Flexural characterization of a novel recycled-based polymer blend for structural applications

The use of recycled plastic in construction fields, among others, is becoming a turning point for resolving significant related problems such as resource management, sustainability and plastic waste generation. Hence, in the context of sustainability, the "Three R’s": reduce, reuse and recycle, are getting more attention day after day. There has been a huge surge in the recycling and reuse of plastic composites due to their eco-friendliness, lightweight, life cycle superiority and low cost. However, because of a lack of knowledge of their performance and behavior, their application is still limited in the real world. The aim of this research is to understand the behavior of recycled plastic and derive its material properties which can be used in the design of structural and non-structural elements. In the present study, three stiffened plates are manufactured from 80% of recycled plastic (around 50% of recycled Polypropylene rPP, and around 50% of High Density Polyethylene PEHD with a little part of Low Density Polyethylene PELD) and 20% of virgin polypropylene PP Copolymer. Three-point bending test is performed on the three specimens. In the experimental campaign, the behavior of these stiffened plates under pure bending loads has been studied. After that, the material properties are extracted from the data collected during the experiment using Ramberg–Osgood equation. Then, once implemented in finite elementcmodels, it was observed that the simulated material shows similar behavior to the one registered during the experiment. As a conclusion, the derived material properties show reliability and they can be used to study a design of a structural or non-structural component including recycled plastic

Mammary cistern size during the dry period in healthy dairy cows: A preliminary study for an ultrasonographic evaluation

We evaluated the udder cistern (UC) size during the dry period using ultrasound. Forty healthy quarters were evaluated in both the longitudinal and cross-section of the UC. Quarters were evaluated at the drying-off (T0) and 24 h later (T1), then regularly until the end of the dry period (T7–T58), during the colostrum production phase (TCPP) and at 7 days in milking (T7PP). The Spearman test was applied to find the correlation between the ultrasonographic UC size (UUCS) assessment and time. The Friedman test and Dunn’s test for multiple comparisons as a post-hoc test were performed to compare the forequarter and hindquarter cross-sections (FQCSs and HQCSs, respectively) and the forequarter and hindquarter longitudinal sections (FQLSs and HQLSs, respectively) at T0 vs. T58 vs. TCPP vs. T7PP. A total of 440 images were evaluated. A negative linear correlation between time and FQCS and FQLS (r = −0.95; p < 0.0004) and between time and HQCS and HQLS (r = −0.90; p < 0.002) was found. The UUCS decreased throughout the dry period, starting to increase at the beginning of the next lactation. Measuring the UUCS provides useful information for monitoring the dry period

Essential oils as post-harvest crop protectants against the fruit fly drosophila suzukii: Bioactivity and organoleptic profile

The essential oils extracted from mandarin (Citrus reticulata Blanco) fruits, and from tea tree (Maleleuca alternifolia (Maiden and Betche) Cheel) leaves have been chemically analyzed and tested for their bioactivity against D. suzukii. Besides, to estimate consumers’ acceptability of the essential oil (EO) treatments, we evaluated their impact on the organoleptic characteristics of the EO-treated fruits. The main chemical constituents of the two EOs were 1,8-cineole and 4-terpineol for M. alternifolia (22.4% and 17.6% of the total components, respectively), and limonene (83.6% of the total components) for C. reticulata. The behavioral tests indicate that the two EOs are able to deter D. suzukii oviposition and that D. suzukii shows positive chemotaxis to low concentrations of the EOs and negative chemotaxis when the EO concentration increases. While no negative effects on the organoleptic profiles were detected for fruits treated with C. reticulata EO, the olfactory profile of fruits treated with M. alternifolia EO was so negative that they were defined as “not suitable for consumption” by panellists. Overall, our findings indicate that the use of EOs for the post-harvest protection of small fruits is feasible, provided that the essential oils are selected not only for their bioactivity against the insect pest but also for their affinity with the consumers’ sensorial system

SINEUP non-coding RNA activity depends on specific N6-methyladenosine nucleotides

SINEUPs are natural and synthetic antisense long non-coding RNAs (lncRNAs) selectively enhancing target mRNAs translation by increasing their association with polysomes. This activity requires two RNA domains: an embedded inverted SINEB2 element acting as effector domain, and an antisense region, the binding domain, conferring target selectivity. SINEUP technology presents several advantages to treat genetic (haploinsufficiencies) and complex diseases restoring the physiological activity of diseased genes and of compensatory pathways. To streamline these applications to the clinic, a better understanding of the mechanism of action is needed. Here we show that natural mouse SINEUP AS Uchl1 and synthetic human miniSINEUP-DJ-1 are N6-methyladenosine (m6A) modified by METTL3 enzyme. Then, we map m6A-modified sites along SINEUP sequence with Nanopore direct RNA sequencing and a reverse transcription assay. We report that m6A removal from SINEUP RNA causes the depletion of endogenous target mRNA from actively translating polysomes, without altering SINEUP enrichment in ribosomal subunit-associated fractions. These results prove that SINEUP activity requires an m6A-dependent step to enhance translation of target mRNAs, providing a new mechanism for m6A translation regulation and strengthening our knowledge of SINEUP-specific mode of action. Altogether these new findings pave the way to a more effective therapeutic application of this well-defined class of lncRNAs

SINEUPs: A novel toolbox for RNA therapeutics

RNA molecules have emerged as a new class of promising therapeutics to expand the range of druggable targets in the genome. In addition to 'canonical' protein-coding mRNAs, the emerging richness of sense and antisense long non-coding RNAs (lncRNAs) provides a new reservoir of molecular tools for RNA-based drugs. LncRNAs are composed of modular structural domains with specific activities involving the recruitment of protein cofactors or directly interacting with nucleic acids. A single therapeutic RNA transcript can then be assembled combining domains with defined secondary structures and functions, and antisense sequences specific for the RNA/DNA target of interest. As the first representative molecules of this new pharmacology, we have identified SINEUPs, a new functional class of natural antisense lncRNAs that increase the translation of partially overlapping mRNAs. Their activity is based on the combination of two domains: An embedded mouse inverted SINEB2 element that enhances mRNA translation (effector domain) and an overlapping antisense region that provides specificity for the target sense transcript (binding domain). By genetic engineering, synthetic SINEUPs can potentially target any mRNA of interest increasing translation and therefore the endogenous level of the encoded protein. In this review, we describe the state-of-the-art knowledge of SINEUPs and discuss recent publications showing their potential application in diseases where a physiological increase of endogenous protein expression can be therapeutic

Near term perspectives for fusion research and new contributions by the Ignitor program

The main advances made within the Ignitor program, that is aimed at investigating the physics of fusion burning plasmas near ignition, are described. In particular, the operation of the machine in the H and I regimes at the 10 MA plasma current levels has been considered and analyzed. The unique properties of the plasmas that can be generated by operating the machine with reduced parameters (lower magnetic fields and plasma currents) relative to those needed to achieve ignition are identified. A key feature of this operation is the relatively fast duty cycle that can be maintained. The Ideal Ignition Conditions, under which the density barrier due to bremsstrahlung emission in high density plasmas is removed, can be attained in this case. The plasma heating cycles are identified for which the contribution of ICRH is used both to enter the H-regime and to optimize the time needed for ignition. The on going effort to set up a test ICRH facility is described. The initial results (2 km/sec) of the high speed pellet injection system developed for Ignitor and operated at Oak Ridge are reported. The combined structural analysis and integration of the entire machine core (Load Assembly) is discussed. The adopted control system for both the machine and the plasma column has been designed and is described. The design solutions of the vertical field coils made of MgB2 and operating at 10 K have been identified and the relevant R&D program is underway. The analysis of the Caorso site and of its facility for the operation of the Ignitor with approved safety standards is completed. The relevant results are being made available for the operation of Ignitor at the Triniti site within the framework of the Italy-Russia agreement on the joint construction and operation of the Ignitor facility. A development effort concerning the advanced diagnostic systems that is being carried out for fusion burning plasma regimes is described. An initial analysis of the characteristics of a neutron source based on a system of Ignitor-like machines is reported

La riforma della teoria architettonica: il Trattato di Sebastiano Serlio

Il Trattato di architettura di Sebastiano Serlio ha suscitato giudizi discordi sia tra i suoi contemporanei che nella storia successiva fino quasi ai giorni nostri. Rifiutando il tradizionale approccio assiomatico vitruviano e albertiano, l'opera serliana tratteggia il tipo del moderno manuale illustrato.Il tono asciutto e l'approccio pragmatico consegnano il Trattato ad una platea di lettori vasta ed eterogenea; l'immediatezza didattica basata sulle immagini e il vasto repertorio di esempi ne fanno strumento prezioso per tecnici e dilettanti. Il Libro IV, di primaria importanza nell'economia del trattato, espone le Regole generali di architettura, ovvero la teoria degli ordini architettonici attualizzata alla luce delle esperienze dei più alti interpreti rinascimentali, da Bramante a Raffaello. Pubblicato a Venezia nel 1537, esso doveva fornire ad architetti e committenti veneti le chiavi della "bella maniera" degli antichi