Histamine release after intravenous application of short-acting hypnotics. A comparison of etomidate, Althesin (CT1341) and propanidid

The subject of histamine release was investigated in 16 volunteers by means of plasma histamine determination after the administration of etornidate, Althesin, propanidid, and Cremophor EL. Althesin and propanidid caused release of histamine in various degrees of frequency. Blood pressure changes were rather pronounced with both anaesthetic agents; tachycardia reached its maximum in the first and second minute, which seems to be an argument against histamine release as the underlying cause of this reaction. Histamine was, indeed, only released to such an extent (with the exception of one borderline case) that no clinical symptoms other than secretion of gastric juice and erythema were to be expected. After the application of etomidate and Cremophor EL an increase in plasma histamine was not detectable. Changes in the differential blood picture in terms of a decrease in basophils only occurred after Althesin and propanidid; not, however, after etomidate and Cremophor EL. Etomidate is, therefore, the first hypnotic drug for intravenous application which is unlikely to cause chemical histamine release

Electronic tuneability of a structurally rigid surface intermetallic and Kondo lattice: CePt5_5 / Pt(111)

We present an extensive study of structure, composition, electronic and magnetic properties of Ce--Pt surface intermetallic phases on Pt(111) as a function of their thickness. The sequence of structural phases appearing in low energy electron diffraction (LEED) may invariably be attributed to a single underlying intermetallic atomic lattice. Findings from both microscopic and spectroscopic methods, respectively, prove compatible with CePt$_5$ formation when their characteristic probing depth is adequately taken into account. The intermetallic film thickness serves as an effective tuning parameter which brings about characteristic variations of the Cerium valence and related properties. Soft x-ray absorption (XAS) and magnetic circular dichroism (XMCD) prove well suited to trace the changing Ce valence and to assess relevant aspects of Kondo physics in the CePt$_5$ surface intermetallic. We find characteristic Kondo scales of the order of 10$^2$ K and evidence for considerable magnetic Kondo screening of the local Ce $4f$ moments. CePt$_5$/Pt(111) and related systems therefore appear to be promising candidates for further studies of low-dimensional Kondo lattices at surfaces.Comment: 14 pages, 11 figure

Low Levels of Hemoglobin at Admission Are Associated With Increased 30-Day Mortality in Patients With Hip Fracture

INTRODUCTION: Previous smaller studies suggest that anemia is a risk factor for mortality in patients with hip fracture. The purpose of this investigation was to assess the correlation between hemoglobin at admission with 30-day mortality following a hip fracture in a large-scale study. PATIENTS AND METHODS: From January 1996 to December 2012, all patients with hip fracture (>60 years of age) admitted to Bispebjerg Hospital, Copenhagen, were identified from a local hip fracture database. We excluded conservatively treated patients and patients who died preoperatively. RESULTS: Seven thousand four hundred twenty-one consecutive patients with hip fracture were identified. Of those 7319 had a hemoglobin measurement on admission and were thus eligible for further analysis. Mean hemoglobin for patients alive at 30 days was 7.6 (standard deviation [SD]: 1.0) and for deceased patients 7.4 (SD: 1.1), P < .0001. Mean age was 82.6 years (SD: 8.5), and 76.5% of the population were female (N(females) = 5600). The 30-day mortality decreases for every increase in hemoglobin of 1.0 mmol/L in a univariate analysis (P < .0001). The hazard ratio (HR) with 95% confidence interval (CI) for 30-day mortality in patients with anemia (<7.3 mmol/L for females and <8.3 mmol/L for males; N(anemic) = 3235) was 1.66 (CI: 1.43-1.91, P < .0001). Adjusting for age, type of fracture, gender, and comorbidities (Charlson score) slightly attenuated the risk estimate (HR: 1.21, CI: 1.03-1.41, P = .02). CONCLUSION: This study demonstrates increased 30-day mortality in patients with low hemoglobin at admission, even after adjusting for comorbidities

Organic contaminants in bio-based fertilizer treated soil:Target and suspect screening approaches

Using bio-based fertilizer (BBF) in agricultural soil can reduce the dependency on chemical fertilizer and increase sustainability by recycling nutrient-rich side-streams. However, organic contaminants in BBFs may lead to residues in the treated soil. This study assessed the presence of organic contaminants in BBF treated soils, which is essential for evaluating sustainability/risks of BBF use. Soil samples from two field studies amended with 15 BBFs from various sources (agricultural, poultry, veterinary, and sludge) were analyzed. A combination of QuEChERS-based extraction, liquid chromatography quadrupole time of flight mass spectrometry-based (LC-QTOF-MS) quantitative analysis, and an advanced, automated data interpretation workflow was optimized to extract and analyze organic contaminants in BBF-treated agricultural soil. The comprehensive screening of organic contaminants was performed using target analysis and suspect screening. Of the 35 target contaminants, only three contaminants were detected in the BBF-treated soil with concentrations ranging from 0.4 ng g -1 to 28.7 ng g -1; out of these three detected contaminants, two were also present in the control soil sample. Suspect screening using patRoon (an R-based open-source software platform) workflows and the NORMAN Priority List resulted in tentative identification of 20 compounds (at level 2 and level 3 confidence level), primarily pharmaceuticals and industrial chemicals, with only one overlapping compound in two experimental sites. The contamination profiles of the soil treated with BBFs sourced from veterinary and sludge were similar, with common pharmaceutical features identified. The suspect screening results suggest that the contaminants found in BBF-treated soil might come from alternative sources other than BBFs

Simultaneous detection of pesticides and pharmaceuticals in three types of bio-based fertilizers by an improved QuEChERS method coupled with UHPLC-q-ToF-MS/MS

Bio-based fertilizers (BBFs) have the potential to contain both pesticides and pharmaceutical residues, which may pose a threat to soils, crops, and human health. However, no analytical screening method is available currently to simultaneously analyze a wide range of contaminants in the complex origin-dependent matrices of BBFs. To fill this gap, our study tested and improved an original QuEChERS method (OQM) for simultaneously analyzing 78 pesticides and 18 pharmaceuticals in BBFs of animal, plant, and ashed sewage sludge origin. In spiked recovery experiments, 34-58 pharmaceuticals and pesticides were well recovered (recovery of 70-120%) via OQM at spiking concentrations levels of 10 ng/g and 50 ng/g in these three different types of BBFs. To improve the extraction efficiency further, ultrasonication and end-over-end rotation were added based on OQM, resulting in the improved QuEChERS method (IQM) that could recover 57-79 pesticides and pharmaceuticals, in the range of 70-120%. The detection limits of this method were of 0.16-4.32/0.48-12.97 ng/g, 0.03-11.02/0.10-33.06 ng/g, and 0.06-5.18/0.18-15.54 ng/g for animal, plant, and ash-based BBF, respectively. Finally, the IQM was employed to screen 15 BBF samples of various origins. 15 BBFs contained at least one pesticide or pharmaceutical with ibuprofen being frequently detected in at concentration levels of 4.1-181 ng/g. No compounds were detected in ash-based BBFs

Computational micromagnetics with Commics

We present our open-source Python module Commics for the study of the magnetization dynamics in ferromagnetic materials via micromagnetic simulations. It implements state-of-the-art unconditionally convergent finite element methods for the numerical integration of the Landau–Lifshitz–Gilbert equation. The implementation is based on the multiphysics finite element software Netgen/NGSolve. The simulation scripts are written in Python, which leads to very readable code and direct access to extensive post-processing. Together with documentation and example scripts, the code is freely available on GitLab. Program summary: Program title: Commics Program Files doi: http://dx.doi.org/10.17632/29wv9h78h7.1 Licensing provisions: GPLv3 Programming language: Python3 Nature of problem: Numerical integration of the Landau–Lifshitz–Gilbert equation in three space dimensions Solution method: Tangent plane scheme [1]: original first-order version, projection-free version, second-order version, efficient second-order IMEX version; Midpoint scheme [2]: original version, IMEX version; Magnetostatic Maxwell equations are treated by the hybrid FEM–BEM method [3] Additional comments including restrictions and unusual features: An installation of the finite element software Netgen/NGSolve and an installation of the boundary element library BEM++ are required. References [1] F. Alouges. A new finite element scheme for Landau–Lifchitz equations. Discrete Contin. Dyn. Syst. Ser. S, 1(2):187–196, 2008. [2] S. Bartels and A. Prohl. Convergence of an implicit finite element method for the Landau–Lifshitz–Gilbert equation. SIAM J. Numer. Anal., 44(4):1405–1419, 2006. [3] D. R. Fredkin and T. R. Koehler. Hybrid method for computing demagnetization fields. IEEE Trans. Magn., 26(2):415–417, 1990