Synthesis of purine-based ionic liquids and their applications

Bio-based ionic liquids (ILs) are being increasingly sought after, as they are more sustainable and eco-friendly. Purines are the most widely distributed, naturally occurring N-heterocycles, but their low water-solubility limits their application. In this work, four purines (theobromine, theophylline, xanthine, and uric acid) were combined with the cation tetrabutylammonium to synthesize bio-based ILs. The physico-chemical properties of the purine-based ILs were characterized, including their melting and decomposition temperatures and water-solubility. The ecotoxicity against the microalgae Raphidocelis subcapitata was also determined. The ILs show good thermal stability (>457 K) and an aqueous solubility enhancement ranging from 53- to 870-fold, in comparison to their respective purine percursors, unlocking new prospects for their application where aqueous solutions are demanded. The ecotoxicity of these ILs seems to be dominated by the cation, and it is similar to chloride-based IL, emphasizing that the use of natural anions does not necessarily translate to more benign ILs. The application of the novel ILs in the formation of aqueous biphasic systems (ABS), and as solubility enhancers, was also evaluated. The ILs were able to form ABS with sodium sulfate and tripotassium citrate salts. The development of thermoresponsive ABS, using sodium sulfate as a salting-out agent, was accomplished, with the ILs having different thermosensitivities. In addition, the purine-based ILs acted as solubility enhancers of ferulic acid in aqueous solution.publishe

Potential of long chain ionic liquids for on-line sample concentration techniques: Application to micelle to solvent stacking

International audienc

Concentrated assemblies of magnetic nanoparticles in ionic liquids

International audienceMaghemite (γ-Fe 2 O 3) nanoparticles (NPs) can be successfully dispersed in a protic ionic liquid, ethylammonium nitrate (EAN) by transfer from aqueous dispersions into EAN. As the aqueous systems are well controlled, several parameters can be tuned. Their crucial role on the interparticle potential and on the structure of the dispersions is evidenced : (i) The size of the NPs tunes the interparticle attraction monitoring dispersions to be either monophasic or gas-liquid like phase separated; (ii) The nature of the initial counterion in water (here sodium, lithium or ethyl ammonium) and the amount of added water (< 20% vol) modulate the interparticle repulsion. Very concentrated dispersions with a volume fraction around 25% are obtained thanks to the gas-liquid like phase separations. Such conclusions are derived from a fine structural and dynamical study of the dispersions on a large range of spatial scales by coupling several techniques: chemical analyses, optical microscopy, dynamic light scattering, magneto-optic birefringence and Small Angle Scattering

Study of la(III) and Ce(III) extraction from aqueous solutions with thermomorphic ionic liquid and betaine extractant

International audienc

Study of la(III) and Ce(III) extraction from aqueous solutions with thermomorphic ionic liquid and betaine extractant

International audienc

Efficient method for in situ agitation of liquids directly inside NMR spectrometer

The objective of the method is to allow agitation and fast homogenization of liquid systems in NMR tubes, directly inside the NMR spectrometer. The setup makes it possible to record spectra of samples that are macroscopically not stable, as dispersions of large particles. It makes also possible to fasten the homogeneization of liquid during a reaction or a phase transition. In the present paper, the method has been evaluated using homogeneous liquid extraction (HLLE). This configuration can also be used to introduce gases in different systems to perform various types of experiments. The set up consists in a Teflon tube inserted in the NMR tube bringing gas that yields agitation by bubbling. The gas flow is tuned using an electronically operated valve connected to gas line and to the NMR console. The method details how to reach proper homogenization without any perturbation, as liquid leaks. • An easy method for agitation of liquids inside NMR spectrometers. • The set up can be used for the insertion of gases in the NMR tube inside the spectrometer. • The method allows the study of the mixing of biphasic systems by NMR techniques

Organisation of clay nanoplatelets in a polyelectrolyte-based hydrogel

International audienceWe investigate the organisation of clay nanoplatelets within a hydrogel based on modified ionenes, cationic polyelectrolytes forming physically crosslinked hydrogels induced by hydrogen bonding and - stacking. Combination of small angle X-ray and neutron scattering (SAXS, SANS) reveals the structure of the polyelectrolyte network as well as the organisation of the clay additives. The clay-free hydrogel network features a characteristic mesh-size between 20 and 30 nm, depending on the polyelectrolyte concentration. Clay nanoplatelets inside the hydrogel organise in a regular face-to-face stacking manner, with a large repeat distance, following rather closely the hydrogel mesh-size. The presence of the nanoplatelets does not modify the hydrogel mesh size. Further, the clay-compensating counterions (Na+, Ca2+ or La3+) and the clay type (montmorillonite, beidellite) both have a significant influence on nanoplatelet organisation. The degree of nanoplatelet ordering in the hydrogel is very sensitive to the negative charge location on the clay platelet (different for each clay type). Increased nanoplatelet ordering leads to an improvement of the elastic properties of the hydrogel. On the contrary, the presence of dense clay aggregates (tactoids), induced by multi-valent clay counterions, destroys the hydrogel network as seen by the reduction of the elastic modulus of the hydrogel

Ion transfer processes at ionic liquid based redox active drop deposited on an electrode surface

International audienc

Physicochemical properties of novel cholinium ionic liquids for the recovery of silver from nitrate media

International audienc

Aggregation of Plate-like Colloids Induced by Charged Polymer Chains: Organization at the Nanometer Scale Tuned by Polymer Charge Density

International audienceWe study the aggregation of charged plate-like colloids, Na-montmorillonite clays, in the presence of ionenes, oppositely charged polymer chains. The choice of the charged polymer allows tuning its linear charge density to match/mismatch the average charge separation on the clay surfaces. We assess the nanoscale structure of the aggregates formed by small-angle X-ray and neutron scattering. The nanoscale features of the formed clay aggregates are dominated by the presence of a stacking peak, giving clear evidence for the formation of clay tactoids, that is, a face-to-face aggregation geometry of the clay platelets. The chain charge density of ionenes influences not only the stacking repeat distance within the clay tactoids but also the extent of stacking and abundance of the tactoids. We may distinguish two regimes as a function of clay and ionene polymer charge densities (ρc and ρp, respectively). The first regime applies to ρp > ρc and ρp ≈ ρc, that is, for highly and “matching” charged chains. Under these conditions, the intercalated chains lie in a flat conformation within the tactoids, irrespective of the ionic strength (within the range studied, i.e., up to 0.05 M NaBr). For weakly charged chains, ρp < ρc, undulation of the ionene chains within the tactoid is seen. The degree of undulation increases with ionic strength due to the decreasing persistence length of the ionene chains. The extent of stacking (5–10 platelets per tactoid) is a general feature of all the systems, and its origin remains unknown. The system corresponding to the closest match in charge separations on the clay surface and on the polymer chain (ρp ≈ ρc) features the highest abundance of tactoids. This coincides with the highest macroscopic density as deduced from simple visual inspection of sediment volumes. This leads to the open question regarding the link between the density at the nanoscale and the macroscopic density and sedimentation behavior of the aggregate