210 research outputs found
Comparative cytotoxicity evaluation of eight root canal sealers
The aim of the present study is to evaluate and compare the cytotoxic effects of eight root canal sealers (BioRoot RCS, TotalFill BC Sealer, MTA Fillapex, Sealapex, AH Plus, EasySeal, Pulp Canal Sealer, N2) on immortalized human gingival fibroblasts over a period of 24, 48 and 72 hours. Immortalized human gingival fibroblast-1 HGF-1 (ATCC CRL-2014) were incubated. Root canal sealers were then placed into sterile, cylindrical Teflon moulds. The extraction was made eluting the sealers in cell culture medium. Cells (1 × 104) were seeded in each well of a 96-well plate and incubated for 24 h at 37°C. Cultures were then exposed to 100 ?L of the extracts medium. The percentage of viable cells in each well was calculated relative to control cells set to 100%. BioRoot RCS and TotalFill BC Sealer extracted for 24h showed no cytotoxic effect, while it was mild by using 48 and 72 h extracts. No cytotoxic effect was measured by using AH Plus medium eluted for 24 h, while it was moderate after 48 h and severe after 72 h. Pulp Canal Sealer, Sealapex and N2 showed moderately cytotoxic activity for all the extraction times. EasySeal and MTA Fillapex remained severely or borderline mildly cytotoxic for all the extraction times. In the present study only BioRoot RCS, TotalFill BC Sealer and AH Plus showed no cytotoxic effects at least in the first 24h. All the other sealers revealed moderately or severely cytotoxic activity during all the extraction times
Protective effect of zinc-hydroxyapatite toothpastes on enamel erosion: an in vitro study
The aim of the present study was to test the impact of different toothpastes with Zinc-Hydroxyapatite (Zn-HAP) on preventing and repairing enamel erosion compared to toothpastes with and without fluoride.
The following four toothpastes were tested: two toothpastes with Zn-HAP, one toothpaste with fluoride and one toothpaste without fluoride. An additional control group was used in which enamel specimens were not treated with toothpaste. Repeated erosive challenges were provided by immersing bovine enamel specimens (10 per group) in a soft drink for 2 min (6mL, room temperature) at 0, 8, 24 and 32 h. After each erosive challenge, the toothpastes were applied neat onto the surface of specimens for 3 min without brushing and removed with distilled water. Between treatments the specimens were kept in artificial saliva. Enamel hardness, after the erosive challenge and toothpaste treatment was monitored using surface micro-hardness measurements.
As expected, repeated erosive challenge by a soft drink for total of 8 min significantly reduced enamel surface hardness (ANOVA, p < 0.05). No re-hardening of the surface softened enamel was observed in the group treated with fluoride-free toothpaste. Surface hardness of the softened enamel increased when the specimens were treated with the fluoride toothpaste and the two toothpastes with Zn-HAP (p < 0.05).
Toothpaste with Zn-HAP resulted in significant enamel remineralisation of erosively challenged enamel, indicating that these toothpastes could provide enamel health benefits relevant to enamel erosion
Antibacterial activity of different root canal sealers against Enterococcus faecalis
The aim of the present study was to compare in vitro the antimicrobial activity of different root canal sealers against Enterococcus faecalis, prior and subsequent to setting. Agar diffusion test (ADT) was used for evaluating the antibacterial activity of non-set sealer while the direct contact test (DCT) was used for after setting. ADT: Except for TotalFill BC Sealer all the others sealers tested showed antibacterial activity. BioRoot?RCS, MTA Fillapex and Sealapex Root Canal Sealer showed the lowest antibacterial activity, a significant increase in antibacterial effect for both Pulp Canal Sealer? and AH plus sealers were found. Significantly higher were the mean diameters of the bacterial inhibition zone by both EasySeal or N2 sealers. DCT: AH plus and Sealapex Root Canal Sealer doesn?t show any bactericidal effect after 6 min of contact. After 15 and 60 min of contact a significant increment for AH plus and for Sealapex Root Canal Sealer of the bactericidal effect was found. Significantly much higher was the antibacterial effect of Sealapex Root Canal Sealer compare to that observed for AH plus. BioRootTMRCS, MTA Fillapex, Pulp Canal Sealer? and N2 showed at least means of the number of colonies formed in milliliter after 6 min of contact. Except for N2, a significant increase in bactericidal effect after 15 and 60 min for the other compared sealers (BioRootTMRCS, MTA Fillapex and Pulp Canal Sealer?). For every contact times considered, both TotalFill BC Sealer and EasySeal were bactericidal against E. faecalis and killed all bacteria
Microleakage in Class II composite restorations with margins below the CEJ: in vitro evaluation of different restorative techniques
Objectives: The purpose of this in vitro study was to evaluate the microleakage in "deep" Class II composite restorations
with gingival cavosurface margin below the CEJ (cemento-enamel junction) and restored with different techniques.
Study Design: Fifty human teeth were used. In each tooth two standardized Class II slot cavities (on mesial and
on distal surfaces) were prepared: the buccolingual extension of the cavities was 4 mm; the gingival wall was
located in dentin/cementum (2 mm beyond the CEJ). The prepared teeth were randomly assigned to 5 experimental groups (of 10 specimens and 20 cavities each) and restored. Group 1: Filtek TM Supreme XTE Flowable
(3MESPE) + Universal Filtek Supreme XTE (3MESPE), Group 2: GrandioSO Heavy Flow (Voco) + GrandioSo
(Voco), Group 3: SDRTm (Dentsply Caulk) + Esthet-X® HD (Dentsply Caulk), Group 4: SonicFill (Kerr), Group
5: Grandio (Voco). After thermocycling, the specimens were immersed in a 0.5% basic fuchsine dye solution and
incubated at 37°C for 24 hours. The teeth were subsequently sectioned mesiodistally. All specimens were examined at 25× in a stereomicroscope and standardized digital images were obtained. Dye penetration was measured
from gingival margins.
Results: The results demonstrated no significant leakage differences between Group 4 and Group 5, that both
showed significantly higher frequency distribution of Score 0. Group 2 and Group 3 showed a significant prevalence of Score 1, whereas Group 1 showed significantly higher frequency of Score 2.
Conclusions: None of the restorative techniques tested completely eliminated microleakage dye penetration in
dentin margins; marginal adaptation in Class II composite restorations with gingival wall below the CEJ varied in
both substrates and from different restorative techniques used
Preventive effects of different protective agents on dentin erosion: an in vitro investigation
The purpose of this in vitro study was to evaluate the preventive effects of different protective agents on dentine erosion, measuring mean percentage weight loss. Dissolution of dentine under erosive challenges caused by soft drinks was analyzed: specimens were weighed following each immersion period, with mean percent weight losses calculated.
Extracted teeth were sectioned into uniform slabs. Seventy permanent enamel specimens were randomly distributed to seven groups. Initial weights of all dentin specimens were performed. The fluoride pastes Remin Pro, MI Paste Plus, Tooth Mousse, Biorepair, Biorepair Plus and Regenerate were used in this study. A control group was treated just with tap water. The specimens then were immersed in Coca-Cola for a total of 32 min at room temperature. Finally each specimen was dry and weighed. The mass loss was calculated as a percentage of that observed prior the fluoride pastes application. Weight loss data were subjected to Analysis of Variance (One-way ANOVA) followed by Bonferroni’s post hoc tests.
Percent weight loss of specimens exposed to early stages in Coca-Cola showed linear progression with time. Specimen’s application of fluoridated varnishes such as Biorepair or Regenerate, prior immersion in Coca-Cola, significantly protect dentin from demineralization. Otherwise, application of Tooth Mousse or Biorepair Plus increased dentin demineralization starting from 24 min of immersion in Coca-Cola.
Despite the limitations of this study, the protective pastes that showed the less weight loss due to the acidic challenge are Biorepair and Regenerate
Decalcifying efficacy of different irrigating solutions: effect of cetrimide addition
Abstract: The objective of the present study was to evaluate and com-pare the influence of cetrimide on decalcifying capability of different irrigating solutions. Fifteen maxillary central incisor teeth has been col-lected. The canals were prepared in order to obtain four samples from each root. The specimens were randomly divided into 6 experimental groups (n=10) according to tested irrigating agents. Irrigating agents consisted in different composition of EDTA and citric acid solutions, addicted or not with cetrimide. Each specimen was submitted to three successive 5-min immersions in each solution. After exposures, the concentration of Ca2+ extracted was measured by inductively coupled plasma-atomic emission spectrometry (ICP-AES). Data were analysed by means of Kruskal Wallis and Mann Whitney tests. Significance was predetermined at p < 0.05. For all irrigants, the amounts of Ca2+ extract-ed from root canal dentin samples at 10 minutes were not significantly different from values reported after 15 minutes respectively. Therefore, for all irrigants tested, 10 minutes of application are sufficient to obtain maximum Ca2+ release. Moreover citric acid based agents observed a higher release of Ca2+. The addition of cetrimide did not affect the de-calcifying capability of the EDTA and citric acid solutions.Keywords: Chelating Agents; Dentin; Dentistry; Endodontics
Evaluation of the antibacterial activity of a new ozonized olive oil against oral and periodontal pathogens
In the present study, the antimicrobial properties of a new ozonized olive oil (O-zone gel) against oral and periodontal pathogens will be evaluated and compared with that of common CHX-based agents. O-zone gel was compared with two agents based on chlorhexidine digluconate (CHX): Corsodyl Dental Gel and Plak Gel. A. actinomycetemcomitans, P. intermedia and S. mutans, were selected and the antibacterial capability of the compounds was tested by using direct contact agar diffusion test (DCT) and minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) evaluations. Differences between specific means were analyzed by a one-way analysis of variance (ANOVA). Group means were compared using a one-way ANOVA and Tukey?s test (P<0.05). O-zone gel reported inhibition zones which correspond to 33% and 43% of that achieved by the CHX agents. No inhibition of bacterial growth (MIC) on the Gram-positive strain by using O-zone gel was found and no antimicrobial effect (MBC) was observed by using O-zone gel on both Gram-negative and -positive strains. The new ozonated oil was a relatively moderate antiseptic. Gram-negative bacteria proved to be more sensitive to ozonized olive oil than Gram-positive ones. The ozonized olive oil demonstrated a lower antibacterial activity if compared to the CHX-based agents tested
Shear bond strength of one-step self-etch adhesives to dentin : evaluation of NaOCl pretreatment
The aim of this study was to evaluate the influence of dentin pretreatment with NaOCl on shear bond strength of four one-step self-etch adhesives with different pH values. Bovine permanent incisors were used. Four one-step self-etch adhesives were tested: Adper? Easy Bond, Futurabond NR, G-aenial Bond, Clearfil S3 Bond. One two-step self-etch adhesive (Clearfil SE Bond) was used as control. Group 1- no pretreatment; group 2- pretratment with 5,25 % NaOCl; group 3- pretreatment with 37 % H3PO4 etching and 5,25 % NaOCl. A hybrid composite resin was inserted into the dentin surface. The specimens were tested in a universal testing machine. The examiners evaluated the fractured surfaces in optical microscope to determine failure modes, quantified with adhesive remnant index (ARI). Dentin pretreatment variably influenced bond strength values of the different adhesive systems. When no dentin pretreatment was applied, no significant differences were found (P >.05) among four adhesives tested. No significant differences were recorded when comparing NaOCl pretreatment with H3PO4 + NaOCl pretreatment for all adhesive tested (P >.05) except Clearfil S3 Bond that showed higher shear bond strength values when H3PO4 was applied. Frequencies of ARI scores were calculated. The influence of dentin pretreatment with NaOCl depends on the composition of each adhesive system used. There was no difference in bond strength values among self-etch adhesives with different pH values
Remineralizing effect of a zinc-hydroxyapatite toothpaste on enamel erosion caused by soft drinks : ultrastructural analysis
The aim of the present in vitro study was to evaluate the protective effects of a zinc-hydroxyapatite toothpaste on repairing enamel erosion produced by a soft drink (Coca-Cola) compared to toothpastes with and without fluoride using Scanning Electron Microscopy (SEM). Fifty specimens were assigned to 5 groups of 10 specimens each. (Group 1: no erosive challenge, no toothpaste treatment, group 2: erosive challenge, no toothpaste treatment, 3: erosive challenge, toothpaste without fluoride, group 4: erosive challenge, fluoride toothpaste treatment, group 5: erosive challenge, zinc-hydroxyapatite toothpaste treatment). Repeated erosive challenges were provided by immersing bovine enamel specimens (10 per group) in a soft drink for 2 min (6mL, room temperature) at 0, 8, 24 and 32 h. After each erosive challenge, the toothpastes were applied neat onto the surface of specimens for 3 min without brushing and removed with distilled water. Between treatments the specimens were kept in artificial saliva. The surface of each specimen was imaged by SEM. Statistically significant differences were found between the samples used as control and those immersed in Coca-Cola (group 1 and 2): indeed among all groups the highest grade of damage was found in group 2. Instead the lowest grade was recorded in the samples of group 5 (Zinc hydroxyapatite toothpaste). The results of this study confirmed the potential benefit the Zn-HAP technology could provide in protecting enamel from erosive acid challenges. The treatment of erosively challenged enamel with Zn-Hap toothpaste showed a clear protective effect
In vitro antibacterial activity of different pulp capping materials
Background: Direct pulp capping involves the application of a dental material to seal communications between the
exposed pulp and the oral cavity (mechanical and carious pulp exposures) in an attempt to act as a barrier, protect
the dental pulp complex and preserve its vitality. The aim of this study was to evaluate and compare, by the agar
disc diffusion test, the antimicrobial activity of six different pulp-capping materials: Dycal (Dentsply), Calcicur
(Voco), Calcimol LC (Voco), TheraCal LC (Bisco), MTA Angelus (Angelus), Biodentine (Septodont).
Material and Methods:
Streptococcus salivarius
,
Streptococcus sanguis
and
Streptococcus mutans
strains were
selected to evaluate the antimicrobial activity by the agar disc diffusion test of different pulp capping materials.
Paper disks were impregnated whit each pulp capping materials and placed onto culture agar-plates pre-adsorbed
with bacterial cells and further incubated for 24 h at 37°C. The growth inhibition zones around each pulp capping
materials were recorded and compared for each bacterial strain.
Results: For the investigation of the antibacterial properties the ANOVA showed the presence of significant differences among the various materials. Tukey test showed that MTA-based materials induced lower growth inhibition
zones.
Conclusions: MTA-based products show a discrete antibacterial activity varying from calcium hydroxide-based
materials which present an higher antibacterial activity
- …