30,750 research outputs found
Rotorcraft digital advanced avionics system (RODAAS) functional description
A functional design of a rotorcraft digital advanced avionics system (RODAAS) to transfer the technology developed for general aviation in the Demonstration Advanced Avionics System (DAAS) program to rotorcraft operation was undertaken. The objective was to develop an integrated avionics system design that enhances rotorcraft single pilot IFR operations without increasing the required pilot training/experience by exploiting advanced technology in computers, busing, displays and integrated systems design. A key element of the avionics system is the functionally distributed architecture that has the potential for high reliability with low weight, power and cost. A functional description of the RODAAS hardware and software functions is presented
Volume-reflecting dielectric heat shield
White, volume-reflecting dielectric material absorbs essentially none of the incident radiant energy, and continues to reflect even though in severe environment its surface is melted and is being vaporized. Process of overall reflectance in dielectric material, involving internal refractions and reflections, is similar to process of reflection in paints
Review of solar fuel-producing quantum conversion processes
The status and potential of fuel-producing solar photochemical processes are discussed. Research focused on splitting water to produce dihydrogen and is at a relatively early stage of development. Current emphasis is primarily directed toward understanding the basic chemistry underlying such quantum conversion processes. Theoretical analyses by various investigators predict a limiting thermodynamic efficiency of 31% for devices with a single photosystem operating with unfocused sunlight at 300 K. When non-idealities are included, it appears unlikely that actual devices will have efficiencies greater than 12 to 15%. Observed efficiencies are well below theoretical limits. Cyclic homogeneous photochemical processes for splitting water have efficiencies considerably less than 1%. Efficiency can be significantly increased by addition of a sacrificial reagent; however, such systems are no longer cyclic and it is doubtful that they would be economical on a commercial scale. The observed efficiencies for photoelectrochemical processes are also low but such systems appear more promising than homogeneous photochemical systems. Operating and systems options, including operation at elevated temperature and hybrid and coupled quantum-thermal conversion processes, are also considered
Solar photochemical process engineering for production of fuels and chemicals
The engineering costs and performance of a nominal 25,000 scmd (883,000 scfd) photochemical plant to produce dihydrogen from water were studied. Two systems were considered, one based on flat-plate collector/reactors and the other on linear parabolic troughs. Engineering subsystems were specified including the collector/reactor, support hardware, field transport piping, gas compression equipment, and balance-of-plant (BOP) items. Overall plant efficiencies of 10.3 and 11.6% are estimated for the flat-plate and trough systems, respectively, based on assumed solar photochemical efficiencies of 12.9 and 14.6%. Because of the opposing effects of concentration ratio and operating temperature on efficiency, it was concluded that reactor cooling would be necessary with the trough system. Both active and passive cooling methods were considered. Capital costs and energy costs, for both concentrating and non-concentrating systems, were determined and their sensitivity to efficiency and economic parameters were analyzed. The overall plant efficiency is the single most important factor in determining the cost of the fuel
Agricultural aviation user requirement priorities
The results are given of a research project pertaining to the development of agricultural aviation user requirement priorities. The raw data utilized in the project was obtained from the National Agricultural Aviation Association. A specially configured poll, developed by the Actuarial Research Corporation was used to solicit responses from NAAA members and others. The primary product of the poll is the specification of seriousness as determined by the respondents for some selected agricultural aviation problem areas identified and defined during the course of an intensive analysis by the Actuarial Research Corporation
Principal sources and dispersal patterns of suspended particulate matter in nearshore surface waters of the northeast Pacific Ocean and the Hawaiian Islands
The author has identified the following significant results. ERTS-1 multispectral scanner imagery of the nearshore surface waters of the Northeast Pacific Ocean is proving to be a useful tool for determining source and dispersal of suspended particulate matter. The principal sources of the turbid water, seen best on the green and red bands, are river and stream effluents and actively eroding coastlines; secondary sources are waste effluents and production of planktonic organisms, but these may sometimes be masked by the very turbid plumes of suspended sediment being discharged into the nearshore zone during times of high river discharge. The configuration and distribution of the plumes of turbid water also can be used to infer near-surface current directions. Comparison of imagery of the nearshore water off the northern California coast from October 1972 and January 1973 shows a reversal of the near-surface currents, from predominantly south-setting in the fall (California Current) to north-setting in the winter (Davidson Current)
The temperature structure in the core of Sersic 159-03
We present results from a new 120 ks XMM-Newton observation of the cluster of
galaxies Sersic 159-03. In this paper we focus on the high-resolution X-ray
spectra obtained with the Reflection Grating Spectrometer (RGS). The spectra
allow us to constrain the temperature structure in the core of the cluster and
determine the emission measure distribution as a function of temperature. We
also fit the line widths of mainly oxygen and iron lines.Comment: 7 pages and 4 figures. Contribution to the proceedings of the COSPAR
Scientific Assembly, session E1.2 "Clusters of Galaxies: New Insights from
XMM-Newton, Chandra and INTEGRAL", july 2004, Paris (France). Accepted for
publication in Advances in Space Researc
Diagnostics of the structure of AGN's broad line regions with reverberation mapping data: confirmation of the two-component broad line region model
We re-examine the ten Reverberation Mapping (RM) sources with public data
based on the two-component model of the Broad Line Region (BLR). In fitting
their broad H-beta lines, six of them only need one Gaussian component, one of
them has a double-peak profile, one has an irregular profile, and only two of
them need two components, i.e., a Very Broad Gaussian Component (VBGC) and an
Inter-Mediate Gaussian Component (IMGC). The Gaussian components are assumed to
come from two distinct regions in the two-component model; they are Very Broad
Line Region (VBLR) and Inter-Mediate Line region (IMLR). The two sources with a
two-component profile are Mrk 509 and NGC 4051. The time lags of the two
components of both sources satisfy ,
where and are the lags of the two components while
and represent the mean gas velocities of the two regions,
supporting the two-component model of the BLR of Active Galactic Nuclei (AGN).
The fact that most of these ten sources only have the VBGC confirms the
assumption that RM mainly measures the radius of the VBLR; consequently, the
radius obtained from the R-L relationship mainly represent the radius of VBLR.
Moreover, NGC 4051, with a lag of about 5 days in the one component model, is
an outlier on the R-L relationship as shown in Kaspi et al. (2005); however
this problem disappears in our two-component model with lags of about 2 and 6
days for the VBGC and IMGC, respectively.Comment: 7 pages, 5 figures. Accepted for publication in the Special Issue of
Science in China (G) "Astrophysics of Black holes and Related Compact
Objects
Brand Information Mitigating Negative Shocks on Animal Welfare: Is It More Effective to “Distract†Consumers or Make Them Aware?
To create and sustain a competitive advantage in markets that increasingly value animal welfare attributes, meat companies need to meet public and private production standards while communicating to final consumers through their brands. Data are collected from a representative sample of 460 U.S. residents through an on-line experiment on McDonald’s chicken breast sandwiches and analyzed with Latent Growth Modeling. This study assesses which content of positive brand information effectively mitigates the risk of negative information shocks on animal welfare. On average, brand information has the same positive impact on consumers’ beliefs and attitudes, regardless of whether it is related or unrelated to animal welfare. However, there is strong market segmentation in terms of consumers’ response when exposed to brand information, suggesting that brand managers would benefit from tailoring brand information according to consumers’ age, education, gender and income.animal welfare, brand, information, consumer behavior, multivariate statistics, Agribusiness, Livestock Production/Industries, Q1,
- …