Transfer of molybdenum disulfide to various metals

Sliding friction experiments were conducted with molybdenum disulfide single crystals in contact with sputter cleaned surfaces of copper, nickel, gold, and 304 stainless steel. Transfer of the molybdenum disulfide to the metals was monitored with Auger electron spectroscopy. Results of the investigation indicate molybdenum disulfide transfers to all clean metal surfaces after a single pass over the metal surface with film thickness observed to increase with repeated passes over the same surfaces. Large particle transfer occurs when the orientation of the crystallites is other than basal. This is frequently accompanied by abrasion of the metal. Adhesion of molybdenum disulfide films occurred readily to copper and nickel, less readily to 304 stainless steel, and even less effectively to the gold, which indicates a chemical effect

Opto-mechanical micro-macro entanglement

We propose to create and detect opto-mechanical entanglement by storing one component of an entangled state of light in a mechanical resonator and then retrieving it. Using micro-macro entanglement of light as recently demonstrated experimentally, one can then create opto-mechanical entangled states where the components of the superposition are macroscopically different. We apply this general approach to two-mode squeezed states where one mode has undergone a large displacement. Based on an analysis of the relevant experimental imperfections, the scheme appears feasible with current technology.Comment: 7 pages, 6 figures, to appear in PRL, submission coordinated with Sekatski et al. who reported on similar result

Design Methodology for Multi-Element High-Lift Systems on Subsonic Civil Transport Aircraft

The choice of a high-lift system is crucial in the preliminary design process of a subsonic civil transport aircraft. Its purpose is to increase the allowable aircraft weight or decrease the aircraft's wing area for a given takeoff and landing performance. However, the implementation of a high-lift system into a design must be done carefully, for it can improve the aerodynamic performance of an aircraft but may also drastically increase the aircraft empty weight. If designed properly, a high-lift system can improve the cost effectiveness of an aircraft by increasing the payload weight for a given takeoff and landing performance. This is why the design methodology for a high-lift system should incorporate aerodynamic performance, weight, and cost. The airframe industry has experienced rapid technological growth in recent years which has led to significant advances in high-lift systems. For this reason many existing design methodologies have become obsolete since they are based on outdated low Reynolds number wind-tunnel data and can no longer accurately predict the aerodynamic characteristics or weight of current multi-element wings. Therefore, a new design methodology has been created that reflects current aerodynamic, weight, and cost data and provides enough flexibility to allow incorporation of new data when it becomes available

Parallel quantized charge pumping

Two quantized charge pumps are operated in parallel. The total current generated is shown to be far more accurate than the current produced with just one pump operating at a higher frequency. With the application of a perpendicular magnetic field the accuracy of quantization is shown to be $<$20 ppm for a current of $108.9$pA. The scheme for parallel pumping presented in this work has applications in quantum information processing, the generation of single photons in pairs and bunches, neural networking and the development of a quantum standard for electrical current. All these applications will benefit greatly from the increase in output current without the characteristic decrease in accuracy as a result of high-frequency operation

Group treatments for sensitive health care problems : a randomised controlled trial of group versus individual physiotherapy sessions for female urinary incontinence

Background: The aim was to compare effectiveness of group versus individual sessions of physiotherapy in terms of symptoms, quality of life, and costs, and to investigate the effect of patient preference on uptake and outcome of treatment. Methods: A pragmatic, multi-centre randomised controlled trial in five British National Health Service physiotherapy departments. 174 women with stress and/or urge incontinence were randomised to receive treatment from a physiotherapist delivered in a group or individual setting over three weekly sessions. Outcome were measured as Symptom Severity Index; Incontinence-related Quality of Life questionnaire; National Health Service costs, and out of pocket expenses. Results: The majority of women expressed no preference (55%) or preference for individual treatment (36%). Treatment attendance was good, with similar attendance with both service delivery models. Overall, there were no statistically significant differences in symptom severity or quality of life outcomes between the models. Over 85% of women reported a subjective benefit of treatment, with a slightly higher rating in the individual compared with the group setting. When all health care costs were considered, average cost per patient was lower for group sessions (Mean cost difference £52.91 95%, confidence interval (£25.82 - £80.00)). Conclusion: Indications are that whilst some women may have an initial preference for individual treatment, there are no substantial differences in the symptom, quality of life outcomes or non-attendance. Because of the significant difference in mean cost, group treatment is recommended

Back gating of a two-dimensional hole gas in a SiGe quantum well

A device comprising a low-resistivity, n-type, Si substrate as a back gate to a p-type (boron), remote-doped, SiGe quantum well has been fabricated and characterized. Reverse and forward voltage biasing of the gate with respect to the two-dimensional hole gas in the quantum well allows the density of holes to be varied from 8 × 1011 cm–2 down to a measurement-limited value of 4 × 1011 cm–2. This device is used to demonstrate the evolution with decreasing carrier density of a re-entrant insulator state between the integer quantum Hall effect states with filling factors 1 and 3

Variables in Globular Cluster NGC 5024

We present the results of a commissioning campaign to observe Galactic globular clusters for the search of microlensing events. The central 10' X 10' region of the globular cluster NGC 5024 was monitored using the 2-m Himalayan Chandra Telescope in R-band for a period of about 8 hours on 24 March 2010. Light curves were obtained for nearly 10,000 stars, using a modified Difference Image Analysis (DIA) technique. We identified all known variables within our field of view and revised periods and status of some previously reported short-period variables. We report about eighty new variable sources and present their equatorial coordinates, periods, light curves and possible types. Out of these, 16 are SX Phe stars, 10 are W UMa-type stars, 14 are probable RR Lyrae stars and 2 are detached eclipsing binaries. Nine of the newly discovered SX Phe stars and two eclipsing binaries belong to the Blue Straggler Star (BSS) population.Comment: 29 pages, 22 figures, replaced with rewritten data reduction par