FOREGS geochemical baseline mapping programme - a new European wide database and geochemical atlas.

Proceedings, Bologn

EuroGeoSurveys geochemical mapping of agricultural and grazing land soil of Europe (GEMAS). Field manual.

REACH (Registration, Evaluation and Authorisation of Chemicals), the new European Chemicals Regulation was adopted in December 2006. It came into force on the 1st June 2007. REACH, as well as the pending EU Soil Protection Directive, require additional knowledge about "soil quality" at the European scale. The GEMAS (geochemical mapping of agricultural soils and grazing land of Europe) project aims at providing harmonized geochemical data of arable land and land under permanent grass cover at the continental, European scale. Geological Surveys in 34 European countries, covering an area of 5.6 million km2, have agreed to sample their territory at a sample density of 1 site each, arable land (0-20 cm) and land under permanent grass cover (0-10 cm), per 2500 km2. Sampling will take place during 2008, following a jointly agreed field protocol which is presented in this report. All samples will be prepared in just one laboratory, a strict quality control procedure has been established and all samples will always be jointly analyzed in just one laboratory for any one chemical element/parameter

The EuroGeoSurveys geochemical mapping of agricultural and grazing land soils project (GEMAS) - Evaluation of quality control results of aqua regia extraction analysis.

Rigorous quality control (QC) is one of the keystones to the success of any regional geochemical mapping programme. For the EuroGeoSurveys (EGS) GEMAS (Geochemical mapping of agricultural and grazing land soils) project 2211 samples (including field duplicates) of agricultural soil (Ap, Ap-horizon, 0-20 cm) and 2118 samples (including field duplicates) from land under permanent grass cover ("grazing land" - Gr, topsoil 0-10 cm) were collected from a large part of Europe, centrally prepared (air dried, sieved to <2 mm, homogenised and split into sub-samples) and randomised prior to being sent out to contract laboratories. QC consisted of (1) collection of a field duplicate at a rate of 1 in 20 field samples, (2) preparation of two large project standards ("Ap" and "Gr") for insertion between the routine project samples, (3) preparation of an analytical replicate from each field duplicate and (4) randomisation of all samples prior to analysis. Here QC-results covering analysis of 53 chemical elements (Ag, Al, As, Au, B, Ba, Be, Bi, Ca, Cd, Ce, Co, Cr, Cs, Cu, Fe, Ga, Ge, Hf, Hg, In, K, La, Li, Mg, Mn, Mo, Na, Nb, Ni, P, Pb, Pd, Pt, Rb, Re, S, Sb, Sc, Se, Sn, Sr, Ta, Te, Th, Ti, Tl, U, V, W, Y, Zn, Zr), following an aqua regia extraction on a 15 g aliquot per sample of both sample materials, are reported. Practical detection limits and precision, as well as the analytical results for the two project standards Ap and Gr are provided for all 53 elements. All analyses were carried out within twenty days at ACME laboratories in Vancouver, Canada. No serious quality problems, other than a few occasional outliers for a number of elements (B, Ca, and Sn) were detected, and the analytical results were accepted after investigating the reasons for these outliers

GEMAS: Geochemical background and mineral potential of emerging tech-critical elements in Europe revealed from low-sampling density geochemical mapping

The demand for ‘high-tech’ element resources (e.g., rare earth elements, lithium, platinum group elements) has increased with their continued consumption in developed countries and the emergence of developing economies. To provide a sound knowledge base for future generations, it is necessary to identify the spatial distribution of critical elements at a broad-scale, and to delineate areas for follow-up surveys. Subsequently, this knowledge can be used to study possible environmental consequences of the increased use of these resources. In this paper, three critical industrial elements (Sb, W, Li) from low-sampling density geochemical mapping at the continental-scale are presented. The geochemical distribution and spatial patterns have been obtained from agricultural soil samples (Ap-horizon, 0–20 cm; N = 2108 samples) collected at a density of 1 site per 2500 km2 and analysed by ICP-MS after a hot aqua regia digestion as part of the GEMAS (GEochemical Mapping of Agricultural and grazing land Soil) soil-mapping project in 33 European countries. Most of the geochemical maps show exclusively natural background element concentrations with minor, or without, anthropogenic influence. The maximum extent of the last glaciation is marked as a discrete element concentration break, and a distinct difference occurs in element concentration levels between the soil of northern and southern Europe, most likely an effect of soil genesis, age and weathering. The Sb, W and Li concentrations in soil provide a general overview of element spatial distribution in relation to complexity of the underlying bedrock and element mobility in the surface environment at the continental-scale. The chemical composition of agricultural soil represents largely the primary mineralogy of the source bedrock, the effects of pre- and post-depositional chemical weathering, formation of secondary products, such as clays, and element mobility, either by leaching or mineral sorting. Observed geochemical patterns of Li, W and Sb can be often linked with known mineralisation as recorded in the ProMine Mineral Database, where elements in question occur either as main or secondary resources. Anthropogenic impact has only been identified locally, predominantly in the vicinity of large urban agglomerations. Unexplained high element concentrations may potentially indicate new sources for high-tech elements and should be investigated at a more detailed scale

GEMAS: Source, distribution patterns and geochemical behaviour of Ge in agricultural and grazing land soils at European continental scale

Agricultural soil (Ap-horizon, 0–20 cm) and grazing land soil (Gr-horizon, 0–10 cm) samples were collected from a large part of Europe (33 countries, 5.6 million km2) as part of the GEMAS (GEochemical Mapping of Agricultural and grazing land Soil) soil mapping project. GEMAS soil data have been used to provide a general view of element mobility and source rocks at the continental scale, either by reference to average crustal abundances or to normalized patterns of element mobility during weathering processes. The survey area includes a diverse group of soil parent materials with varying geological history, a wide range of climate zones, and landscapes. The concentrations of Ge in European soil were determined by ICP-MS after an aqua extraction, and their spatial distribution patterns generated by means of a GIS software. The median values of Ge and its spatial distribution in Ap and Gr soils are almost the same (0.037 vs. 0.034 mg/kg, respectively). The majority of Ge anomalies is related to the type of soil parent material, namely lithology of the bedrock and minor influence of soil parameters such as pH, TOC and clay content. Metallogenic belts with sulphide mineralisation provide the primary source of Ge in soil in several regions in Europe, e.g. in Scandinavia, Germany, France, Spain and Balkan countries. Comparison with total Ge concentrations obtained from the Baltic Soil Survey shows that aqua regia is a very selective method with rather low-efficiency and cannot provide a complete explanation for Ge geochemical behaviour in soil. Additionally, large differences in Ge distribution are to be expected when different soil depth horizons are analysed

GEMAS: Geochemical distribution of Mg in agricultural soil of Europe

Agricultural soil (Ap-horizon, 0\u201320 cm) samples were collected from 33 European countries as part of the GEMAS (GEochemical Mapping of Agricultural and grazing land Soil) soil-mapping project. The Mg data derived from total concentrations (XRF) and two acid digestion methods, aqua regia (AR) and Mobile Metal Ion (MMI\uae), were used to provide an overview of its spatial distribution in soil at the continental-scale. Magnesium is one of the most abundant elements in the Earth's crust and essential nutrient for plants and animals and its presence in soil is, therefore, important for soil quality evaluation. In this study, the geochemical behaviour of Mg in European agricultural soil was investigated in relation to a variety of soil parent materials, climatic zones, and landscapes. The chemical composition of soil reflects mostly the primary mineralogy of the source bedrock, and the superimposed effects of pre- and post-depositional chemical weathering, controlled by element mobility and formation of secondary phases such as clays. Low Mg concentrations in agricultural soil occur in regions with quartz-rich glacial sediments (Poland, Baltic States, N. Germany), and in soil developed on quartz-rich sandstone parent materials (e.g., central Sweden). High Mg concentrations occur in soil developed over mafic lithologies such as ophiolite belts and in carbonate-rich regions, including karst areas. The maximum extent of the last glaciation is well defined by a Mg concentration break, which is marked by low Mg concentrations in Fennoscandia and north-central Europe, and high Mg concentrations in Mediterranean region. Lithology of parent materials seems to play a key role in the Mg nutritional status of agricultural soil at the European scale. Influence from agricultural practice and use of fertilisers appears to be subordinate. Comparison of the continental-scale spatial distribution of Mg in agricultural soil by using the results from three analytical methods (XRF, AR and MMI\uae) provides complementary information about Mg mobility and its residence time in soil. Thus, allowing evaluation of soil weathering grade and impact of land use exploitation

Gemas: Prediction of solid-solution phase partitioning coefficients (Kd) for oxoanions and boric acid in soils using mid-infrared diffuse reflectance spectroscopy

The authors’ aim was to developrapid and inexpensive regression models forthe prediction of partitioningcoefficients(Kd), definedastheratioofthetotalorsurface-boundmetal/metalloidconcentrationofthesolidphasetothetotalconcentrationinthesolution phase. Values of Kd were measured for boric acid (B[OH]30) and selected added soluble oxoanions: molybdate (MoO42–), antimonate (Sb[OH]6–), selenate (SeO42–), tellurate (TeO42–) and vanadate (VO43–). Models were developed using approximately 500 spectrally representativesoilsoftheGeochemicalMappingofAgriculturalSoilsofEurope(GEMAS)program.Thesecalibrationsoilsrepresented themajorpropertiesofthe entire4813 soilsoftheGEMASproject.Multiple linear regression(MLR)from soilproperties,partialleastsquares regression (PLSR) using mid-infrared diffuse reflectance Fourier-transformed (DRIFT) spectra, and models using DRIFT spectra plus analytical pH values (DRIFTþpH), were compared with predicted log Kdþ1 values. Apart from selenate (R2¼0.43), the DRIFTþpH calibrations resulted in marginally better models to predict log Kdþ1 values (R2¼0.62–0.79), compared with those from PSLR-DRIFT (R2¼0.61–0.72) and MLR (R2¼0.54–0.79). The DRIFTþpH calibrations were applied to the prediction of log Kdþ1 values in the remaining 4313 soils. An example map of predicted log Kdþ1 values for added soluble MoO42– in soils across Europe is presented.TheDRIFTþpHPLSRmodels providedarapidand inexpensivetool toassess theriskofmobilityand potentialavailability of boric acid and selected oxoanions in European soils. For these models to be used in the prediction of log Kdþ1 values in soils globally, additional research will be needed to determine if soil variability is accounted on the calibration