3,319 research outputs found
InP and GaAs characterization with variable stoichiometry obtained by molecular spray
Both InP and GaAs surfaces were studied in parallel. A molecular spray technique was used to obtain two semiconductor surfaces with different superficial compositions. The structures of these surfaces were examined by electron diffraction. Electron energy loss was measured spectroscopically in order to determine surface electrical characteristics. The results are used to support conclusions relative to the role of surface composition in establishing a Schottky barrier effect in semiconductor devices
Virtual reconstructions of the Théâtre de l'Athénée for archeoacoustic study
International audienceThe French ECHO project studies the use of voice in the recent history of theater. It is a multidisciplinary project which combines the efforts of historians, theater scientists, and acousticians. In the scope of this project an audiovisual simulation was created which combines auralizations with visualizations of former Théâtre de l'Athénée configurations issue from a series of renovations, enabling researchers to realistically perceive theater performances in foregone rooms. Simulations include the room, 2 actors on stage, and an audience. To achieve these simulation, architectural plans were studied from archives providing various details of the different theater configurations, from which the corresponding visual and room acoustic geometrical acoustics (GA) models were created. The resulting simulations allow for 360°audio-visual presentations at various positions in the theater using commercial standard hardware
Evaluating Primary Dendrite Trunk Diameters in Directionally Solidified Al-Si Alloys
The primary dendrite trunk diameters of Al-Si alloys that were directionally solidified over a range of processing conditions have been measured. These data are analyzed with a model based primarily on an assessment of secondary dendrite arm dissolution in the mushy zone. Good fit with the experimental data is seen and it is suggested that the primary dendrite trunk diameter is a useful metric that correlates well with the actual solidification processing parameters. These results are placed in context with the limited results from the aluminium - 7 wt. % silicon samples directionally solidified aboard the International Space Station as part of the MICAST project
Primary Dendrite Array: Observations from Ground-Based and Space Station Processed Samples
Influence of natural convection on primary dendrite array morphology during directional solidification is being investigated under a collaborative European Space Agency-NASA joint research program, Microstructure Formation in Castings of Technical Alloys under Diffusive and Magnetically Controlled Convective Conditions (MICAST). Two Aluminum-7 wt pct Silicon alloy samples, MICAST6 and MICAST7, were directionally solidified in microgravity on the International Space Station. Terrestrially grown dendritic monocrystal cylindrical samples were remelted and directionally solidified at 18 K per centimeter (MICAST6) and 28 K per centimeter (MICAST7). Directional solidification involved a growth speed step increase (MICAST6-from 5 to 50 millimeters per second) and a speed decrease (MICAST7-from 20 to 10 millimeters per second). Distribution and morphology of primary dendrites is currently being characterized in these samples, and also in samples solidified on earth under nominally similar thermal gradients and growth speeds. Primary dendrite spacing and trunk diameter measurements from this investigation will be presented
Study of an ILC Main Linac that Follows the Earth Curvature
In the base line configuration, the tunnel of the ILC will follow the earth curvature. The emittance growth in a curved main linac has been studied including static and dynamic imperfections. These include effects due to current ripples in the power supplies of the steering coils and the impact of the beam position monitors scale errors
Shear-melting of a hexagonal columnar crystal by proliferation of dislocations
A hexagonal columnar crystal undergoes a shear-melting transition above a
critical shear rate or stress. We combine the analysis of the shear-thinning
regime below the melting with that of synchrotron X-ray scattering data under
shear and propose the melting to be due to a proliferation of dislocations,
whose density is determined by both techniques to vary as a power law of the
shear rate with a 2/3 exponent, as expected for a creep model of crystalline
solids. Moreover, our data suggest the existence under shear of a line hexatic
phase, between the columnar crystal and the liquid phase
Reconciling Semiclassical and Bohmian Mechanics: II. Scattering states for discontinuous potentials
In a previous paper [J. Chem. Phys. 121 4501 (2004)] a unique bipolar
decomposition, Psi = Psi1 + Psi2 was presented for stationary bound states Psi
of the one-dimensional Schroedinger equation, such that the components Psi1 and
Psi2 approach their semiclassical WKB analogs in the large action limit.
Moreover, by applying the Madelung-Bohm ansatz to the components rather than to
Psi itself, the resultant bipolar Bohmian mechanical formulation satisfies the
correspondence principle. As a result, the bipolar quantum trajectories are
classical-like and well-behaved, even when Psi has many nodes, or is wildly
oscillatory. In this paper, the previous decomposition scheme is modified in
order to achieve the same desirable properties for stationary scattering
states. Discontinuous potential systems are considered (hard wall, step, square
barrier/well), for which the bipolar quantum potential is found to be zero
everywhere, except at the discontinuities. This approach leads to an exact
numerical method for computing stationary scattering states of any desired
boundary conditions, and reflection and transmission probabilities. The
continuous potential case will be considered in a future publication.Comment: 18 pages, 8 figure
Comparative study between AZERTY-type and K- Hermes virtual keyboards dedicated to users with cerebral palsy
International audienceThe aim of this paper is to compare two virtual keyboards for people with cerebral palsy; many of these users have difficulty performing actions using their upper limbs due to large numbers of unwanted movements. The first is a classical QWERTY type keyboard, called Clavicom NG. The second is the K-Hermes proposed in this paper. K-Hermes is a reduced and monotape keyboard; its entry principles are inspired by the T9 keyboard. The aim of the experiment is to demonstrate the reduced effort and increased speed of typing with the keyboard suggested for people with Cerebral Palsy
Macrosegregation Resulting from Directional Solidification Through an Abrupt Change in Cross-Sections
Simulations of the directional solidification of two hypoeutectic alloys (Al-7Si alloy and Al-19Cu) and resulting macrosegregation patterns are presented. The casting geometries include abrupt changes in cross-section from a larger width of 9.5 mm to a narrower 3.2 mm width then through an expansion back to a width of 9.5 mm. The alloys were chosen as model alloys because they have similar solidification shrinkages, but the effect of Cu on changing the density of the liquid alloy is about an order of magnitude greater than that of Si. The simulations compare well with experimental castings that were directionally solidified in a graphite mold in a Bridgman furnace. In addition to the simulations of the directional solidification in graphite molds, some simulations were effected for solidification in an alumina mold. This study showed that the mold must be included in numerical simulations of directional solidification because of its effect on the temperature field and solidification. For the model alloys used for the study, the simulations clearly show the interaction of the convection field with the solidifying alloys to produce a macrosegregation pattern known as "steepling" in sections with a uniform width. Details of the complex convection- and segregation-patterns at both the contraction and expansion of the cross-sectional area are revealed by the computer simulations. The convection and solidification through the expansions suggest a possible mechanism for the formation of stray grains. The computer simulations and the experimental castings have been part of on-going ground-based research with the goal of providing necessary background for eventual experiments aboard the ISS. For casting practitioners, the results of the simulations demonstrate that computer simulations should be applied to reveal interactions between alloy solidification properties, solidification conditions, and mold geometries on macrosegregation. The simulations also presents the possibility of engineering the mold-material to avoid, or mitigate, the effects of thermosolutal convection and macrosegregation by selecting a mold material with suitable thermal properties, especially its thermal conductivity
- …