Development, characterization and evaluation of the dissolution profile of sulfasalazine suspensions

This paper reports the development, characterization and in vitrodissolution behavior of sulfasalazine suspensions for treatment of chronic intestinal inflammatory diseases. Three formulations were developed, from powdered sulfasalazine obtained from different suppliers. The sulfasalazine was characterized regarding concentration, Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), X-Ray Diffraction (XRD), particle size distribution, polydispersion and solubility. The suspensions were developed and characterized regarding pH, viscosity, density, particle size, sedimentation volume, concentration and dissolution. The pH values were slightly acidic. The method of preparing the suspensions reduced the particle sizes and made the size distribution more homogeneous. The dissolution studies showed that the sulfasalazine suspensions had low solubility in acidic media, but dissolve quickly, reaching levels of 85%, in neutral media or media containing 0.5% of surfactants such as polysorbate 80. Besides this, the sulfasalazine suspensions were classified as having immediate dissolution because they reached dissolution levels near 100% in 20 minutes.</p

Atividade biológica de extratos acetato de etila, etanólico e aquoso de timbó (Lonchocarpus floribundus) sobre carrapato bovino

Os extratos acetato de etila, etanólico e aquoso de raízes de Lonchocarpus floribundus foram utilizados, a fim de avaliar a atividade biológica sobre carrapato bovino. Carrapatos adultos foram coletados em bovinos infestados artificialmente, separados em grupos de dez indivíduos, pesados e imersos, separadamente, nos extratos de raízes de L. Floribundus, nas concentrações de 5, 25, 50, 75 e 100 mg mL-1. Para a avaliação em larvas, foram utilizados indivíduos de 14 a 21 dias, os quais foram imersos nos extratos nas concentrações de 1, 5, 10, 15 e 20 mg mL-1. Após o tratamento, cada grupo foi colocado em placa de Petri e incubado a 27 ± 1 ºC e umidade relativa de 80 ± 5%. Os extratos avaliados não foram eficazes para induzir, acima de 50%, a mortalidade de fêmeas ingurgitadas. Os extratos acetato de etila e etanólico induziram 100% de mortalidade de larvas. Entretanto, quanto aos valores de concentração letal mediana (CL50), o extrato etanólico (CL50 = 2,1 mg mL-1) foi mais tóxico que o extrato acetato de etila (CL50 = 4,1 mg mL-1). O extrato etanólico estimou concentração inibitória mediana (CI50) de 3,0 mg mL-1 e foi mais tóxico que os demais extratos quanto a este parâmetro de avaliação. Entre os três extratos avaliados, os extratos acetato de etila e etanólico apresentaram os melhores resultados quanto ao controle de reprodução de R. (B.) microplus, atingindo 100% na concentração de 5 mg mL-1. Os extratos de raízes de L. Floribundus apresentaram atividade biológica sobre carrapato bovino

Rational use of antioxidants in solid oral pharmaceutical preparations

Antioxidants are currently used as efficient excipients that delay or inhibit the oxidation process of molecules. Excipients are often associated with adverse reactions. Stability studies can guide the search for solutions that minimize or delay the processes of degradation. The ability to predict oxidation reactions in different drugs is important. Methods: This study was conducted to assess the rational use of butylated hydroxyanisole (BHA), butylated hydroxytoluene (BHT), sodium metabisulfite (SMB), propyl gallate (PG) and cysteine (CYS) in tablet formulations of simvastatin and ketoconazole. These antioxidants were evaluated according to stability parameters and the relationship between efficiency of the antioxidant and chemical structure of the drugs. Results were compared with DPPH tests and computational simulations. BHT was most efficient regarding simvastatin stability, and the most effective BHT concentrations for maintaining stability were 0.5 and 0.1%. In relation to ketoconazole, SMB was most efficient for maintaining content and dissolution profile. The evaluation by DPPH showed that the largest percentage of absorbance reduction was observed for PG, while SMB proved most efficient and had lower consumption of DPPH. The same pattern was observed, albeit with lower efficiency, for the other lipophilic antioxidants such as BHT and BHA. The results of the molecular modeling study demonstrated that electronic properties obtained were correlated with antioxidant activity in solution, being useful for the rational development of liquid pharmaceutical formulations but not for solid oral formulations. This study demonstrated the importance of considering stability parameters and molecular modeling to elucidate the chemical phenomena involved in antioxidant activity, being useful for the rational use of antioxidants in the development of pharmaceutical formulations.Atualmente, antioxidantes são usados como excipientes eficientes, que retardam ou inibem o processo de oxidação de moléculas. Excipientes são frequentemente associados a efeitos adversos. Estudos de estabilidade podem ajudar na busca por possíveis soluções para minimizar ou retardar os processos de degradação. A habilidade de prever as reações de oxidação em diferentes fármacos é importante. O estudo foi conduzido com o objetivo de avaliar o uso racional de hidroxianisol butilado (BHA), hidroxitolueno butilado (BHT), metabissulfito sódico (SMB), galato de propila (PG) e cisteína (CYS) em formulações de comprimidos de sinvastatina e cetoconazol. Eles foram avaliados por parâmetros de estabilidade e pela relação entre a eficiência dos antioxidantes e a estrutura química do fármaco. Os resultados foram comparados com testes de DPPH e simulações em computador. BHT foi mais eficiente com relação a estabilidade da sinvastatina e às concentrações mais eficientes para manutenção de estabilidade foram 0,5 e 0,1%. Com relação ao cetoconazol, SMB foi mais eficiente em manter o conteúdo e o perfil de dissolução. A avaliação por DPPH mostrou que o maior percentual de redução de absorção foi observado para PG, enquanto que SMB mostrou ser mais eficiente e consumir menos DPPH. A mesma tendência foi observada com menos eficiência em todos os outros antioxidantes lipofílicos como o BHT e BHA. Os resultados do estudo de modelagem molecular demonstraram que as propriedades eletrônicas obtidas podem ser correlacionadas com a atividade antioxidante em solução, sendo útil para o desenvolvimento racional de formulações farmacêuticas líquidas, mas não para formulações sólidas orais. Este estudo demonstrou a importância de considerar parâmetros de estabilidade e modelagem molecular para elucidar os fenômenos químicos envolvidos na atividade antioxidante, sendo úteis para o uso racional de antioxidantes no desenvolvimento de formulações farmacêuticas

Spouted bed drying of Bauhinia forficata link extract: the effects of feed atomizer position and operating conditions on equipment performance and product properties

In this paper the effects of feed atomizer position and operating conditions on equipment performance (accumulation rate, product recovery, elutriation and thermal efficiency) and product properties (moisture content, size distribution, flavonoid degradation and flow properties) during spouted bed drying of Bauhinia forficata Link extract are evaluated. The parameters studied were the position of the atomizer system (top spray or bottom spray), the inlet temperature of the spouting gas (80 and 150oC) and the feed mass flow rate of concentrated extract relative to the evaporation capacity of the dryer, Ws/Wmax (15 to 100%). Higher accumulation rate values were obtained with the atomizer placed at the bottom of the bed. In this configuration, the accumulation rate increases with the increase in the Ws/Wmax ratio. The best drying performance was obtained for the top spray configuration

Diminishing benefits of urban living for children and adolescents’ growth and development

Optimal growth and development in childhood and adolescence is crucial for lifelong health and well-being1–6. Here we used data from 2,325 population-based studies, with measurements of height and weight from 71 million participants, to report the height and body-mass index (BMI) of children and adolescents aged 5–19 years on the basis of rural and urban place of residence in 200 countries and territories from 1990 to 2020. In 1990, children and adolescents residing in cities were taller than their rural counterparts in all but a few high-income countries. By 2020, the urban height advantage became smaller in most countries, and in many high-income western countries it reversed into a small urban-based disadvantage. The exception was for boys in most countries in sub-Saharan Africa and in some countries in Oceania, south Asia and the region of central Asia, Middle East and north Africa. In these countries, successive cohorts of boys from rural places either did not gain height or possibly became shorter, and hence fell further behind their urban peers. The difference between the age-standardized mean BMI of children in urban and rural areas was &amp;lt;1.1 kg m–2 in the vast majority of countries. Within this small range, BMI increased slightly more in cities than in rural areas, except in south Asia, sub-Saharan Africa and some countries in central and eastern Europe. Our results show that in much of the world, the growth and developmental advantages of living in cities have diminished in the twenty-first century, whereas in much of sub-Saharan Africa they have amplified. © 2023, The Author(s)