27 research outputs found
Combined simulation of fatigue crack nucleation and propagation based on a damage indicator
Fatigue considerations often distinguish between fatigue crack nucleation and fatigue crack propagation. The current work presents a modeling approach utilizing one Fatigue Damage Indicator to treat both in a unified way. The approach is implemented within the framework of the Finite Element Method. Multiaxial critical plane models with an extended damage accumulation are employed as Fatigue Indicators. Locations of fatigue crack emergence are predicted by these indicators and material degradation is utilized to model local material failure. The cyclic loading is continued on the now degraded structure and the next location prone to material failure is identified and degradation modeled. This way, fatigue crack propagation is represented by an evolving spatial zone of material failure. This propagating damage zone leads to a changing structural response of the pristine structure. By recourse to the Fatigue Damage Indicator a correlation between the number of applied load cycles and the changing structural behavior is established. Finally, the proposed approach is exemplified by cyclic bending experiments in the Low Cycle Fatigue regime
Mechanisms and consequences of TGF-ß overexpression by podocytes in progressive podocyte disease
In patients with progressive podocyte disease, such as focal segmental glomerulosclerosis (FSGS) and membranous nephropathy, upregulation of transforming growth factor-ß (TGF-ß) is observed in podocytes. Mechanical pressure or biomechanical strain in podocytopathies may cause overexpression of TGF-ß and angiotensin II (Ang II). Oxidative stress induced by Ang II may activate the latent TGF-ß, which then activates Smads and Ras/extracellular signal-regulated kinase (ERK) signaling pathways in podocytes. Enhanced TGF-ß activity in podocytes may lead to thickening of the glomerular basement membrane (GBM) by overproduction of GBM proteins and impaired GBM degradation in podocyte disease. It may also lead to podocyte apoptosis and detachment from the GBM, and epithelial-mesenchymal transition (EMT) of podocytes, initiating the development of glomerulosclerosis. Furthermore, activated TGF-ß/Smad signaling by podocytes may induce connective tissue growth factor and vascular endothelial growth factor overexpression, which could act as a paracrine effector mechanism on mesangial cells to stimulate mesangial matrix synthesis. In proliferative podocytopathies, such as cellular or collapsing FSGS, TGF-ß-induced ERK activation may play a role in podocyte proliferation, possibly via TGF-ß-induced EMT of podocytes. Collectively, these data bring new mechanistic insights into our understanding of the TGF-ß overexpression by podocytes in progressive podocyte disease
An anisotropic linear thermo-viscoelastic constitutive law: Elastic relaxation and thermal expansion creep in the time domain
A constitutive material law for linear thermo-viscoelasticity in the time domain is presented. The time-dependent relaxation formulation is given for full anisotropy, i.e., both the elastic and the viscous properties are anisotropic. Thereby, each element of the relaxation tensor is described by its own and independent Prony series expansion. Exceeding common viscoelasticity, time-dependent thermal expansion relaxation/creep is treated as inherent material behavior. The pertinent equations are derived and an incremental, implicit time integration scheme is presented. The developments are implemented into an implicit FEM software for orthotropic material symmetry under plane stress assumption. Even if this is a reduced problem, all essential features are present and allow for the entire verification and validation of the approach. Various simulations on isotropic and orthotropic problems are carried out to demonstrate the material behavior under investigation
Combined simulation of fatigue crack nucleation and propagation based on a damage indicator
Fatigue considerations often distinguish between fatigue crack nucleation and fatigue crack propagation. The current work presents a modeling approach utilizing one Fatigue Damage Indicator to treat both in a unified way. The approach is implemented within the framework of the Finite Element Method. Multiaxial critical plane models with an extended damage accumulation are employed as Fatigue Indicators. Locations of fatigue crack emergence are predicted by these indicators and material degradation is utilized to model local material failure. The cyclic loading is continued on the now degraded structure and the next location prone to material failure is identified and degradation modeled. This way, fatigue crack propagation is represented by an evolving spatial zone of material failure. This propagating damage zone leads to a changing structural response of the pristine structure. By recourse to the Fatigue Damage Indicator a correlation between the number of applied load cycles and the changing structural behavior is established. Finally, the proposed approach is exemplified by cyclic bending experiments in the Low Cycle Fatigue regim
Modeling and simulation of anisotropic linear viscoelasticity: Direction dependent time–temperature-shift functions
A constitutive material law for linear viscoelasticity in the time domain is presented. It does not only allow for anisotropic elastic behavior but also for anisotropic (i.e. direction dependent) relaxation response. Under the assumption of thermo–rheological simple material behavior, the model is capable to account for direction dependent time–temperature-shift functions. The application is demonstrated for a linear viscoelastic matrix material reinforced by linear viscoelastic continuous fibers. The effective orthotropic linear viscoelastic response of the composite is computed by means of a periodic unit cell approach. These data, evaluated at different temperatures, are used to calibrate the input for the developed material law. Predictions from the latter are compared to the results from the unit cell simulations
Rôle vecteur des diptères chez les chevaux
L'auteur a réalisé une étude bibliographique portant sur la transmission par les diptères de maladies aux chevaux. Les caractéristiques biologiques des diptères impliqués sont présentées et l'accent est mis sur leur appareil buccal.NANTES-Ecole Nat.Vétérinaire (441092302) / SudocSudocFranceF
An Incremental Mori-Tanaka Homogenization Scheme for Finite Strain Thermoelastoplasticity of MMCs
The present paper aims at computational simulations of particle reinforced Metal Matrix Composites as well as parts and specimens made thereof. An incremental Mori-Tanaka approach with isotropization of the matrix tangent operator is adopted. It is extended to account for large strains by means of co-rotational Cauchy stresses and logarithmic strains and is implemented into Finite Element Method software as constitutive material law. Periodic unit cell predictions in the finite strain regime are used to verify the analytical approach with respect to non-proportional loading scenarios and assumptions concerning finite strain localization. The response of parts made of Metal Matrix Composites is predicted by a multiscale approach based on these two micromechanical methods. Results for the mesoscopic stress and strain fields as well as the microfields are presented to demonstrate to capabilities of the developed methods