The effect of boundary constraints on finite element modelling of the human pelvis

The use of finite element analysis (FEA) to investigate the biomechanics of anatomical systems critically relies on the specification of physiologically representative boundary conditions. The biomechanics of the pelvis has been the specific focus of a number of FEA studies previously, but it is also a key aspect in other investigations of, for example, the hip joint or new design of hip prostheses. In those studies, the pelvis has been modelled in a number of ways with a variety of boundary conditions, ranging from a model of the whole pelvic girdle including soft tissue attachments to a model of an isolated hemi-pelvis. The current study constructed a series of FEA models of the same human pelvis to investigate the sensitivity of the predicted stress distributions to the type of boundary conditions applied, in particular to represent the sacro-iliac joint and pubic symphysis. Varying the method of modelling the sacro-iliac joint did not produce significant variations in the stress distribution, however changes to the modelling of the pubic symphysis were observed to have a greater effect on the results. Over-constraint of the symphysis prevented the bending of the pelvis about the greater sciatic notch, and underestimated high stresses within the ilium. However, permitting medio-lateral translation to mimic widening of the pelvis addressed this problem. These findings underline the importance of applying the appropriate boundary conditions to FEA models, and provide guidance on suitable methods of constraining the pelvis when, for example, scan data has not captured the full pelvic girdle. The results also suggest a valid method for performing hemi-pelvic modelling of cadaveric or archaeological remains which are either damaged or incomplete

The biomechanical function of periodontal ligament fibres in orthodontic tooth movement

Orthodontic tooth movement occurs as a result of resorption and formation of the alveolar bone due to an applied load, but the stimulus responsible for triggering orthodontic tooth movement remains the subject of debate. It has been suggested that the periodontal ligament (PDL) plays a key role. However, the mechanical function of the PDL in orthodontic tooth movement is not well understood as most mechanical models of the PDL to date have ignored the fibrous structure of the PDL. In this study we use finite element (FE) analysis to investigate the strains in the alveolar bone due to occlusal and orthodontic loads when PDL is modelled as a fibrous structure as compared to modelling PDL as a layer of solid material. The results show that the tension-only nature of the fibres essentially suspends the tooth in the tooth socket and their inclusion in FE models makes a significant difference to both the magnitude and distribution of strains produced in the surrounding bone. The results indicate that the PDL fibres have a very important role in load transfer between the teeth and alveolar bone and should be considered in FE studies investigating the biomechanics of orthodontic tooth movement. © 2014 McCormack et al

NCeSS Project : Data mining for social scientists

We will discuss the work being undertaken on the NCeSS data mining project, a one year project at the University of Manchester which began at the start of 2007, to develop data mining tools of value to the social science community. Our primary goal is to produce a suite of data mining codes, supported by a web interface, to allow social scientists to mine their datasets in a straightforward way and hence, gain new insights into their data. In order to fully define the requirements, we are looking at a range of typical datasets to find out what forms they take and the applications and algorithms that will be required. In this paper, we will describe a number of these datasets and will discuss how easily data mining techniques can be used to extract information from the data that would either not be possible or would be too time consuming by more standard methods

Broad-Scale Latitudinal Variation in Female Reproductive Success Contributes to the Maintenance of a Geographic Range Boundary in Bagworms (Lepidoptera: Psychidae)

Background: Geographic range limits and the factors structuring them are of great interest to biologists, in part because of concerns about how global change may shift range boundaries. However, scientists lack strong mechanistic understanding of the factors that set geographic range limits in empirical systems, especially in animals. Methodology/Principal Findings: Across dozens of populations spread over six degrees of latitude in the American Midwest, female mating success of the evergreen bagworm Thyridopteryx ephemeraeformis (Lepidoptera: Psychidae) declines from,100 % to,0 % near the edge of the species range. When coupled with additional latitudinal declines in fecundity and in egg and pupal survivorship, a spatial gradient of bagworm reproductive success emerges. This gradient is associated with a progressive decline in local abundance and an increased risk of local population extinction, up to a latitudinal threshold where extremely low female fitness meshes spatially with the species ’ geographic range boundary. Conclusions/Significance: The reduction in fitness of female bagworms near the geographic range limit, which concords with the abundant centre hypothesis from biogeography, provides a concrete, empirical example of how an Allee effect (increased pre-reproductive mortality of females in sparsely populated areas) may interact with other demographic factor

Masticatory biomechanics in the rabbit : a multi-body dynamics analysis

Acknowledgement We thank Sue Taft (University of Hull) for the µCT-scanning of the rabbit specimen used in this study. We also thank Raphaël Cornette, Jacques Bonnin, Laurent Dufresne, and l'Amicale des Chasseurs Trappistes (ACT) for providing permission and helping us capture the rabbits used for the in vivo bite force measurements at la Réserve Naturelle Nationale de St Quentin en Yvelines, France.Peer reviewedPublisher PD

A biomechanical analysis of prognathous and orthognathous insect head capsules: Evidence for a many to one mapping of ridge strain to head strain

Insect head shapes are remarkably variable but the influences of these changes on biomechanical performance are unclear. Among “basal” winged insects, such as dragonflies, mayflies, earwigs, and stoneflies, some of the most prominent anatomical changes are the general mouthpart orientation, eye size and the connection of the endoskeleton to the head. Here, we assess these variations for the first time using modern engineering methods including multibody dynamics modelling and finite element analysis in order to quantify and compare their influence on overall head performance. We show that a range of peculiar structures such as the genal/subgenal, epistomal, and circumoccular areas are consistently highly loaded in all species, despite drastically differing morphologies in species with forward projecting (prognathous) and downwards projecting (orthognathous) mouthparts. Sensitivity analyses show that the presence of eyes has a negligible influence on head capsule strain if a circumoccular ridge is present. In contrast, the connection of the dorsal endoskeletal arms to the head capsule especially affects overall head loading in species with downward projecting mouthparts. Analysis of the relative strains between species for each head region reveals that most head regions map onto a similar biomechanical performance space thus showing a many to one mapping of differing forms to the same functional space. Concerted changes in head substructures such as the subgenal area, the endoskeleton and the epistomal area lead to a consistent relative loading pattern in prognathous and orthognathous insects. It appears that biting-chewing loads are managed by a system of strengthening ridges on the head capsule irrespective of the general mouthpart and head orientation. Concerted changes in ridge and endoskeleton configuration allow more radical anatomical changes such as general mouthpart orientation which could be an explanation for the variability of this trait among insects. In an evolutionary context, many to one mapping of diverse forms to similar functions indeed could have fostered the dynamic diversification processes seen in insects

Inclusion of periodontal ligament fibres in mandibular finite element models leads to an increase in alveolar bone strains

Alveolar bone remodelling is vital for the success of dental implants and orthodontic treatments. However, the underlying biomechanical mechanisms, in particular the function of the periodontal ligament (PDL) in bone loading and remodelling, are not well understood. The PDL is a soft fibrous connective tissue that joins the tooth root to the alveolar bone and plays a critical role in the transmission of loads from the tooth to the surrounding bone. However, due to its complex structure, small size and location within the tooth socket it is difficult to study in vivo. Finite element analysis (FEA) is an ideal tool with which to investigate the role of the PDL, however inclusion of the PDL in FE models is complex and time consuming, therefore consideration must be given to how it is included. The aim of this study was to investigate the effects of including the PDL and its fibrous structure in mandibular finite element models. A high-resolution model of a human molar region was created from micro-computed tomography scans. This is the first time that the fibrous structure of the PDL has been included in a model with realistic tooth and bone geometry. The results show that omission of the PDL creates a more rigid model, reducing the strains observed in the mandibular corpus which are of interest when considering mandibular functional morphology. How the PDL is modelled also affects the strains. The inclusion of PDL fibres alters the strains in the mandibular bone, increasing the strains in the tooth socket compared to PDL modelled without fibres. As strains in the alveolar bone are thought to play a key role in bone remodelling during orthodontic tooth movement, future FE analyses aimed at improving our understanding and management of orthodontic treatment should include the fibrous structure of the PDL