938 research outputs found
Low-Temperature Solution-Processed Electron Transport Layers for Inverted Polymer Solar Cells
© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, WeinheimProcessing temperature is highlighted as a convenient means of controlling the optical and charge transport properties of solution processed electron transport layers (ETLs) in inverted polymer solar cells. Using the well-studied active layer – poly(3-hexylthiophene-2,5-diyl):indene-C60 bisadduct – the influence of ETL processing temperatures from 25 to 450 °C is shown, reporting the role of crystallinity, structure, charge transport, and Fermi level (EF) on numerous device performance characteristics. It has been determined that an exceptionally low temperature processed ETL (110 °C) increases device power conversion efficiency by a factor greater than 50% compared with a high temperature (450 °C) processed ETL. Modulations in device series and shunt resistance, induced by changes in the ETL transport properties, are observed in parallel to significant changes in device open circuit voltage attributed to changes on the EF of the ETLs. This work highlights the importance of interlayer control in multilayer photovoltaic devices and presents a convenient material compatible with future flexible and roll-to-roll processes
The Johnson-Segalman model with a diffusion term in Couette flow
We study the Johnson-Segalman (JS) model as a paradigm for some complex
fluids which are observed to phase separate, or ``shear-band'' in flow. We
analyze the behavior of this model in cylindrical Couette flow and demonstrate
the history dependence inherent in the local JS model. We add a simple gradient
term to the stress dynamics and demonstrate how this term breaks the degeneracy
of the local model and prescribes a much smaller (discrete, rather than
continuous) set of banded steady state solutions. We investigate some of the
effects of the curvature of Couette flow on the observable steady state
behavior and kinetics, and discuss some of the implications for metastability.Comment: 14 pp, to be published in Journal of Rheolog
The Safety, Effectiveness and Concentrations of Adjusted Lopinavir/Ritonavir in HIV-Infected Adults on Rifampicin-Based Antitubercular Therapy
Rifampicin co-administration dramatically reduces plasma lopinavir concentrations. Studies in healthy volunteers and HIV-infected patients showed that doubling the dose of lopinavir/ritonavir (LPV/r) or adding additional ritonavir offsets this interaction. However, high rates of hepatotoxicity were observed in healthy volunteers. We evaluated the safety, effectiveness and pre-dose concentrations of adjusted doses of LPV/r in HIV infected adults treated with rifampicin-based tuberculosis treatment.Adult patients on a LPV/r-based antiretroviral regimen and rifampicin-based tuberculosis therapy were enrolled. Doubled doses of LPV/r or an additional 300 mg of ritonavir were used to overcome the inducing effect of rifampicin. Steady-state lopinavir pre-dose concentrations were evaluated every second month.18 patients were enrolled with a total of 79 patient months of observation. 11/18 patients were followed up until tuberculosis treatment completion. During tuberculosis treatment, the median (IQR) pre-dose lopinavir concentration was 6.8 (1.1-9.2) mg/L and 36/47 (77%) were above the recommended trough concentration of 1 mg/L. Treatment was generally well tolerated with no grade 3 or 4 toxicity: 8 patients developed grade 1 or 2 transaminase elevation, 1 patient defaulted additional ritonavir due to nausea and 1 patient developed diarrhea requiring dose reduction. Viral loads after tuberculosis treatment were available for 11 patients and 10 were undetectable.Once established on treatment, adjusted doses of LPV/r co-administered with rifampicin-based tuberculosis treatment were tolerated and LPV pre-dose concentrations were adequate
Los hombres negros
Autor tomado de prólogo.Port. a dos tintas.Copia digital : Junta de Castilla y León. ConsejerÃa de Cultura y Turismo, 201
Understanding the core density profile in TCV H-mode plasmas
Results from a database analysis of H-mode electron density profiles on the
Tokamak \`a Configuration Variable (TCV) in stationary conditions show that the
logarithmic electron density gradient increases with collisionality. By
contrast, usual observations of H-modes showed that the electron density
profiles tend to flatten with increasing collisionality. In this work it is
reinforced that the role of collisionality alone, depending on the parameter
regime, can be rather weak and in these, dominantly electron heated TCV cases,
the electron density gradient is tailored by the underlying turbulence regime,
which is mostly determined by the ratio of the electron to ion temperature and
that of their gradients. Additionally, mostly in ohmic plasmas, the Ware-pinch
can significantly contribute to the density peaking. Qualitative agreement
between the predicted density peaking by quasi-linear gyrokinetic simulations
and the experimental results is found. Quantitative comparison would
necessitate ion temperature measurements, which are lacking in the considered
experimental dataset. However, the simulation results show that it is the
combination of several effects that influences the density peaking in TCV
H-mode plasmas.Comment: 23 pages, 12 figure
Recommended from our members
A monolithically integrated silicon modulator with a 10 Gb/s 5 V pp or 5.6 V pp driver in 0.25 μm SiGe:C BiCMOS
This paper presents as a novelty a fully monolithically integrated 10 Gb/s silicon modulator consisting of an electrical driver plus optical phase modulator in 0.25 μm SiGe:C BiCMOS technology on one chip, where instead of a SOI CMOS process (only MOS transistors) a SiGe BiCMOS process (MOS transistors and fast SiGe bipolar transistors) is implemented. The fastest bipolar transistors in the BiCMOS product line used have a transit frequency of f t ≈ 120 GHz and a collector-emitter breakdown voltage of BV CE0 = 2.2 V (IHP SG25H3). The main focus of this paper will be given to the electronic drivers, where two driver variants are implemented in the test chips. Circuit descriptions and simulations, which treat the influences of noise and bond wires, are presented. Measurements at separate test chips for the drivers show that the integrated driver variant one has a low power consumption in the range of 0.66 to 0.68 W but a high gain of S 21 = 37 dB. From the large signal point of view this driver delivers an inverted as well as a non-inverted output data signal between 0 and 2.5 V (5 V pp differential). Driver variant one is supplied with 2.5 V and with 3.5 V. Bit-error-ratio (BER) measurements resulted in a BER better than 10 −12 for voltage differences of the input data stream down to 50 mV pp . Driver variant two, which is an adapted version of driver variant one, is supplied with 2.5 and 4.2 V, consumes 0.83 to 0.87 W, delivers a differential data signal with 5.6 V pp at the output and has a gain of S 21 = 40 dB. The chip of the fully integrated modulator occupies an area of 12.3 mm 2 due to the photonic components. Measurements with a 240 mV pp electrical input data stream, 1.25 V input common-mode voltage and for an optical input wavelength of 1540 nm resulted in an extinction ratio of 3.3 dB for 1 mm long RF phase shifters in each modulator arm driven by driver variant one and a DC tuning voltage of 1.2 V. The extinction ratio was 8.4 dB at a DC tuning voltage of 7 V for a device with 2 mm long RF phase shifters in each arm and driver variant two
Coexistence and Phase Separation in Sheared Complex Fluids
We demonstrate how to construct dynamic phase diagrams for complex fluids
that undergo transitions under flow, in which the conserved composition
variable and the broken-symmetry order parameter (nematic, smectic,
crystalline, etc.) are coupled to shear rate. Our construction relies on a
selection criterion, the existence of a steady interface connecting two stable
homogeneous states. We use the (generalized) Doi model of lyotropic nematic
liquid crystals as a model system, but the method can be easily applied to
other systems, provided non-local effects are included.Comment: 4 pages REVTEX, 5 figures using epsf macros. To appear in Physical
Review E (Rapid Communications
- …