Alloy Solute Interactions at Grain Boundaries and Nanoscale Interfaces in Copper

To study grain boundary solute interactions we have developed recipes for co-electrodeposition of dilute copper alloys including Cu(Ni) and Cu(Co). Secondary Ion Mass Spectrometry (SIMS) was used to analyze the incorporation of solute into the copper film. In addition to the co-electrodeposition process we also used a drive-in diffusion model for Au, Ag, Co, and Ni. Atomic imaging in a scanning transmission electron microscope (STEM) was used to visualize and investigate solute at grain boundaries and interfaces in polygranular copper films. By understanding these interactions and pathways of alloying solutes in copper microstructures, we can more accurately predict alloying behavior and how they inhibit or promote grain boundary diffusion. Understanding how these alloys interact with grain boundary diffusion pathways and interfaces will, in turn, enable grain boundary and interface engineering solutions to obstacles faced by semiconductor manufacturers as more aggressive feature sizes are pursued

Bush the transnationalist: a reappraisal of the unilateralist impulse in US foreign policy, 2001-2009

This article challenges the common characterisation of George W. Bush’s foreign policy as “unilateral.” It argues that the Bush administration developed a new post-9/11 understanding of terrorism as a transnational, networked phenomenon shaped by the forces of globalisation. This led to a new strategic emphasis on bi- and multilateral security co-operation and counterterrorism operations, especially outside of Afghanistan and Iraq, driven by the perceived need to counter a transnational security challenge present in multiple locations. This (flawed) attempt to engage with transnational security challenges supplemented the existing internationalist pillar of the Bush administration’s foreign policy. Highlighting the transnational realm of international relations and the ways in which the Bush administration was able to co-opt other states to tackle perceived transnational challenges also shows the high importance the administration attached to concerted action even as it frequented eschewed institutional multilateralism

A Preliminary Investigation Into the Use of Diethylenetriaminepentaacetic Acid (DTPA), and Ethylenediaminetetraacetic Acid (EDTA) to Treat Foxing of Paper Objects.

Foxing is a general term used to describe a type of localized, brown staining that may be caused by a range of deterioration agents active in paper objects. This research focuses on foxing caused by iron ions, a powerful catalyst for oxidative cellulose degradation that is highly destructive to paper objects. Iron-induced foxing may become a serious issue during a disaster situation when increased moisture levels are encountered. Such environmental conditions may accelerate oxidation reactions within paper objects, resulting in a decrease in the structural integrity of cellulose and increased staining of an object. The severity of iron catalyzed oxidation of cellulose and the ensuing aesthetic disruption are aspects of deterioration that should be addressed with conservation treatment. Chelating agents have been used to treat cellulose degradation caused by iron ions. In this work, a preliminary assessment of the effectiveness and practicality of chelating agents for interventive treatment of works of art on paper was conducted. Past uses of chelating agents in paper conservation were reviewed. Synthesized iron foxed samples were tested with diethylenetriaminepentaacetic acid (DTPA), ethylenediaminetetraacetic acid (EDTA), and each chelate in combination with sodium dithionite reducing agent. The samples were analyzed under visible light ultraviolet fluorescence (280-440 nm), and optical microscopy using a Leica s6D microscope and an Olympus DP70 digital microscope with an Olympus U-RFL-T burner. A Spectro X-Lab 2000 x-ray fluorescence was used to measure iron ion levels before treatment, after treatment with chelators and sodium dithionite, and after washing in deionized water. Selected samples were further examined after testing was completed using an FEI Quanta 200 scanning electron microscope (SEM) with an Oxford Instruments INCA X-sight LN2 energy dispersive x-ray spectroscopy (EDS) and Si(Li) X-ray detector, 10mm ATW2 with a special energy resolution of 5.9 keV:133eV to investigate the physical properties of the paper fibers and iron residues after treatment. Sample brightness was measured before and after treatment using a CM-2600d spectrophotometer by Konica Minolta. After lengthy and invasive treatment procedures, DTPA and EDTA successfully reduced levels of iron ions and visible staining in the paper samples. Foxing staining was decreased when treated with the chelates in combination with sodium dithionite. EDTA showed better results for reduction of iron ions and foxing than DTPA. An increase of paper brightness was noted after treatment; and ultraviolet fluorescence revealed signs of chemical changes in the samples after treatment including formation of tidelines and fluorescence of samples treated with EDTA. SEM/EDS and optical microscopy revealed physical changes in the paper supports after treatment related to the treatment methods tested. This study provides additional insight into the risks and benefits of some chelating agent treatments used in paper conservation

Sky Prestowitz, DO 2020

Philadelphia DO Class of 2020 portrait.https://digitalcommons.pcom.edu/portraits_2020/1193/thumbnail.jp

Trading Places: How We Allowed Japan To Take The Lead

https://works.swarthmore.edu/alum-books/2331/thumbnail.jp

Three Billion New Capitalists: The Great Shift Of Wealth And Power To The East

https://works.swarthmore.edu/alum-books/2329/thumbnail.jp