1,185 research outputs found

    Loss mechanisms of surface plasmon polaritons on gold probed by cathodoluminescence imaging spectroscopy

    Get PDF
    We use cathodoluminescence imaging spectroscopy to excite surface plasmon polaritons and measure their decay length on single crystal and polycrystalline gold surfaces. The surface plasmon polaritons are excited on the gold surface by a nanoscale focused electron beam and are coupled into free space radiation by gratings fabricated into the surface. By scanning the electron beam on a line perpendicular to the gratings, the propagation length is determined. Data for single-crystal gold are in agreement with calculations based on dielectric constants. For polycrystalline films, grain boundary scattering is identified as additional loss mechanism, with a scattering coefficient SG=0.2%

    Local density of states, spectrum, and far-field interference of surface plasmon polaritons probed by cathodoluminescence

    Get PDF
    The surface plasmon polariton (SPP) field intensity in the vicinity of gratings patterned in an otherwise planar gold surface is spatially resolved using cathodoluminescence (CL). A detailed theoretical analysis is presented that successfully explains the measured CL signal based upon interference of transition radiation directly generated by electron impact and SPPs launched by the electron and outcoupled by the grating. The measured spectral dependence of the SPP yield per incoming electron is in excellent agreement with rigorous electromagnetic calculations. The CL emission is shown to be similar to that of a dipole oriented perpendicular to the surface and situated at the point of electron impact, which allows us to establish a solid connection between the CL signal and the photonic local density of states associated to the SPPs

    Microphotonic parabolic light directors fabricated by two-photon lithography

    Get PDF
    We have fabricated microphotonic parabolic light directors using two-photon lithography, thin-film processing, and aperture formation by focused ion beam lithography. Optical transmission measurements through upright parabolic directors 22 μm high and 10 μm in diameter exhibit strong beam directivity with a beam divergence of 5.6°, in reasonable agreement with ray-tracing and full-field electromagnetic simulations. The results indicate the suitability of microphotonic parabolic light directors for producing collimated beams for applications in advanced solar cell and light-emitting diode designs

    Light trapping in ultrathin plasmonic solar cells

    Get PDF
    We report on the design, fabrication, and measurement of ultrathin film a-Si:H solar cells with nanostructured plasmonic back contacts, which demonstrate enhanced short circuit current densities compared to cells having flat or randomly textured back contacts. The primary photocurrent enhancement occurs in the spectral range from 550 nm to 800 nm. We use angle-resolved photocurrent spectroscopy to confirm that the enhanced absorption is due to coupling to guided modes supported by the cell. Full-field electromagnetic simulation of the absorption in the active a-Si:H layer agrees well with the experimental results. Furthermore, the nanopatterns were fabricated via an inexpensive, scalable, and precise nanopatterning method. These results should guide design of optimized, non-random nanostructured back reflectors for thin film solar cells

    Surface plasmon polariton modes in a single-crystal Au nanoresonator fabricated using focused-ion-beam milling

    Get PDF
    We use focused-ion-beam milling of a single-crystal Au surface to fabricate a 590-nm-long linear ridge that acts as a surface plasmon nanoresonator. Cathodoluminescence imaging spectroscopy is then used to excite and image surface plasmons on the ridge. Principal component analysis reveals distinct plasmonic modes, which proves confinement of surface-plasmon oscillations to the ridge. Boundary-element-method calculations confirm that a linear ridge is able to support highly-localized surface-plasmon modes (mode diameter < 100 nm). The results demonstrate that focused-ion-beam milling can be used in rapid prototyping of nanoscale single-crystal plasmonic components.Comment: 4 pages, 4 figure

    Development and initial validation of the role strain questionnaire for junior athletes (RSQ-JA)

    Get PDF
    In a series of related studies, the relevance of a role strain framework to interpret the difficulties junior elite athletes experience in their multiple life domains was assessed. Here, the Role Strain Questionnaire for Junior Athletes (RSQ-JA) was developed to measure the role strain experienced by junior athletes. In Study 1, role strain was explored via interviews with 20 elite junior athletes. Based on themes emerging from these interviews, an initial 65-item pool for the RSQ-JA was created and subjected to an exploratory factor analysis in Study 2. The factors derived in Study 2 were tested for factorial validity using confirmatory factor analysis in Study 3. Results supported a 22-item five factor structure for the RSQ-JA. These factors reflected the salient sources of role strain, namely; (i) overload in school, (ii) overload in sport and between roles, (iii) between-role conflict, (iv) underload, and (v) ambiguity. The RSQ-JA therefore provides the initial validation of the first measure of role strain experienced by junior elite athletes

    Near-infrared spectroscopic cathodoluminescence imaging polarimetry on silicon photonic crystal waveguides

    Get PDF
    We measure polarization- and wavelength-resolved spectra and spatial emission intensity distributions from silicon photonic crystal waveguides in the near-infrared spectral range using spectroscopic cathodoluminescence imaging polarimetry. A 30 keV electron beam, incident along the surface normal of the sample, acts as an ultrabroadband and deeply subwavelength excitation source. For photonic crystal waveguides with a broad range of design parameters, we observe a dominant emission intensity distribution that is strongly confined to the waveguide. For a period of 420 nm and a hole radius of 120 nm, this occurs at a wavelength of 1425 nm. The polarization-resolved measurements demonstrate that this feature is fully linearly polarized along the waveguide axis. Comparing the modal pattern and polarization to calculations of the electric field profiles confirms that we measure the odd TE waveguide mode of the system. This result demonstrates that the electron beam can couple to modes dominated by in-plane field components in addition to the more commonly observed modes dominated by out-of-plane field components. From the emission directionality, we conclude that we sample a leaky portion of the odd waveguide mode

    The Impact of Gymnastics on Children’s Physical Self-Concept and Movement Skill Development in Primary Schools

    Get PDF
    This study evaluated the effectiveness of an 8-week gymnastics curriculum on children’s movement competence and their physical self-concept. There were 113 children (46% girls, 49% intervention) with a mean age of 9.4 years (SD = 1.8) that participated. Intervention children underwent 8 weeks of gymnastics and the comparison group continued with their standard curriculum. Age was a significant co-variate, a separate analysis was conducted on the lower (grades 2 and 4) and upper (grade 6) groups. The lower age group showed significant improvement in favor of the gymnastic group in fundamental movement skills. The upper age group showed a significant improvement for the control group in general body coordination and fundamental movement skills. For all grades, the physical self-concept showed a significant main effect in favor of the gymnastics group. The gymnastics intervention was found to be of particular benefit for developing children’s movement competence and physical self-concept in younger children
    corecore