5 research outputs found
Exploring the role of the connection length of screen-printed electrodes towards the hydrogen and oxygen evolution reactions
Zero-emission hydrogen and oxygen production are critical for the UK to reach net-zero greenhouse gasses by 2050. Electrochemical techniques such as water splitting (electrolysis) coupled with renewables energy can provide a unique approach to achieving zero emissions. Many studies exploring electrocatalysts need to “electrically wire” to their material to measure their performance, which usually involves immobilization upon a solid electrode. We demonstrate that significant differences in the calculated onset potential for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) can be observed when using screen-printed electrodes (SPEs) of differing connection lengths which are immobilized with a range of electrocatalysts. This can lead to false improvements in the reported performance of different electrocatalysts and poor comparisons between the literature. Through the use of electrochemical impedance spectroscopy, uncompensated ohmic resistance can be overcome providing more accurate Tafel analysis
Comparative study of the analysis of seized samples by GC-MS, 1H NMR and FT-IR spectroscopy within a Night-Time Economy (NTE) setting
Rapid analysis of surrendered or seized drug samples provides important intelligence for health (e.g. treatment or harm reduction), and custodial services. Herein, three in-situ techniques, GC-MS, 1H NMR and FT-IR spectroscopy, with searchable libraries, are used to analyse 318 samples qualitatively, using technique specific library-based searches, obtained over the period 24th – 29th August 2019. 259 samples were identified as consisting of a single component, of which cocaine was the most prevalent (n = 158). Median match scores for all three techniques were ≥ 0.84 and showed agreement except for metformin (n = 1), oxandrolone (identified as vitamin K by IR (n = 4)), diazepam (identified as zolpidem by FT-IR (n = 2)) and 2-Br-4,5-DMPEA (n = 1), a structural isomer of 2C-B identified as a polymer of cellulose (cardboard) by FT-IR. 51 samples were found to consist of two or more components, of which 49 were adulterated cocaine samples (45 binary and 4 tertiary samples). GC-MS identified all components present in the 49 adulterated cocaine samples, whereas IR identified only cocaine in 88 % of cases (adulterant only = 12 %). The breakdown for 1H NMR spectroscopy was all components identified (51 %), cocaine only (33 %), adulterant only (10 %), cocaine and one adulterant (tertiary mixtures only, 6 %)
Optimised graphite/carbon black loading of recycled PLA for the production of low-cost conductive filament and its application to the detection of β-estradiol in environmental samples.
The production, optimisation, physicochemical, and electroanalytical characterisation of a low-cost electrically conductive additive manufacturing filament made with recycled poly(lactic acid) (rPLA), castor oil, carbon black, and graphite (CB-G/PLA) is reported. Through optimising the carbon black and graphite loading, the best ratio for conductivity, low material cost, and printability was found to be 60% carbon black to 40% graphite. The maximum composition within the rPLA with 10 wt% castor oil was found to be an overall nanocarbon loading of 35 wt% which produced a price of less than £0.01 per electrode whilst still offering excellent low-temperature flexibility and reproducible printing. The additive manufactured electrodes produced from this filament offered excellent electrochemical performance, with a heterogeneous electron (charge) transfer rate constant, k0 calculated to be (2.6 ± 0.1) × 10-3 cm s-1 compared to (0.46 ± 0.03) × 10-3 cm s-1 for the commercial PLA benchmark. The additive manufactured electrodes were applied to the determination of β-estradiol, achieving a sensitivity of 400 nA µM-1, a limit of quantification of 70 nM, and a limit of detection of 21 nM, which compared excellently to other reports in the literature. The system was then applied to the detection of ß-estradiol within four real water samples, including tap, bottled, river, and lake water, where recoveries between 95 and 109% were obtained. Due to the ability to create high-performance filament at a low material cost (£0.06 per gram) and through the use of more sustainable materials such as recycled polymers, bio-based plasticisers, and naturally occurring graphite, additive manufacturing will have a permanent place within the electroanalysis arsenal in the future
Comparative study of the analysis of seized samples by GC-MS, 1H NMR and FT-IR spectroscopy within a Night-Time Economy (NTE) setting
Rapid analysis of surrendered or seized drug samples provides important intelligence for health (e.g. treatment or harm reduction), and custodial services. Herein, three in-situ techniques, GC-MS, 1H NMR and FT-IR spectroscopy, with searchable libraries, are used to analyse 318 samples qualitatively, using technique specific library-based searches, obtained over the period 24th – 29th August 2019. 259 samples were identified as consisting of a single component, of which cocaine was the most prevalent (n = 158). Median match scores for all three techniques were ≥0.84 and showed agreement except for metformin (n = 1), oxandrolone (identified as vitamin K by IR (n = 4)), diazepam (identified as zolpidem by FT-IR (n = 2)) and 2-Br-4,5-DMPEA (n = 1) a structural isomer of 2C-B identified as a polymer of cellulose (cardboard) by FT-IR. 51 samples were found to consist of two or more components, of which 49 were adulterated cocaine samples (45 binary and 4 tertiary samples). GC-MS identified all components present in the 49 adulterated cocaine samples, whereas IR identified only cocaine in 88% of cases (adulterant only = 12%). The breakdown for 1H NMR spectroscopy was all components identified (51%), cocaine only (33%), adulterant only (10%), cocaine and one adulterant (tertiary mixtures only, 6%)