Pulsar Wind Nebulae with Bow Shocks: Non-thermal Radiation and Cosmic Ray Leptons

Pulsars with high spin-down power produce relativistic winds radiating a non-negligible fraction of this power over the whole electromagnetic range from radio to gamma-rays in the pulsar wind nebulae (PWNe). The rest of the power is dissipated in the interactions of the PWNe with the ambient interstellar medium (ISM). Some of the PWNe are moving relative to the ambient ISM with supersonic speeds producing bow shocks. In this case, the ultrarelativistic particles accelerated at the termination surface of the pulsar wind may undergo reacceleration in the converging flow system formed by the plasma outflowing from the wind termination shock and the plasma inflowing from the bow shock. The presence of magnetic perturbations in the flow, produced by instabilities induced by the accelerated particles themselves, is essential for the process to work. A generic outcome of this type of reacceleration is the creation of particle distributions with very hard spectra, such as are indeed required to explain the observed spectra of synchrotron radiation with photon indices Γ≲ 1.5. The presence of this hard spectral component is specific to PWNe with bow shocks (BSPWNe). The accelerated particles, mainly electrons and positrons, may end up containing a substantial fraction of the shock ram pressure. In addition, for typical ISM and pulsar parameters, the e+ released by these systems in the Galaxy are numerous enough to contribute a substantial fraction of the positrons detected as cosmic ray (CR) particles above few tens of GeV and up to several hundred GeV. The escape of ultrarelativistic particles from a BSPWN—and hence, its appearance in the far-UV and X-ray bands—is determined by the relative directions of the interstellar magnetic field, the velocity of the astrosphere and the pulsar rotation axis. In this respect we review the observed appearance and multiwavelength spectra of three different types of BSPWNe: PSR J0437-4715, the Guitar and Lighthouse nebulae, and Vela-like objects. We argue that high resolution imaging of such objects provides unique information both on pulsar winds and on the ISM. We discuss the interpretation of imaging observations in the context of the model outlined above and estimate the BSPWN contribution to the positron flux observed at the Earth

Chemical modification of polymeric fibers for reinforcement of calcium phosphate bone cements

Contains fulltext : 230410.pdf (publisher's version ) (Open Access)Radboud University, 25 januari 2021Promotor : Leeuwenburgh, S.C.G.220 p

The Use of Fibers in Bone Tissue Engineering

Bone tissue engineering aims to restore and maintain the function of bone by means of biomaterial-based scaffolds. This review specifically focuses on the use of fibers in biomaterials used for bone tissue engineering as suitable environment for bone tissue repair and regeneration. We present a bioinspired rationale behind the use of fibers in bone tissue engineering and provide an overview of the most common fiber fabrication methods, including solution, melt, and microfluidic spinning. Subsequently, we provide a brief overview of the composition of fibers that are used in bone tissue engineering, including fibers composed of (i) natural polymers (e.g., cellulose, collagen, gelatin, alginate, chitosan, and silk, (ii) synthetic polymers (e.g., polylactic acid [PLA], polycaprolactone, polyglycolic acid [PGA], polyethylene glycol, and polymer blends of PLA and PGA), (iii) ceramic fibers (e.g., aluminium oxide, titanium oxide, and zinc oxide), (iv) metallic fibers (e.g., titanium and its alloys, copper and magnesium), and (v) composite fibers. In addition, we review the most relevant fiber modification strategies that are used to enhance the (bio)functionality of these fibers. Finally, we provide an overview of the applicability of fibers in biomaterials for bone tissue engineering, with a specific focus on mechanical, pharmaceutical, and biological properties of fiber-functionalized biomaterials for bone tissue engineering. Impact statement Natural bone is a complex composite material composed of an extracellular matrix of mineralized fibers containing living cells and bioactive molecules. Consequently, the use of fibers in biomaterial-based scaffolds offers a wide variety of opportunities to replicate the functional performance of bone. This review provides an overview of the use of fibers in biomaterials for bone tissue engineering, thereby contributing to the design of novel fiber-functionalized bone-substituting biomaterials of improved functionality regarding their mechanical, pharmaceutical, and biological properties

Interfacial characterization of poly (vinyl alcohol) fibers embedded in a calcium phosphate cement matrix: An experimental and numerical investigation

Item does not contain fulltex

Fiber-reinforced colloidal gels as injectable and moldable biomaterials for regenerative medicine

Item does not contain fulltex

Micro- and macromechanical characterization of the influence of surface-modification of poly(vinyl alcohol) fibers on the reinforcement of calcium phosphate cements

Contains fulltext : 220688.pdf (Publisher’s version ) (Open Access)Calcium phosphate cements (CPCs) are frequently used as synthetic bone substitute materials due to their favorable osteocompatibility and handling properties. However, CPCs alone are inherently brittle and exhibit low strength and toughness, which restricts their clinical applicability to non-load bearing sites. Mechanical reinforcement of CPCs using fibers has proven to be an effective strategy to toughen these cements by transferring stress from the matrix to the fibers through frictional sliding at the interface. Therefore, tailoring the fiber-matrix affinity is paramount in designing highly toughened CPCs. However, the mechanistic correlation between this interaction and the macromechanical properties of fiber-reinforced CPCs has hardly been investigated to date. The aim of this study was to tailor the fiber-matrix interface affinity by modifying the surface of poly(vinyl alcohol) (PVA) fibers and correlate their interfacial properties to macromechanical properties (i.e. fracture toughness, work-of-fracture and tensile strength) of CPCs. Results from single fiber pullout tests reveal that the surface modification of PVA fibers increased their hydrophilicity and improved their affinity to the CPC matrix. This observation was evidenced by an increase in the interfacial shear strength and a reduction in the critical fiber embedment length (i.e. maximum embedded length from which a fiber can be pulled out without rupture). This increased interface affinity facilitated energy dissipation during fracture of CPCs subjected to macromechanical three-point flexure and tensile tests. The fracture toughness also significantly improved, even for CPCs reinforced with fibers of lengths greater than their critical fiber embedment length, suggesting that other crack-arresting mechanisms also play an important role in mechanically reinforcing CPCs. Overall, these basic insights will improve the understanding of the correlation between micro- and macromechanical characteristics of fiber-reinforced CPCs

Surface functionalization of polylactic acid fibers with alendronate groups does not improve the mechanical properties of fiber-reinforced calcium phosphate cements

Item does not contain fulltex

Polyester fibers can be rendered calcium phosphate-binding by surface functionalization with bisphosphonate groups.

Item does not contain fulltextFibers are often used as structural elements to improve the mechanical properties of materials such as brittle ceramic matrices by facilitating the dissipation of energy. However, this energy dissipation is mainly controlled by the interface between the two components, and a poorly designed fiber-matrix interface strongly reduces the efficacy of fiber reinforcement. Here, we present a versatile approach to control the affinity of biocompatible fibers to calcium-containing matrices to maximize the efficacy of reinforcement of calcium phosphates-based bioceramics by means of polymeric fibers. To this end, polyester fibers of tunable length were produced by electrospinning and aminolysis, followed by covalent attachment of alendronate, a bisphosphonate molecule with strong calcium-binding affinity, to the surface of the fibers. The proposed method allowed for selective control over the amount of alendronate conjugation, thereby improving the affinity of polyester fibers toward calcium phosphate bioceramics. (c) 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 2335-2342, 2017.1 augustus 201