Removal of NOx from diesel generator exhaust by pulsed electron beams

The objective of this paper is to determine the effects of electron beam pulse parameters on the utilization of the reactive free radicals for removal of NO{sub x} from diesel generator exhaust. A dose per pulse less than 1 kGy has been determined to be optimum for effective radical utilization. During each post-pulse period, the radicals are utilized in the removal of NO{sub x} in a timescale of around 100 microseconds; thus, with pulse frequencies of around 10 kHz or less, the radical concentrations remain sufficiently low to prevent any significant competition between radical-pollutant and radical-radical reactions. It is shown that a pulsed electron beam reactor, operating with a dose per pulse of less than 1 kGy/pulse and pulse repetition rate of less than 10 kHz, will have the same plasma chemistry efficiency (parts per million of removed NO{sub x} per kGy of electron beam dose) as an electron beam reactor operating with a low dose rate of 50 kGy/s in continuous mode. Ozone accumulation is a limiting factor under high pulse frequency conditions. The total dose requirement determines the optimum combination of dose per pulse and pulse frequency for both radical utilization and prevention of ozone buildup

Sulfur Tolerance of Selective Partial Oxidation of NO to NO2 in a Plasma

Several catalytic aftertreatment technologies rely on the conversion of NO to NO2 to achieve efficient reduction of NOx and particulates in diesel exhaust. These technologies include the use of selective catalytic reduction of NOx with hydrocarbons, NOx adsorption, and continuously regenerated particulate trapping. These technologies require low sulfur fuel because the catalyst component that is active in converting NO to NO2 is also active in converting SO2 to SO3 . The SO3 leads t o increase in particulates and/or poison active sites on the catalyst. A non-thermal plasma can be used for the selective partial oxidation of NO to NO2 in the gas-phase under diesel engine exhaust conditions. This paper discusses how a non-thermal plasma can efficiently oxidize NO to NO2 without oxidizing SO2 to SO3

Nonthermal aftertreatment of diesel engine exhaust

The ultimate objective of this work has been to develop a nonthermal plasma process to reduce NO{sub x} in diesel exhaust gas. A secondary objective has been to study the possibility of particulate matter (soot) reduction by the same technique. The early work revealed a fundamental difficulty with this NO{sub x} reduction approach in the gas environment of the diesel engine exhaust. These observations necessitated a thorough study of the unfavorable chemistry in the hope that knowledge of the chemical mechanism would offer an opportunity to make the approach useful for NO{sub x} reduction. Whereas fundamental understanding of the mechanism has been obtained, the authors have not found any measure that would make the approach meet its original objective

Tabletop X-ray Lasers

Details of schemes for two tabletop size x‐ray lasers that require a high‐intensity short‐pulse driving laser are discussed. The first is based on rapid recombination following optical‐field ionization. Analytical and numerical calculations of the output properties are presented. Propagation in the confocal geometry is discussed and a solution for x‐ray lasing in Li‐like N at 247 Å is described. Since the calculated gain coefficient depends strongly on the electron temperature, the methods of calculating electron heating following field ionization are discussed. Recent experiments aimed at demonstrating lasing in H‐like Li at 135 Å are discussed along with modeling results. The second x‐ray laser scheme is based on the population inversion obtained during inner‐shell photoionization by hard x rays. This approach has significantly higher‐energy requirements, but lasing occurs at very short wavelengths (λ ≤ 15 Å). Experiments that are possible with existing lasers are discussed

EUV spectra of highly-charged ions W54+^{54+}-W63+^{63+} relevant to ITER diagnostics

We report the first measurements and detailed analysis of extreme ultraviolet (EUV) spectra (4 nm to 20 nm) of highly-charged tungsten ions W$^{54+}$ to W$^{63+}$ obtained with an electron beam ion trap (EBIT). Collisional-radiative modelling is used to identify strong electric-dipole and magnetic-dipole transitions in all ionization stages. These lines can be used for impurity transport studies and temperature diagnostics in fusion reactors, such as ITER. Identifications of prominent lines from several W ions were confirmed by measurement of isoelectronic EUV spectra of Hf, Ta, and Au. We also discuss the importance of charge exchange recombination for correct description of ionization balance in the EBIT plasma.Comment: 11 pages, 4 figure

Non-thermal plasma techniques for abatement of volatile organic compounds and nitrogen oxides

Non-thermal plasma processing is an emerging technology for the abatement of volatile organic compounds (VOCs) and nitrogen oxides (NO{sub x}) in atmospheric-pressure air streams. Either electrical discharge or electron beam methods can produce these plasmas. Each of these methods can be implemented in many ways. There are many types of electrical discharge reactors, the variants depending on the electrode configuration and electrical power supply (pulsed, AC or DC). Two of the more extensively investigated types of discharge reactors are based on the pulsed corona and dielectric-barrier discharge. Recently, compact low-energy (<200 keV) electron accelerators have been developed to meet the requirements of industrial applications such as crosslinking of polymer materials, curing of solvent-free coatings, and drying of printing inks. Special materials have also been developed to make the window thin and rugged. Some of these compact electron beam sources are already commercially available and could be utilized for many pollution control applications. In this paper we will present a comparative assessment of various nonthermal plasma reactors. The thrust of our work has been two-fold: (1) to understand the scalability of various non-thermal plasma reactors by focusing on the energy efficiency of the electron and chemical kinetics, and (2) to identify the byproducts to ensure that the effluent gases from the processor are either benign or much easier and less expensive to dispose of compared to the original pollutants. We will present experimental results using a compact electron beam reactor and various types of electrical discharge reactors. We have used these reactors to study the removal of NO{sub x} and a wide variety of VOCS. We have studied the effects of background gas composition and gas temperature on the decomposition chemistry

Ultrashort filaments of light in weakly-ionized, optically-transparent media

Modern laser sources nowadays deliver ultrashort light pulses reaching few cycles in duration, high energies beyond the Joule level and peak powers exceeding several terawatt (TW). When such pulses propagate through optically-transparent media, they first self-focus in space and grow in intensity, until they generate a tenuous plasma by photo-ionization. For free electron densities and beam intensities below their breakdown limits, these pulses evolve as self-guided objects, resulting from successive equilibria between the Kerr focusing process, the chromatic dispersion of the medium, and the defocusing action of the electron plasma. Discovered one decade ago, this self-channeling mechanism reveals a new physics, widely extending the frontiers of nonlinear optics. Implications include long-distance propagation of TW beams in the atmosphere, supercontinuum emission, pulse shortening as well as high-order harmonic generation. This review presents the landmarks of the 10-odd-year progress in this field. Particular emphasis is laid to the theoretical modeling of the propagation equations, whose physical ingredients are discussed from numerical simulations. Differences between femtosecond pulses propagating in gaseous or condensed materials are underlined. Attention is also paid to the multifilamentation instability of broad, powerful beams, breaking up the energy distribution into small-scale cells along the optical path. The robustness of the resulting filaments in adverse weathers, their large conical emission exploited for multipollutant remote sensing, nonlinear spectroscopy, and the possibility to guide electric discharges in air are finally addressed on the basis of experimental results.Comment: 50 pages, 38 figure