7,101 research outputs found
Computer programs calculate potential and charge distributions in a plasma
Computer program determines the potential and charge distributions between two electrodes in a plasma. Solutions of the Vlasov equations for plane, cylindrical, and spherical geometries are determined and density distributions are found for each of these configurations over a range of conditions
Study of casing treatment stall margin improvement phenomena
The results of a program of experimental and analytical research in casing treatments over axial compressor rotor blade tips are presented. Circumferential groove, axial-skewed slot, and blade angle slot treatments were tested. These yielded, for reduction in stalling flow and loss in peak efficiency, 5.8% and 0 points, 15.3% and 2.0 points, and 15.0% and 1.2 points, respectively. These values are consistent with other experience. The favorable stalling flow situations correlated well with observations of higher-then-normal surface pressures on the rotor blade pressure surfaces in the tip region, and with increased maximum diffusions on the suction surfaces. Annular wall pressure gradients, especially in the 50-75% chord region, are also increased and blade surface pressure loadings are shifted toward the trailing edge for treated configurations. Rotor blade wakes may be somewhat thinner in the presence of good treatments, particularly under operating conditions close to the baseline stall
Evaluation of range and distortion tolerance for high Mach number transonic fan stages. Task 2: Performance of a 1500-foot-per-second tip speed transonic fan stage with variable geometry inlet guide vanes and stator
A 0.5 hub/tip radius ratio compressor stage consisting of a 1500 ft/sec tip speed rotor, a variable camber inlet guide vane and a variable stagger stator was designed and tested with undistorted inlet flow, flow with tip radial distortion, and flow with 90 degrees, one-per-rev, circumferential distortion. At the design speed and design IGV and stator setting the design stage pressure ratio was achieved at a weight within 1% of the design flow. Analytical results on rotor tip shock structure, deviation angle and part-span shroud losses at different operating conditions are presented. The variable geometry blading enabled efficient operation with adequate stall margin at the design condition and at 70% speed. Closing the inlet guide vanes to 40 degrees changed the speed-versus-weight flow relationship along the stall line and thus provided the flexibility of operation at off-design conditions. Inlet flow distortion caused considerable losses in peak efficiency, efficiency on a constant throttle line through design pressure ratio at design speed, stall pressure ratio, and stall margin at the 0 degrees IGV setting and high rotative speeds. The use of the 40 degrees inlet guide vane setting enabled partial recovery of the stall margin over the standard constant throttle line
Evaluation of hydrogen fuel in a full-scale afterburner
Combustion efficiency of hydrogen fuel for varying afterburner configuration
Discovery of Pulsed X-ray Emission from the SMC Transient RX J0117.6-7330
We report on the detection of pulsed, broad-band, X-ray emission from the
transient source RX J0117.6-7330. The pulse period of 22 seconds is detected by
the ROSAT/PSPC instrument in a 1992 Sep 30 - Oct 2 observation and by the
CGRO/BATSE instrument during the same epoch. Hard X-ray pulsations are
detectable by BATSE for approximately 100 days surrounding the ROSAT
observation (1992 Aug 28 - Dec 8). The total directly measured X-ray luminosity
during the ROSAT observation is 1.0E38 (d/60 kpc)^2 ergs s-1. The pulse
frequency increases rapidly during the outburst, with a peak spin-up rate of
1.2E-10 Hz s-1 and a total frequency change 1.8%. The pulsed percentage is
11.3% from 0.1-2.5 keV, increasing to at least 78% in the 20-70 keV band. These
results establish RX J0117.6-7330 as a transient Be binary system.Comment: 17 pages, Latex, aasms, accepted for publication in ApJ Letter
Engineering verification of the biomass production chamber
The requirements for life support systems, both biological and physical-chemical, for long-term human attended space missions are under serious study throughout NASA. The KSC 'breadboard' project has focused on biomass production using higher plants for atmospheric regeneration and food production in a special biomass production chamber. This chamber is designed to provide information on food crop growth rate, contaminants in the chamber that alter plant growth requirements for atmospheric regeneration, carbon dioxide consumption, oxygen production, and water utilization. The shape and size, mass, and energy requirements in relation to the overall integrity of the biomass production chamber are under constant study
Three New Long Period X-ray Pulsars Discovered in the Small Magellanic Cloud
The Small Magellanic Cloud is increasingly an invaluable laboratory for
studying accreting and isolated X-ray pulsars. We add to the class of compact
SMC objects by reporting the discovery of three new long period X-ray pulsars
detected with the {\it Chandra X-ray Observatory}. The pulsars, with periods of
152, 304 and 565 seconds, all show hard X-ray spectra over the range from 0.6 -
7.5 keV. The source positions of the three pulsars are consistent with known
H-alpha emission sources, indicating they are likely to be Be type X-ray binary
star systems.Comment: Accepted for publication in the Astrophysical Journa
Computer solutions of the vlasov equations final report, jun. 1, 1963 - nov. 30, 1964
Computer programs for solutions of Vlasov equations for plane, cylindrical, and spherical geometr
Discovery of 16.6 and 25.5 s Pulsations from the Small Magellanic Cloud
We report the serendipitous detection of two previously unreported pulsars
from the direction of the Small Magellanic Cloud, with periods of 16.6 and 25.5
seconds. The detections are based on archival PCA data from the Rossi X-ray
Timing Explorer (RXTE). The observation leading to these detections occurred in
September 2000 extending over 2.1 days with an exposure of 121 ks. A possible
identification of the 16.6 s pulsar with an X-ray source RX J0051.8-7310 seen
by both ROSAT and ASCA imaging X-ray satellites is presented.Comment: 9 pages with 3 figures. Submitted to ApJ Letter
EXIST: The Ultimate Spatial/Temporal Hard X-ray Survey
The Energetic X-ray Imaging Survey Telescope (EXIST) is a proposed mission to conduct an all-sky imaging hard x-ray (HX) survey (~5–600 keV) with ~0.05mCrab sensitivity (5σ; 6mo.; ~5–100keV) comparable to the ROSAT soft x-ray survey, and to provide the maximum sensitivity and resolution (spatial and temporal) HX imager as the Next Generation GRB mission. Its primary science goals are to i) identify and measure obscured AGN and constrain the accretion luminosity of the universe as well as the cosmic IR background from Blazar spectra coincident with GeV-TeV observations, ii) measure spectra, variability and locations for the faintest GRBs to study the most energetic events in the universe and the earliest epoch of star formation, and iii) study black holes on all scales, from x-ray transients to luminous AGN. EXIST would incorporate a very large area (~8m^2) imaging Cd-Zn-Te detector and coded aperture telescope array with nearly half-sky instantaneous view which images the full sky each orbit. With fixed zenith pointing, it could be mounted on the ISS or a free flyer and would complement both GLAST and Constellation-X science if launched before 2010, as recommended by the Astronomy and Astrophysics Decadal Survey
- …