20,600 research outputs found

    Combined production of broilers and fruits

    Get PDF
    Combined production of broilers and fruit trees is a subject often discussed in organic fruit production in Denmark. Very little research has been carried out on this type of production system. In organic production in Denmark, nearly no pesticides are allowed, so the need for alternative pest control is large. Apple sawfly (Hoplocampa testudinea) and pear midge (Contarinia pyrivora) cause big crop losses in apples and pears respectively, in unsprayed organic fruit production. Both insects infest fruitlets and cause these to drop prematurely after which the pests pupate in the topsoil. In the present experiment a research orchard with the varieties ‘Discovery’ and ‘Conference’ were used as outdoor area for broilers to minimise the population of sawflies and pear midges, and to reduce the need for weeding and manuring. The trees were kept unsprayed. Fruit yield and fruit quality were assessed at harvest. White sticky traps were placed in the test area in order to measure the occurrence of sawfly over time. The infestation of pear midge was investigated counting the infested fruitlets in clusters on trees at the centre of the plots. The catch of apple sawflies was reduced in the combined apple and broiler production, but no significant effect on the yield or the fruit quality was seen. Experiences from on-farm research show that combining fruit and egg-production is one way to reduce the problem with apple sawfly, but poultry alone is not a sufficient way of controlling sawflies. The welfare and health of the broilers were excellent under fruit trees

    The ac-Driven Motion of Dislocations in a Weakly Damped Frenkel-Kontorova Lattice

    Full text link
    By means of numerical simulations, we demonstrate that ac field can support stably moving collective nonlinear excitations in the form of dislocations (topological solitons, or kinks) in the Frenkel-Kontorova (FK) lattice with weak friction, which was qualitatively predicted by Bonilla and Malomed [Phys. Rev. B{\bf 43}, 11539 (1991)]. Direct generation of the moving dislocations turns out to be virtually impossible; however, they can be generated initially in the lattice subject to an auxiliary spatial modulation of the on-site potential strength. Gradually relaxing the modulation, we are able to get the stable moving dislocations in the uniform FK lattice with the periodic boundary conditions, provided that the driving frequency is close to the gap frequency of the linear excitations in the uniform lattice. The excitations have a large and noninteger index of commensurability with the lattice (suggesting that its actual value is irrational). The simulations reveal two different types of the moving dislocations: broad ones, that extend, roughly, to half the full length of the periodic lattice (in that sense, they cannot be called solitons), and localized soliton-like dislocations, that can be found in an excited state, demonstrating strong persistent internal vibrations. The minimum (threshold) amplitude of the driving force necessary to support the traveling excitation is found as a function of the friction coefficient. Its extrapolation suggests that the threshold does not vanish at the zero friction, which may be explained by radiation losses. The moving dislocation can be observed experimentally in an array of coupled small Josephson junctions in the form of an {\it inverse Josephson effect}, i.e., a dc-voltage response to the uniformly applied ac bias current.Comment: Plain Latex, 13 pages + 9 PostScript figures. to appear on Journal of Physics: condensed matte

    A mapping approach to synchronization in the "Zajfman trap": stability conditions and the synchronization mechanism

    Get PDF
    We present a two particle model to explain the mechanism that stabilizes a bunch of positively charged ions in an "ion trap resonator" [Pedersen etal, Phys. Rev. Lett. 87 (2001) 055001]. The model decomposes the motion of the two ions into two mappings for the free motion in different parts of the trap and one for a compressing momentum kick. The ions' interaction is modelled by a time delay, which then changes the balance between adjacent momentum kicks. Through these mappings we identify the microscopic process that is responsible for synchronization and give the conditions for that regime.Comment: 12 pages, 9 figures; submitted to Phys Rev

    Slow-light enhanced light-matter interactions with applications to gas sensing

    Full text link
    Optical gas detection in microsystems is limited by the short micron scale optical path length available. Recently, the concept of slow-light enhanced absorption has been proposed as a route to compensate for the short path length in miniaturized absorption cells. We extend the previous perturbation theory to the case of a Bragg stack infiltrated by a spectrally strongly dispersive gas with a narrow and distinct absorption peak. We show that considerable signal enhancement is possible. As an example, we consider a Bragg stack consisting of PMMA infiltrated by O2. Here, the required optical path length for visible to near-infrared detection (~760 nm) can be reduced by at least a factor of 10^2, making a path length of 1 mm feasible. By using this technique, optical gas detection can potentially be made possible in microsystems

    Inducing spin-dependent tunneling to probe magnetic correlations in optical lattices

    Full text link
    We suggest a simple experimental method for probing antiferromagnetic spin correlations of two-component Fermi gases in optical lattices. The method relies on a spin selective Raman transition to excite atoms of one spin species to their first excited vibrational mode where the tunneling is large. The resulting difference in the tunneling dynamics of the two spin species can then be exploited, to reveal the spin correlations by measuring the number of doubly occupied lattice sites at a later time. We perform quantum Monte Carlo simulations of the spin system and solve the optical lattice dynamics numerically to show how the timed probe can be used to identify antiferromagnetic spin correlations in optical lattices.Comment: 5 pages, 5 figure

    Antiferromagnetic noise correlations in optical lattices

    Full text link
    We analyze how noise correlations probed by time-of-flight (TOF) experiments reveal antiferromagnetic (AF) correlations of fermionic atoms in two-dimensional (2D) and three-dimensional (3D) optical lattices. Combining analytical and quantum Monte Carlo (QMC) calculations using experimentally realistic parameters, we show that AF correlations can be detected for temperatures above and below the critical temperature for AF ordering. It is demonstrated that spin-resolved noise correlations yield important information about the spin ordering. Finally, we show how to extract the spin correlation length and the related critical exponent of the AF transition from the noise.Comment: 4 pages, 4 figure

    Ptychographic X-ray computed tomography of extended colloidal networks in food emulsions

    Get PDF
    As a main structural level in colloidal food materials, extended colloidal networks are important for texture and rheology. By obtaining the 3D microstructure of the network, macroscopic mechanical properties of the material can be inferred. However, this approach is hampered by the lack of suitable non-destructive 3D imaging techniques with submicron resolution. We present results of quantitative ptychographic X-ray computed tomography applied to a palm kernel oil based oil-in-water emulsion. The measurements were carried out at ambient pressure and temperature. The 3D structure of the extended colloidal network of fat globules was obtained with a resolution of around 300 nm. Through image analysis of the network structure, the fat globule size distribution was computed and compared to previous findings. In further support, the reconstructed electron density values were within 4% of reference values.Comment: 19 pages, 4 figures, to be published in Food Structur

    Canted antiferromagnetism in phase-pure CuMnSb

    Full text link
    We report the low-temperature properties of phase-pure single crystals of the half-Heusler compound CuMnSb grown by means of optical float-zoning. The magnetization, specific heat, electrical resistivity, and Hall effect of our single crystals exhibit an antiferromagnetic transition at TN=55 KT_{\mathrm{N}} = 55~\mathrm{K} and a second anomaly at a temperature T∗≈34 KT^{*} \approx 34~\mathrm{K}. Powder and single-crystal neutron diffraction establish an ordered magnetic moment of (3.9±0.1) μB/f.u.(3.9\pm0.1)~\mu_{\mathrm{B}}/\mathrm{f.u.}, consistent with the effective moment inferred from the Curie-Weiss dependence of the susceptibility. Below TNT_{\mathrm{N}}, the Mn sublattice displays commensurate type-II antiferromagnetic order with propagation vectors and magnetic moments along ⟨111⟩\langle111\rangle (magnetic space group R[I]3cR[I]3c). Surprisingly, below T∗T^{*}, the moments tilt away from ⟨111⟩\langle111\rangle by a finite angle δ≈11∘\delta \approx 11^{\circ}, forming a canted antiferromagnetic structure without uniform magnetization consistent with magnetic space group C[B]cC[B]c. Our results establish that type-II antiferromagnetism is not the zero-temperature magnetic ground state of CuMnSb as may be expected of the face-centered cubic Mn sublattice.Comment: 14 pages, 15 figure
    • …
    corecore