301 research outputs found
Thermal-mechanical fatigue test apparatus for metal matrix composites and joint attachments
Two thermal-mechanical fatigue (TMF) test facilities were designed and developed, one to test tungsten fiber reinforced metal matrix composite specimens at temperature up to 1430C (2600F) and another to test composite/metal attachment bond joints at temperatures up to 760C (1400 F). The TMF facility designed for testing tungsten fiber reinforced metal matrix composites permits test specimen temperature excursions from room temperature to 1430C (2600F) with controlled heating and loading rates. A strain-measuring device measures the strain in the test section of the specimen during each heating and cooling cycle with superimposed loads. Data is collected and recorded by a computer. The second facility is designed to test composite/metal attachment bond joints and to permit heating to a maximum temperature of 760C (1400F) within 10 min and cooling to 150C (300F) within 3 min. A computer controls specimen temperature and load cycling
Tungsten fiber-reinforced nickel superalloy
Tungsten fiber-reinforced nickel superalloy combines the strength of refractory metals with the oxidation resistance of superalloys. Knowledge of the relationship between fabrication technique, matrix compositions and fiber sizes minimized fiber-matrix reaction. Potential application includes high temperature turbine components
Predicted inlet gas temperatures for tungsten fiber reinforced superalloy turbine blades
Tungsten fiber reinforced superalloy composite (TFRS) impingement cooled turbine blade inlet gas temperatures were calculated taking into account material spanwise strength, thermal conductivity, material oxidation resistance, fiber-matrix interaction, and coolant flow. Measured values of TFRS thermal conductivities are presented. Calculations indicate that blades made of 30 volume percent fiber content TFRS having a 12,000 N-m/kg stress-to-density ratio while operating at 40 atmospheres and a 0.06 coolant flow ratio could permit a turbine blade inlet gas temperature of over 1900K. This is more than 150K greater than similar superalloy blades
Reinforced metallic composites Patent
High strength reinforced metallic composites for applications over wide temperature rang
Sustainability assessment of organic dairy farms in mountainous areas of Austria
Dairy farming plays a major role in mountainous regions of Austria, mostly due to high proportion of grasslands. In general, Austria’s dairy farming faces challenges regarding sustainability, e.g. environmental impacts, but specifically for alpine areas low productivity and dependency on direct payments are lowering sustainability. Organic farming is considered as a strategy to overcome these challenges.
Considering this general background, we analysed the sustainability performance and its main drivers of organic dairy farms in mountainous regions of Austria
Recommended from our members
Status of the TRIGA shipments to the INEEL from Asia
This paper will report on preparations being made for returning Training, Research, Isotope, General Atomics (TRIGA) foreign research reactor (FRR) spent fuel from South Korea and Indonesia to the Idaho National Engineering and Environmental Laboratory (INEEL). The roles of US Department of Energy, INEEL, and NAC International in implementing a safe shipment are provided. Special preparations necessitated by making a shipment through a west coast port of the US to the INEEL will be explained. The institutional planning and actions needed to meet the unique political and operational environment for making a shipment from Asia to INEEL will be discussed. Facility preparation at both the INEEL and the FRRs is discussed. Cask analysis needed to properly characterize the various TRIGA configurations, compositions, and enrichments is discussed. Shipping preparations will include an explanation of the integrated team of spent fuel transportation specialists, and shipping resources needed to retrieve the fuel from foreign research reactor sites and deliver it to the INEEL
Alignment between PIN1 Polarity and Microtubule Orientation in the Shoot Apical Meristem Reveals a Tight Coupling between Morphogenesis and Auxin Transport
Morphogenesis during multicellular development is regulated by intercellular signaling molecules as well as by the mechanical properties of individual cells. In particular, normal patterns of organogenesis in plants require coordination between growth direction and growth magnitude. How this is achieved remains unclear. Here we show that in Arabidopsis thaliana, auxin patterning and cellular growth are linked through a correlated pattern of auxin efflux carrier localization and cortical microtubule orientation. Our experiments reveal that both PIN1 localization and microtubule array orientation are likely to respond to a shared upstream regulator that appears to be biomechanical in nature. Lastly, through mathematical modeling we show that such a biophysical coupling could mediate the feedback loop between auxin and its transport that underlies plant phyllotaxis
Light can rescue auxin-dependent synchrony of cell division in a tobacco cell line
Pattern formation in plants has to cope with ambient variability and therefore must integrate environmental cues such as light. Synchrony of cell divisions was previously observed in cell files of tobacco suspension cultures, which represents a simple case of pattern formation. To develop cellular approaches for light-dependent patterning, light-responsive tobacco cell lines were screened from the cell line Nicotiana tabacum L. cv. Virginia Bright Italia 0 (VBI-0). The light responsive and auxin-autonomous cell line VBI-3 was isolated. As in the progenitor line VBI-0, cell divisions are synchronized in VBI-3 during exponential growth phase. This synchrony can be inhibited by 1-N-naphthylphthalamic acid, an auxin transport inhibitor, and this process was accompanied by the disassembly of actin filaments. However, the synchrony could be rescued when the cells were cultured under white light or with exogenous indolyl-3-acetic acid. The rescue was most efficient for continuous far-red light followed by continuous blue light, whereas continuous red light was least effective. These findings are discussed in the context of phytochrome-induced auxin biosynthesis and auxin-dependent synchrony of cell division
Quantitative predictions on auxin-induced polar distribution of PIN proteins during vein formation in leaves
The dynamic patterning of the plant hormone auxin and its efflux facilitator
the PIN protein are the key regulator for the spatial and temporal organization
of plant development. In particular auxin induces the polar localization of its
own efflux facilitator. Due to this positive feedback auxin flow is directed
and patterns of auxin and PIN arise. During the earliest stage of vein
initiation in leaves auxin accumulates in a single cell in a rim of epidermal
cells from which it flows into the ground meristem tissue of the leaf blade.
There the localized auxin supply yields the successive polarization of PIN
distribution along a strand of cells. We model the auxin and PIN dynamics
within cells with a minimal canalization model. Solving the model analytically
we uncover an excitable polarization front that triggers a polar distribution
of PIN proteins in cells. As polarization fronts may extend to opposing
directions from their initiation site we suggest a possible resolution to the
puzzling occurrence of bipolar cells, such we offer an explanation for the
development of closed, looped veins. Employing non-linear analysis we identify
the role of the contributing microscopic processes during polarization.
Furthermore, we deduce quantitative predictions on polarization fronts
establishing a route to determine the up to now largely unknown kinetic rates
of auxin and PIN dynamics.Comment: 9 pages, 4 figures, supplemental information included, accepted for
publication in Eur. Phys. J.
A novel, cellulose synthesis inhibitory action of ancymidol impairs plant cell expansion
The co-ordination of cell wall synthesis with plant cell expansion is an important topic of contemporary plant biology research. In studies of cell wall synthesis pathways, cellulose synthesis inhibitors are broadly used. It is demonstrated here that ancymidol, known as a plant growth retardant primarily affecting gibberellin biosynthesis, is also capable of inhibiting cellulose synthesis. Its ability to inhibit cellulose synthesis is not related to its anti-gibberellin action and possesses some unique features never previously observed when conventional cellulose synthesis inhibitors were used. It is suggested that ancymidol targets the cell wall synthesis pathway at a regulatory step where cell wall synthesis and cell expansion are coupled. The elucidation of the ancymidol target in plant cells could potentially contribute to our understanding of cell wall synthesis and cell expansion control
- …