L1 track finding for a time multiplexed trigger

At the HL-LHC, proton bunches will cross each other every 25. ns, producing an average of 140 pp-collisions per bunch crossing. To operate in such an environment, the CMS experiment will need a L1 hardware trigger able to identify interesting events within a latency of 12.5. μs. The future L1 trigger will make use also of data coming from the silicon tracker to control the trigger rate. The architecture that will be used in future to process tracker data is still under discussion. One interesting proposal makes use of the Time Multiplexed Trigger concept, already implemented in the CMS calorimeter trigger for the Phase I trigger upgrade. The proposed track finding algorithm is based on the Hough Transform method. The algorithm has been tested using simulated pp-collision data. Results show a very good tracking efficiency. The algorithm will be demonstrated in hardware in the coming months using the MP7, which is a μTCA board with a powerful FPGA capable of handling data rates approaching 1. Tb/s.This project has received funding from the European Union׳s Seventh Framework Programme for research, technological development and demonstration under grant agreement no. 317446

Deficiency in Protein Tyrosine Phosphatase PTP1B shortens lifespan and leads to development of acute leukemia

This work was performed with the funds from the Wellcome Trust ISSF grant to M. Delibegovic and BHF project grant to M. Delibegovic (PG/11/8/28703). S. Le Sommer is a recipient of the University of Aberdeen Institute of Medical Sciences PhD studentship. Conflict of interest: Authors declare there are no conflicts of interests.Peer reviewedPostprin

TOWARDS A PAN-EU BUILDING FOOTPRINT MAP BASED ON THE HIERARCHICAL CONFLATION OF OPEN DATASETS: THE DIGITAL BUILDING STOCK MODEL - DBSM

This paper presents a hierarchical conflation process applied to open datasets for the creation of a seamless pan-European map of building footprints in vector format, named Digital Building Stock Model – DBSM. The objective is the sequential addition of input components (which currently include OpenStreetMap, Microsoft GlobalML Building Footprints, European Settlement Map), taking into account their limitations, and aiming at the highest level of completeness possible, for planning and evaluating energy transition scenarios at the EU level. The results indicate how DBSM compares robustly against cadastral data from Estonia, used as reference area. The comparison of DBSM with GHS-BUILT-S, a 10 metres resolution grid with worldwide coverage that encodes the built-up surface in each pixel as derived from Sentinel-2 imagery for the year 2018, reveals a relative overestimation of the latter, factored by 0.68 at the EU scale for a sound match

Results from the CBC3 readout ASIC for CMS 2S-modules

The CBC3 is the latest version of the CMS Binary Chip for readout of the outer radial region of the upgraded CMS Tracker at the High Luminosity LHC. This 254-channel, 130 nm CMOS ASIC is designed to be bump-bonded to a substrate to which sensors will be wire-bonded. It will instrument double-layer 2S-modules, containing two overlaid silicon microstrip sensors, aligned with a parallel orientation. On-chip logic identifies Level-1 trigger primitives from high transverse-momentum tracks by selecting correlated clusters in the two sensors. The CBC3 was delivered in late 2016; wafer probing and performance tests have been carried out. Several prototype modules using the CBC3 have been produced and tested in the lab and in different beams. The results show that the CBC3 satisfies CMS requirements and only small corrections are needed for the final version of the chip for production

A subpopulation of itch-sensing neurons marked by Ret and somatostatin expression

Itch, the unpleasant sensation that elicits a desire to scratch, is mediated by specific subtypes of cutaneous sensory neuron. Here, we identify a subpopulation of itch-sensing neurons based on their expression of the receptor tyrosine kinase Ret. We apply flow cytometry to isolate Ret-positive neurons from dorsal root ganglia and detected a distinct population marked by low levels of Ret and absence of isolectin B4 binding. We determine the transcriptional profile of these neurons and demonstrate that they express neuropeptides such as somatostatin (Sst), the NGF receptor TrkA, and multiple transcripts associated with itch. We validate the selective expression of Sst using an Sst-Cre driver line and ablated these neurons by generating mice in which the diphtheria toxin receptor is conditionally expressed from the sensory neuron-specific Avil locus. Sst-Cre::AviliDTR mice display normal nociceptive responses to thermal and mechanical stimuli. However, scratching behavior evoked by interleukin-31 (IL-31) or agonist at the 5HT1F receptor is significantly reduced. Our data provide a molecular signature for a subpopulation of neurons activated by multiple pruritogens. Synopsis This study shows that a subset of DRG neurons expressing the tyrosine kinase Ret and somatostatin function as itch receptor and mediate 5HT1f receptor agonist-induced scratching in mice. Flow cytometric analysis of peripheral sensory neurons is used to isolate multiple Ret-positive subsets. Transcriptional profiling of sensory neurons with low levels of Ret and an absence of IB4 binding reveals co-expression of somatostatin (Sst), interleukin-31 (IL-31) and serotonin receptor 5HT1f. Ablation of Sst-positive neurons reduces scratching responses to IL-31 and 5HT1f agonists in vivo. This study shows that a subset of DRG neurons expressing the tyrosine kinase Ret and somatostatin function as itch receptor and mediate 5HT1f receptor agonist-induced scratching in mice

An FPGA-based track finder for the L1 trigger of the CMS experiment at the high luminosity LHC

A new tracking system is under development for operation in the CMS experiment at the High Luminosity LHC. It includes an outer tracker which will construct stubs, built by correlating clusters in two closely spaced sensor layers for the rejection of hits from low transverse momentum tracks, and transmit them off-detector at 40 MHz. If tracker data is to contribute to keeping the Level-1 trigger rate at around 750 kHz under increased luminosity, a crucial component of the upgrade will be the ability to identify tracks with transverse momentum above 3 GeV/c by building tracks out of stubs. A concept for an FPGA-based track finder using a fully time-multiplexed architecture is presented, where track candidates are identified using a projective binning algorithm based on the Hough Transform. A hardware system based on the MP7 MicroTCA processing card has been assembled, demonstrating a realistic slice of the track finder in order to help gauge the performance and requirements for a full system. This paper outlines the system architecture and algorithms employed, highlighting some of the first results from the hardware demonstrator and discusses the prospects and performance of the completed track finder

The UA9 experimental layout

The UA9 experimental equipment was installed in the CERN-SPS in March '09 with the aim of investigating crystal assisted collimation in coasting mode. Its basic layout comprises silicon bent crystals acting as primary collimators mounted inside two vacuum vessels. A movable 60 cm long block of tungsten located downstream at about 90 degrees phase advance intercepts the deflected beam. Scintillators, Gas Electron Multiplier chambers and other beam loss monitors measure nuclear loss rates induced by the interaction of the beam halo in the crystal. Roman pots are installed in the path of the deflected particles and are equipped with a Medipix detector to reconstruct the transverse distribution of the impinging beam. Finally UA9 takes advantage of an LHC-collimator prototype installed close to the Roman pot to help in setting the beam conditions and to analyze the efficiency to deflect the beam. This paper describes in details the hardware installed to study the crystal collimation during 2010.Comment: 15pages, 11 figure, submitted to JINS

Emulation of a prototype FPGA track finder for the CMS Phase-2 upgrade with the CIDAF emulation framework

The CMS collaboration is preparing a major upgrade of its detector, so it can operate during the high luminosity run of the LHC from 2026. The upgraded tracker electronics will reconstruct the trajectories of charged particles within a latency of a few microseconds, so that they can be used by the level-1 trigger. An emulation framework, CIDAF, has been developed to provide a reference for a proposed FPGA-based implementation of this track finder, which employs a Time-Multiplexed (TM) technique for data processing.The research leading to these results has received funding from the People Programme (Marie Curie Actions) of the European Unions Seventh Framework Programme FP7/2007- 2013/ under REA grant agreement n [317446] INFIERI “Intelligent Fast Interconnected and Efficient Devices for Frontier Exploitation in Research and Industry”. This work was supported in part by the the UK Science and Technology Facilities Council, we gratefully acknowledge their support

The contours of a new urban world? Megacity population growth and density since 1975

The problems posed by rapid and large-scale urbanisation are manifold, and are recognised in the UN’s New Urban Agenda; a declaration of intent that aims to meet such challenges head-on facilitated by the systematic tracking and analysis of global urban growth and change. In this context, the release in 2016 of new small area Global Human Settlement Layer (GHSL) data was said to represent a unique opportunity to facilitate comparative global analyses of urban change dynamics and, perhaps somewhat idealistically, move forward progressive planning agendas. We therefore focus on population growth and density in 30 major urban agglomerations using the GHSL in order to shed light on the scale and extent of global urbanisation over the past four decades and to interrogate the potential role of the GHSL in tracking urban change