the digestive tract. This study was performed in Eurasian beavers (Castor fiber) whose population was close to extinction in most Eurasian countries, but has now increased. Due to the previous low number of studies, information about the effect of forage availability on the digestive tract morphology has previously been lacking. This study was performed using beavers captured from the natural environment during three seasons of different forage availability: winter, summer and autumn. It was found that the diet of the beaver varied during the year; in winter it was dominated by woody material consisting of willow shoots, whereas in summer the diet was primarily herbs, grass and leaves. Season also affected the mass of digested contents of the digestive tract. The digestive content increased in the caecum and colon in winter and autumn, when poor-quality food dominated the beaver's diet. The results indicated that the digestive tract parameters of beavers varied based on the composition of available forage
A combined comparative transcriptomic, metabolomic, and anatomical analyses of two key domestication traits: Pod dehiscence and seed dormancy in pea (Pisum sp.)
The origin of the agriculture was one of the turning points in human history, and a central part of this was the evolution of new plant forms, domesticated crops. Seed dispersal and germination are two key traits which have been selected to facilitate cultivation and harvesting of crops. The objective of this study was to analyze anatomical structure of seed coat and pod, identify metabolic compounds associated with water-impermeable seed coat and differentially expressed genes involved in pea seed dormancy and pod dehiscence. Comparative anatomical, metabolomics, and transcriptomic analyses were carried out on wild dormant, dehiscent Pisum elatius (JI64, VIR320) and cultivated, indehiscent Pisum sativum non-dormant (JI92, Cameor) and recombinant inbred lines (RILs). Considerable differences were found in texture of testa surface, length of macrosclereids, and seed coat thickness. Histochemical and biochemical analyses indicated genotype related variation in composition and heterogeneity of seed coat cell walls within macrosclereids. Liquid chromatography–electrospray ionization/mass spectrometry and Laser desorption/ionization–mass spectrometry of separated seed coats revealed significantly higher contents of proanthocyanidins (dimer and trimer of gallocatechin), quercetin, and myricetin rhamnosides and hydroxylated fatty acids in dormant compared to non-dormant genotypes. Bulk Segregant Analysis coupled to high throughput RNA sequencing resulted in identification of 770 and 148 differentially expressed genes between dormant and non-dormant seeds or dehiscent and indehiscent pods, respectively. The expression of 14 selected dormancy-related genes was studied by qRT-PCR. Of these, expression pattern of four genes: porin (MACE-S082), peroxisomal membrane PEX14-like protein (MACE-S108), 4-coumarate CoA ligase (MACE-S131), and UDP-glucosyl transferase (MACE-S139) was in agreement in all four genotypes with Massive analysis of cDNA Ends (MACE) data. In case of pod dehiscence, the analysis of two candidate genes (SHATTERING and SHATTERPROOF) and three out of 20 MACE identified genes (MACE-P004, MACE-P013, MACE-P015) showed down-expression in dorsal and ventral pod suture of indehiscent genotypes. Moreover, MACE-P015, the homolog of peptidoglycan-binding domain or proline-rich extensin-like protein mapped correctly to predicted Dpo1 locus on PsLGIII. This integrated analysis of the seed coat in wild and cultivated pea provides new insight as well as raises new questions associated with domestication and seed dormancy and pod dehiscence
Asymptotic properties of the minimum contrast estimators for projections of inhomogeneous space-time shot-noise Cox processes
Stimulation of protective and cross-protective immunity against influenza B virus after adjuvant mucosal immunization of mice
Funkční povrchy na bázi LIPSS vyrobené vícepaprskovým nanostrukturováním s 2601 paprsky a měřením tepelných procesů v reálném čase
Unikátní kombinace ultrakrátkého vysokoenergetického pulzního laserového systému s výjimečnou kvalitou paprsku a uninového difrakčního optického prvku (DOE) umožňuje současnou produkci 2601 laserových stop uspořádaných do čtvercové matice 1 × 1 mm za méně než 0,01 ms. Úpravou laseru a parametrů zpracování může každá stopa obsahovat laserem indukované periodické povrchové struktury (LIPSS, vlnky), včetně LIPSS s vysokou prostorovou frekvencí (HFSL) a LIPSS s nízkou prostorovou frekvencí (LSFL). DOE umístěné před galvanometrickým skenerem umožňuje snadnou integraci a spojování vzoru na větších plochách. Kromě toho byla tvorba LIPSS poprvé monitorována pomocí rychlé infračervené radiometrie pro ověření možností kontroly kvality v reálném čase. Během výroby LIPSS byly po každém laserovém pulzu pozorovány plata tuhnutí, což umožňuje řízení procesu sledováním akumulace tepla nebo délky plat pomocí nového přístupu derivace signálu. Analýza plat tuhnutí po každém laserovém pulzu umožnila dynamickou kalibraci měření. Z měření byly pozorovány teploty akumulace tepla od 200 do 1000 °C a porovnány s teoretickým modelem. Měření teploty odhalilo zajímavé změny ve fyzice procesu laserové ablace. Navíc nejvyšší produktivita na ploše 40 × 40 mm dosáhla 1910 cm2/min, což je podle našich nejlepších znalostí nejvyšší prokázaná produktivita nanostrukturování LIPSS. Ukazuje tak velký potenciál pro účinnou výrobu funkčních povrchů na bázi LIPSS, které lze použít ke zlepšení mechanických, biologických nebo optických vlastností povrchu.A unique combination of the ultrashort high-energy pulsed laser system with exceptional beam quality and a novel Diffractive Optical Element (DOE) enables simultaneous production of 2601 spots organized in the square-shaped 1 × 1 mm matrix in less than 0.01 ms. By adjusting the laser and processing parameters each spot can contain Laser Induced Periodic Surface Structures (LIPSS, ripples), including high-spatial frequency LIPSS (HFSL) and low-spatial frequency LIPSS (LSFL). DOE placed before galvanometric scanner allows easy integration and stitching of the pattern over larger areas. In addition, the LIPSS formation was monitored for the first time using fast infrared radiometry for verification of real-time quality control possibilities. During the LIPSS fabrication, solidification plateaus were observed after each laser pulse, which enables process control by monitoring heat accumulation or plateau length using a new signal derivation approach. Analysis of solidification plateaus after each laser pulse enabled dynamic calibration of the measurement. Heat accumulation temperatures from 200 to 1000 °C were observed from measurement and compared to the theoretical model. The temperature measurements revealed interesting changes in the physics of the laser ablation process. Moreover, the highest throughput on the area of 40 × 40 mm reached 1910 cm2/min, which is the highest demonstrated throughput of LIPSS nanostructuring, to the best of our knowledge. Thus, showing great potential for the efficient production of LIPSS-based functional surfaces which can be used to improve surface mechanical, biological or optical properties